Reviews Easy To Install Vise

MYTEC Home Vise Clamp-On Vise，2.5

  • HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

MYTEC Home Vise Clamp-On Vise , 3.0"

  • HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

  • 【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
  • 【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
  • 【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
  • 【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
  • 【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..
Check Stock

Kreg KBC3-VISE Automaxx Clamp Vise 3 Inch

  • A multipurpose vise system that’s easy to install and use.
  • Includes one 3" (76mm) Bench Clamp, one anodized aluminum Clamp Vise Plate, two Bench Dogs, two Clamp Blocks, mounting hardware.
  • Mounts to work surfaces from 1" to 2" thick.
Check Stock

Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue

  • 4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
  • Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
  • Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
  • The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
  • Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
  • Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.
Check Stock

PONY Bench Vise 5 Heavy-Duty Utility Combination Pipe Home Vise Swivel Base Bench for Woodworking One-Pair Vise Jaw Pad Included

  • Multi-Jaw Function: This Multi-Jaw is applicable for clamping flat material, pipe and tube. Anti-slipping, avoid scratches and damages to items that....
  • Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of....
  • Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table.....
  • Swivel Feature: 360 degree swivel design. It also features a swivel base, and allows an ever greater degree of accuracy while you are working with a....
  • Large Capacity: Anvil Area: 2-3/4 inch * 2-3/4 inch, Throat Depth: 3-1/2 inch, Jaw Opening: 4 inch, Jaw Width: 5 inch. Reach up to 3968 lbs. of....
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

Rockler Quick Release Front Vise – 9” Woodworking Vise Dual Guide Rods Eliminate Racking – Easy to Operate Wood Vise for Home, Studios, Teaching Equipment - Bench Vise Woodworking

  • Woodworking Vise For Workbench: This powerful workbench wood vise is perfect for custom workbenches. Sturdy dual guide rods eliminate racking, while the quick-release feature lets you slide the vise all the way open or closed with an easy 1/4 turn..
  • Convenient Design: Slides open or closed in seconds! You can easily mount this workbench wood vise. The 9-inch guide bar's convenient design makes it easy to work and holds things more firmly..
  • Solid Construction: The woodwork vise has an iron and steel structure. The guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. This vise for woodworking also has a solid hardwood handle..
  • Easy To Use: Simply pull up on the handle and hold, this will cause the bench front vise nut to disengage. Adjust the wooden jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the front..
  • Widely Applied: The workbench vise clamps for woodworking are a great solution for wood shops and woodworking studios. Our quick release vise bench is easy to mount with 1/4" lag bolts (not included)..
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 4\ - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 4" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our soft vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gunsmithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

JCL Vise Jaws - Nylon, Multipurpose 6' - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

  • Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place..
  • Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories..
  • Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more..
  • 8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • ...quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • ...quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause severe injury to your eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all instructions outlined in the manual..
  • WARRANTY: Comes with a 1-year limited warranty and 90-day return..
Check Stock