Reviews Eccentric Reducer Pipe

Stanley Proto J140SET Proto 4 Piece Internal Pipe Wrench

  • Ideal for removing broken threaded pipe ends, plugs and fittings.
  • Installation and removal without thread damage.
  • Eccentric cam action engages wrench against the walls of the pipe.
  • Hex body allows for use of adjustable wrench for added torque.
  • Made from hardened steel and plated to help prevent rust, Made in USA.
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

DERNORD Tri Clamp Bowl Reducer Sanitary Fitting Stainless Steel 304 (Tri Clamp Size: 4 inch x 2 inch)

  • Bowl Reducer fitting to connect two pipes of different diameters that are along the same pipe axis.
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless steel 304 for resistance to corrosion and high temperatures.
  • Tri Clamp Bowl Reducer Ferrule Size 119MM fits 4" tri clamp.
  • Tri Clamp Bowl Reducer Ferrule Size 64MM fits 2" tri clamp.
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock

QMINOX 2 Inch × 1.5 Inch Sanitary Fitting End Cap Reducer Stainless Steel 304 Sanitary Concentric Reducer Tri Clamp Clover

  • End Cap Reducer Ferrule Size 64mm = 2 Inch Tri Clamp.
  • End Cap Reducer Ferrule Size 50.5mm = 1.5 Inch Tri Clamp.
  • Concentric End Cap Reducer Fitting to Connect 2 Pipes of Different Diameters That are Along The Same Pipe Axis.
  • Sanitary Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.
  • Stainless Steel 304 Sanitary Fitting for Resistance to Corrosion and High Temperatures.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

GASHER 26PCS Brass Pipe Fitting Kit, Hex Bushing, Reducer Adapter, Hex Nipple, 90 Degree Barstock Street Elbow

  • 【DURABLE】Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
  • 【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
  • 【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • 【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..
  • 【INCLUDE】1 x 1/4 Tee Fitting, 4 x1/4 Elbow Fitting, 4 x 1/8 Elbow Fitting, 1 x1/4 Coupling, 1 x 3/8-1/4 Nipple & Reducer & Bushing, 1 x 1/4-1/8 Nipple & Reducer & Bushing.
Check Stock

New WATTS LFN55BM1 Water 50PSI Bronze 3/4 in NPT Pressure REDUCING Valve B317144

  • This pressure reducer valve adopts piston structure, simple internal structure, strong environmental use, durable..
  • No bypass pipe is required, and the distribution pipe is simple, which can save a lot of space and distribution cost..
  • It can be installed in front of most tap water equipment..
  • There is pressure adjustment knob in the top cover, which can be adjusted free..
  • Connector: DN25 32mm, Inlet / outlet thread depth: 17mm / 0.67in, Inlet pressure: 1.6Mpa (Max) / 232psi..
Check Stock

DOITOOL 4 pcs Machine Accessories Tattoos Brass for Wrench Mm Hexagon Cam Adjustable Rotary Socket with Machines Tattoo Motor Eccentric Professional Parts Screw Wheel Hex Wheels

  • TATTOO ECCENTRIC WHEEL-- It is and store, suitable for most tattoos engines to use..
  • ECCENTRIC WHEEL FOR TATTOOS MACHINE-- The design of the eccentric wheel can drive the tattoos needle to work..
  • SEMICIRCLE ECCENTRIC WHEEL-- Made of premium alloy material, and not easy to damage..
  • ECCENTRIC WHEEL FOR TATTOO MACHINE-- cam for rotary tattoos machines. Easy to install on tattoos machine..
  • TATTOO BEARING ACCESSORIES-- Fits many rotary tattoos machines on the market, will be a for your tattoos art..
Check Stock

Bailey SA Series Bearing Insert - Radial Insert Ball Bearing for High Speed Applications - Ball Bearing Steel Insert - Spherical OD Eccentric Collar - 1” ID, 2.0472” OD, Steel, 2.56 Ounces, 150854

  • SPECIFICATIONS: Our SA series radial insert ball bearings for agricultural equipment come with an eccentric shroud sleeve, have 1” inner diameter, 2.0472” outer diameter, and are made of steel. The bearing insert weighs 2.56 ounces..
  • PRECISE: The bearing bushing has an eccentric collar that allows high-speed shafts to perform eccentric functions without an eccentric axis. This eccentric bearing offers precision and efficiency in rugged agricultural applications..
  • PROTECTIVE: The eccentric locking collar in the peer bearing can handle a high degree of vibration. These collar bearings protect machinery against damage caused by vibration. These are also double sealed to reduce harm from fibers..
  • STURDY: This independent plain bearing 1 in. id is made from high-quality steel, with precision-hardened inner rings for added strength. It has a high shock absorption capacity and does not crack under pressure. Our bearing collar is made to last..
  • CONVENIENT: These sealed regreasable spherical bearings are simple to use, efficient in operation, and extremely convenient. They are useful in a number of high-speed, high-vibration applications and can be used in rugged conditions with ease..
Check Stock

10AN Femlae to 8AN Male Flare Reducing Hose Union Fittings Aluminum AN10 to AN8 Reducer Fuel Oil Line Adapter Black

  • JIC -10 AN (7/8-14) UNF female to male flare -8 AN (3/4"-16) UNF Thread expander / reducer pipe connector.
  • Made of High Performance Lightweight 6061 T6 CNC Machined Billet Aluminum Material.
  • Black anodized finish for durability, long last and strength.
  • Universal fit. such as: Oil/ Fuel/ Water/ Gas/ Fluid/ Air Line.
  • AN Female to Male Oil Fuel Line Pipe Redecer Extensions Fitting Adapter.
Check Stock

YaaYii 70 Pcs 3-in-1 eccentric bolt Wheels Furniture Connecter Cam Lock Fittings with Dowels 12 * 11.8mm 15 13mm for Wardrobe Cabinet & Drawer Dresser, Silver, 15.*13mm ，15*11.8mm，12*12.2mm，12*11.3mm

  • Type：20Pcs 40mmDowels 15Pcs15*13mm Eccentric Wheels 15Pcs12*12.2mm Eccentric Wheels 10Pcs15*11.8mm Eccentric Wheels 10Pcs12*11.8mm Eccentric Wheels with 4Pcs extra Eccentric Wheels for gifts..
  • Suitable for: panel connection, office furniture, wardrobe cabinet and drawer dresser and more panel-type furniture connecting..
  • Product advantages: Consider your situation, choose the fitness furniture cam dowel to change, convenient to assemble and disassemble. several sizes satisfied your all round needs..
  • Guarantee: We believe that the quality of our furniture fasteners is 100% qualified. If you have any questions, please feel free to contact us. We will provide you with the best service..
Check Stock