Reviews E Paper Display Arduino 2

Freenove I2C LCD 1602 Module (2 Pack), New Type IIC TWI Serial 16x2 Display, Compatible with Arduino Raspberry Pi Pico ESP32 ESP8266

  • LCD 1602 -003e Can display 2 lines of characters, 16 for each..
  • New model -003e Integrate the conversion circuit on the screen..
  • 0x27 for 8574T and blank chip. (Refer to "About_I2C_Address.pdf" in downloaded file for details.).
  • Demo project -003e For mainstream models of Arduino / Raspberry Pi / Raspberry Pi Pico / ESP32 / ESP8266..
  • Tutorial and code -003e The download link can be found on the product box. (No paper tutorial.).
Check Stock

Ingcool 2.9inch e-Ink Display Module, 296x128 Resolution Two-Color e-Paper Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo,SPI Interface Support Partial Refresh

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
  • Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on..
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/Nucleo, etc..Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

  • What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
  • Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
  • Operating temperature: -40 - 85 degree....
  • Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

WS2812B 5V RGB LED Light Strip Individually Addressable 1M 144 LED Dream Color Waterproof IP67 Whiteboard PCB Light Strip

  • 1. 144 individually addressable RGB SMD5050 per meter, waterproof IP67, white PCB, DC5V. Do not try to use DC12V or DC24V power supply, otherwise it will burn..
  • 2. WS2812B light bar is a separately controllable LED pixel strip with more interesting 256 brightness display and 24-bit color display. . Each pixel has its own color and brightness. You can control them separately and set any color or animation according to your needs..
  • 3. Suitable for Arduino, Raspberry Pi, Teensy, T1000S, K1000C and other programmable controllers. Supports APP controllers such as SP110E SP105E SP108E SP110E, and smart WiFi Alexa controllers such as SP501E. (Does not include power adapter or controller). Easy to program..
  • 4. Has a 3-pin JST-SM connector with separate power/ground wires on both ends. Each LED can be cut off without damaging the remaining strip. You can freely shorten, lengthen or bend it to the desired length..
  • 5. WS2812B can be used to make LED screens and LED walls, which are widely used in hotels, KTVs, bars, outdoor advertising signs, Christmas or wedding decorations, etc..
Check Stock

Note Tower Desktop Pro Document Holder - 2 Page Paper Holder, Easy Loading for Fast Typing, Displays Papers & Photos, Organizes Sticky Notes, Includes 50 Sheets 3\x3\ Sticky Notes, Black

  • 003cp003e✅ DUAL PAGE IN-LINE DISPLAY FOR FAST TYPING - Display 2 pages at once & double your paper referencing003c/p003e.
  • 003cp003e✅ EASY ONE-HAND PAPER LOADING BOOSTS PRODUCTIVITY - Work faster with the quick interchange of documents003c/p003e.
  • 003cp003e✅ REDUCES EYE & NECK STRAIN – Displays multiple documents, notes and photos right where you need them003c/p003e.
  • 003cp003e✅ COMPACT & LIGHT WEIGHT – Clever flexible clips, light weight folding arms & compact tower design003c/p003e.
  • 003cp003e✅ GRIPS TO DESK, RE-POSITIONS EASY, WON’T MARK YOUR DESKTOP - Fitted with Innovative grip pads003c/p003e.
Check Stock

Arduino MKR IoT Bundle [GKX00006]

  • Learn the basics behind the Internet of Things, build your own connected devices, and control your Arduino MKR 1000 board over the Internet..
  • With 5 step-by-step tutorials on Arduino’s online platform, includes all the components needed for those and more!.
  • Connect to the dashboard of Arduino’s IoT Cloud: log, graph and analyze sensor data, trigger events, and automate your home or business..
  • Display information locally using the LCD display, or activate mechanical devices with one of the two motors in the kit..
  • Power the board from the USB port, or using the included battery connector (battery not included)..
Check Stock

