Reviews Easy to store Welding Stick Holder

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

ARC Stick Welder 200Amp 110V Welding Machine, Mini Welder Machine Beginners Welder With Display LCD Use Welding Rod Tools

  • ☢【Powerful Stick Welder 110v】Welding machine delivers the stable current that can make the welder reduce the damage of copper and iron, increase the welding frequency, and optimize the energy efficiency. The stick welding machine with a high -performance fan has a strong heat dissipation to keep it cool. Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current.
  • ☢【Safe and Stable Welding Machine 110v】Arc welder machine adopts automatic compensation for fluctuation, under-voltage protection, over-voltage protection, over current protection, and no electromagnetic noise mechanism that enables safe operation. Start arc easily, stable welding arc,optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
  • ☢【Light Duty Welding Machine】Mini welder machine But Big Power. This 110v arc welder features an easy carrying handle, portable carry with adjustable shoulder strap, compact light-weight design, it is convenient for welding indoors and outdoors. So you can work smarter not harder by bringing the welder to the work, the welder machine can be used anywhere y....
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • Easy To Use - MIG welding is easy to do with the MIG180. With the welding machine being wire feed, most people find it easier to use than other welding methods. The MIG180 allows you to create excellent, intricate welding designs..
  • Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
  • Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located ....
Check Stock

LDHTHOPI MIG Welder, 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder

  • 【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with function switching, voltage control knob and wire speed adjustment knob. With synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. And the smart digital display makes the operation easier for you..
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-160A. Duty cycle: 45%-160A at 40 °C. It adopts the advanced IGBT inverter technology with excellent arc stability. Suitable for welding carbon steel, iron, stainless steel, and other metals. Machine with current display can read the current and voltage. The MIG mode can select flux cored welding wire in 0.024"(0.8mm) and 0.03'(0.9mm), ARC(Stick/MMA) mode fits rods..
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The welders will automatically shut down when overheated and overload. Also machine energy-saving and Fan cooling system will works when needed, reduce the dust into machine also provide long life us....
Check Stock

MIG Welder ，MYYWELD Welding Machine 160A 3 in 1 MMA/MIG/LIFT TIG Welder Machine with IGBT Inverter，Flux Core Welder Gas/Gasless Welding Wire Dia 0.8-1.0 mm 2lbs Welding Wire Stick Welder 220V

  • 1.EASY TO USE-This welder is a perfect entry level dual digital display easy to read and set. Besides, the welder machine uses 0.8mm.or 1.0mm flux....
  • 2.BROADLY APPLIED- Our stick welder is a wide range of uses-suitable for basic DIY such as household welding, hanger, covering, guardrail, Repair,....
  • 3.IGBT TECHNOLOGY -Using IGBT inverter technology gives a more stable performance than traditional welder. It has the following advantages--stable....
  • 4. MULTIPLE WELDING-MIG/lift TIG/stick/MMA welding machine,gas/gasless modes all are available. Can be used for welding kinds of metals. Meeting....
  • 5. THE PACKAGE INCLUDS -1 MIG-160Welder Machine, 1 welding holder, 1 ground clamp ,1 welding torch, 2 hose clamps , 2lbs welding wire, 1 transparent....
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

4pcs Arrow Welding Magnets -2 pcs 4\ 50 lbs and 2 pcs 5\ 75 lbs Strength Welding Magnets and Clamps Magnetic Welding Holder Metal Working Mig Tools Workshop Welder 45,90,135,180 Degree Angle

  • STRONG POWER: 4 pieces of arrow welding magnets with 2pcs 50lb angle magnets and 2pcs 75lb angle magnets are strong power that can stick solidly to any ferrous metal object and free your hands for easy, secure, and efficient welding works.
  • SAFE & SECURE: The welding magnet and magnetic welding holders can grip the metal and hold it at the angle you need to work safely. Also, the bright red color will help you locate it easily, making your welding job more efficiently and precisely.
  • THREE ANGLES: Heavy-duty arrow design welding square magnet supports metal parts at 45°, 90°, and 135° for easy access. The center hole on the magnets allows the magnet to align itself with the tubing in a self-centering fashion helping you to more easily grab the welding magnet.
  • MULTIPURPOSE: Welding magnets connect parts, freeing up your hands for efficient work and improving work safety, and can also be used as a floater to separate steel plates or used as a double-sided holder for welding, assembly, and marking work to meet your different need.
  • BUILT TO LAST: Constructed of high-quality stainless steel with a powder-coated finish, these welding magnets are durable, long-lasting, and resistant to rust and corrosion. Ideal for being used as a holder and positioner in weld....
Check Stock

MMA Welder,160A ARC Welder Machine IGBT Inverter Digital Display LCD Hot Start Welder with Welding Stick Electrodes| Electrode Holder| Work Clamp| Input Power Adapter Cable| Brush 110V Home Use

  • 【Smart LED Simple to Operate】- The arc welder is so easy to use that it can be used for practicing and for small welding operations to become a master welder. Equipped with smart digtal display and alarm LED,read the output welding current. Built-in excellent anti-stick, dig-arc force, hot start and other functions,easy to operate,safe and convenient for beginners especially. No matter is man or woman welders can quickly learn how to welding..
  • 【Safe& Stable】- Closed-loop feedback control, built-in fan and ultra-low voltage intelligent regulator on the machine, stable output voltage, easy to start in unstable voltage area. Features with over current protection and over load protection to ensure safety. Excellent Arc stability..
  • 【Portable Carry Design】- The arc welder is compact and lightweight, easy to movement and store. The stick welder features a easy carrying handle handle, easy to carry and can be moved to any place. Portable carry with adjustable shoulder strap,is convenient to carry between job sites or use..
  • 【It Can Endure Whole Day Welding】- The Arc welder can perfectly finish 1.6mm- 4mm Welding Stick Electrodes for whole day welding as this is a household smart welder with high frequency and great working efficiency. It is appli....
Check Stock

4Pcs 4' 50 LB Welding Magnets and Clamps Metal Working Mig Tools and Equipment Magnetic Welding Holder Clamps Workshop Welder Soldering, 45, 90, 135 Degree Angle Magnet Arc Welding Electrode Holders

  • STRONG POWER: Spurtar Angle Welding Magnet can hold and support any ferrous metal objects up to 50 lbs. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright red color will help you locate it more easily..
  • SAFE & SECURE: These magnetic welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: These welding magnets and clamps connect parts, freeing up your hands for efficanciacy work and improve work safety, and it can also be used as a floater to separate steel plates.
  • PREMIUM WELDING TOOL: Made of high-quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion. Spurtar Magnet Holder Makes your welding job more efficiently and precisely..
Check Stock