1.54 Inch E-Paper Screen Display Module Resolution 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

SEZO WS2812B Panel RGB 5050SMD 16x16 256 Pixels Digital Flexible Individually Addressable for Arduino LED Programmed Panel Screen Image Video Display Full Color Lighting DC5V

  • [Smart device] Each LED controlled by integrated circuit, which is individually addressable. You can set each LED as you wish to scroll messages or....
  • [Safe to use] DC5V input and working. Unlike the traditional LED panel which has many circuit wires and is dangerous to touch, this LED Matrix panel....
  • [Wide compatibility] Works great with Raspberry pi, Arduino or stand-alone ATmega328p setup. And also works directly with SPE105E, SP107E, K1000C,....
  • [Flexible design] You can extend the panel by hooking them up one by one with the 3pin JST connectors. Flexible FPCB can be gently bent and curved....
  • [Wide applications] Used to make LED display, LED wall, advertising board, taxi advertising or information display, music beats display board and so....
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

ALITOVE WS2812B Individually Addressable LED Strip Light 5050 RGB 16.4ft 300 LED Pixel Flexible Lamp Tube Waterproof IP67 Black PCB DC 5V

  • 256 brightness display and 24-bit color display. Each pixel can have its own color and brightness. You can control them individually and set them to any color or animation you want..
  • It can be programmed with Arduino, FastLED library, Raspberry Pi, Fadecandy, T1000S etc. It can also be controlled by SP105E, SP103E, HC008 and other pre-programmed WS2811 controllers..
  • Covered with silicone weatherproof sheathing, which protects it very well and makes it easy to clean. It comes with clips and screws and can be installed easily..
  • Come with 3pin JST-SM connectors and separated power/ground wires on both ends. Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want..
  • Used to make led screen, led wall, advertising board and widely applied to hotel, KTV, bars, Outdoor advertising signs, Christmas or wedding party decoration, and so on..
Check Stock

KEYESTUDIO Multi-Purpose Shield V1 with Buzzer LED Temp Light IR Receiver for Arduino Controller R3 and MEGA2560

  • ...ectronics and programming.Teenagers or adults can learn coding from Scratch to Arduino after assembly and get a lot of fun of making..
  • 【Automatically Drive/Motion Control】-Keyestudio robot kit has many excellent functions, detecting, avoiding and following obstacles.
  • using 8X16 LED panel to display the movement status. You can also use infrared remote control and Bluetooth APP to control it (support iOS and Android).Have fun in the process of learning Arduino..
  • 【Simple Assembly】-With a detailed tutorial for assembling it，and all parts are named and organization. Four cartoon animal heads have been added to the kit so that you can install them on the ultrasound module,assemble with your child, it will be a wonderful experience!.
  • 【Project-Based Tutorials for Coding】-This programmable robot supports Arduino IDE.15 detailed online projects, from simple to complex,easy to learn coding, robotics and electronics through games. Stimulate your creativity through hands-on experience..
  • 【KEYESTUDIO Technical Support】About this stem starter kit,we have a complete graphic description,please search for "KEYESTUDIO ks0428" in Google Chrome, you will get a detailed English User Manual.If there are any problems during use, please fe....
Check Stock

Adafruit Power Relay FeatherWing [ADA3191]

  • High speed SPI display with digital I2C touchscreen driver.
  • Single-touch capacitive touch bonded on top.
  • 240x320 resolution, 18-bit GPU, 262, 000 color - our library uses 16 bit color mode. Ili9341 (data sheet) controller with built in video ram buffer.
  • We also have a touch screen library that detects x, Y and Z (pressure) and example Code to demonstrate all of it. The Code is written for arduino but can be easily ported to your favorite controller.
  • Works with any classic arduino '328. Solder closed three jumpers to use the icsp header for use with leonardo or Mega! 2.8" diagonal color touchscreen TFT.
  • Touchscreen controller requires I2C pins sda and Sca. Microsd pin requires digital #4.
  • That means you can use digital pins 2, 3, 5, 6, 7, 8 and analog 0-5. Pin 4 is available If not using the MicroSD.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock