Reviews Dust Collector Hoses

Dust Right Dust Separator + 36” Flex-Form Hose - Cyclone Dust Collector Separates Sawdust Wood Chips Debris and More – 10-Gallon Translucent Bucket - Dust Collectors for Woodworking for Shop Vacs

  • ...fe: This dust extractor for woodworking extends the life of your filter and impellers by extracting the larger debris before it enters the dust cyclone separator. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters..
  • Adapting Mounting: The five-caster base of the dust collector bucket makes it exceptionally stable and easy to maneuver around the shop. Our dust collector vacuum hoses connect inside the in/out ports, preventing unintentional disconnections..
  • Maintain Airflow: The dust collector creates a cyclonic airflow that causes most wood dust particles and other materials that are heavier than air to separate, and our woodworking dust collector prevents them from being passed to the vacuum..
  • Efficient Dust Collecting: Our 10-gallon translucent dust collector bucket is easy to empty and easy to tell when it's full. Also, this dust collection separator holds twice the capacity of competitor systems..
Check Stock

POWERTEC 70276 4-Inch to 2-1/2-Inch Dust Collection Splitter Fitting

  • INCLUDES: (1) 4” to 2-1/2” Dust Collection Hose Splitter.
  • FUNCTION: Allows you to connect a 4” ID dust hose with two 2-1/2” ID dust hoses, while providing minimal suction loss from your assorted connections.
  • APPLICATIONS: These dust collection fittings are perfect for optimizing the effectiveness of your dust collector system when paired with standard shop vac or other 2.5” hoses.
  • BUILD: This y-adapter splitter is made with impact resistant ABS plastic for long-term durability and a heavy duty profile commonly needed for workshop and woodworking set-ups.
  • PORT DIMENSIONS: 4” Nominal OD – 3.902” or 3-29/32”, ID 3.733” or 3-47/64” 2-1/2” Nominal OD – 2.5” or 2-1/2”, ID – 2.32 “or 2-21/64”.
Check Stock

POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff

  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting.
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up.
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included).
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more.
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat.
Check Stock

POWERTEC 70228 2-1/2 Inch Y-Fitting Dust Collection Hose Connector, Clear Color

  • INCLUDES: 2-1/2” Dust Collection Hose Y-Fitting Connector.
  • FUNCTION: Facilitates a dual hose branch connection from a single main hose line. This versatile fitting enables you to connect two machines - or two hoses from the same machine – to your dust-collection system’s hose network. Maintains the integrity of your dust collector’s suction capacity. Easily tailor your network to the specific requirements of your shop setup and project needs..
  • FEATURES: Fits inside dust collection hoses and secures with band clamps, easy-to-use and versatile design that accommodates a variety of dust collection systems and woodworking power tools with 2-1/2” ID ports..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • DIMENSIONS: All three 2-1/2 Inch nominal end measure 2-31/64 inch OD and 2-7/32 inch ID | Material Thickness: 1/8 inch.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock

POWERTEC 70301 Dust Collection Cyclone Separator Lid Kit w/Flexible Hoses Clamps 2 1/2 inch Elbow & Couplers for 2 Stage Dust Collector

  • KIT INCLUDES: (1) Two Stage Cyclone Separator Lid, (1) Dust Port Elbow, (2) 3’ Flexible Hoses, (2) Quick Coupler Connectors, (2) Hose Clamps.
  • FUNCTION: Cyclone dust collection systems cause a vortex action to trap and collect dust & debris inside the bucket/ barrel before it enters the vacuum, helping to prevent a reduction of suction power..
  • FEATURES: Lid possesses a foam gasket for a tight and reliable seal, elbow fitting on the inlet side to promote cyclonic air flow, ultra flex hoses that expand from 10” to 38-3/4 inches – giving you project versatility and leverage to maneuver your way around workshop machines and space.
  • APPLICATION: Quickly and easily converts your shop vacuum and standard five-gallon buckets container into a 2-stage cyclone dust collection system. Provides the necessary fittings required to connect a shop vac with a 2-1/4” ID inlet to a 2-1/2” OD diameter machine port. Perfect for woodworking, CNC machining, workshops and more.
  • PREMIUM: All cyclone dust collector components (excluding stainless steel hose clamps) are made with super lightweight clog-free ABS plastic material known for its temperature resistance and long-term durability.
Check Stock

JET JW1142 4-Inch Aluminum Blast Gate

  • EFFICIENCY: Maximizes your dust collection system by directing and regulating air flow from one machine to machine..
  • FUNCTIONALITY: Clog-proof design eliminates the need for constant maintenance, along with an easy-sliding gate and locking knob to ensure perfect gate....
  • DURABILITY: Features heavy-duty aluminum construction with a steel gate, designed for eliminating air leakage..
  • UNIVERSAL FIT: Blastgate is compatible with most shop vacs or shop dust collector systems with 4” ID hoses for woodworking..
  • VERSATILITY: A reliable extension port for your table saw, miter saw, planer, drill, and other woodworking machines.
Check Stock

POWERTEC 70238 2-1/2-Inch 45 Degree Elbow, Clear

  • FUNCTION: Allows you to seamlessly extend and /or orient your dust-collection hose network around corners, or into hard to reach areas. This versatile connector enables directional changes while maintaining the integrity of your dust collector’s suction capacity. Easily tailor your hose network to the specific requirements of your shop setup and project needs..
  • VISIBILITY: Premium, clear-plastic tubing lets you clean with clarity, spotting and clearing blockages that may occur at the site..
  • COMPATIBLE: Easy, secure friction fit allows for the secure connection with 2-1/2” ID flexible, dust-collection network hoses. Both 2-1/2-inch nominal ends measure 2-31/64” tapered O.D. and 2-7/32” I.D..
  • CONSTRUCTION: Clear, plastic construction ensures long-lasting durability and dependability..
  • SPECS: Overall size: 4-Inch x 4-Inch x 2-1/2-Inch.
Check Stock

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

Makartt Nail Dust Collector 60W Extractor Vacuum Dust Collector for Nails Acrylic Nail Drill Dust Extractor Nail Salon Equipment with 2 Powerful Nail Fan MK200

  • 2 Strong Dust Fans Collector: Compared with other nail vacuum, Makartt nail dust collector is equipped with 2 strong powerful vacuum dust suction fan motors, with high efficiency in dust cleaning, providing a comfortable filling process for you..
  • Adjustable Suction Nail Vacuum Dust Collector: This nail dust collector machine with the adjustable suction switch, it’s convenient to adjust nail fan suction according to your need. Note: When we use higher suction, the motor in the dust collector will run faster, causing it to make a louder sound..
  • Dust Collector for Nails Salon or Personal Use: The nail dust collector machine can be used to clean nail dust produced by removing gel nail polish, poly nail gel, dipping powder, acrylic nails, nail extension, gel nails, crystal nails, etc. Perfect for personal use or nail salon. Absorb dust from various nail care processes, such as a nail file, nail manicure, nail drill machine etc.
  • Durable Nail Fan Dust Collector: Large cooling holes design on the back, high-speed rotation, continuous heat dissipation, to ensure that the nail dust collector for acrylic nails does not generate heat when working, and prolong the service life. The dust collector for nails is made of high-quality stainless steel, durable to clean ....
Check Stock

POWERTEC 70135 4-Inch Blast Gate for Dust Collector/Vacuum Fittings

  • FUNCTION: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.
  • FEATURES: Self-cleaning and clog proof groove design to eliminate constant cleaning maintenance, along with an easy-sliding gate, and locking stop to ensure perfect gate alignment.
  • BUILD: Blastgate flaunts a heavy duty aluminum construction with a premium steel gate designed for eliminating air leakage, project flexibility and long-term usage.
  • VERSATILITY: Possesses a universal fit (nominal 4”OD outlet diameter, actual size – tapers from 3-29/32 to 3-31/32”) for most shop vacs/ shop dust collector systems with 4” ID hoses for woodworking – providing a reliable port extension for your table saws, miter saws, planers, drills and other tools.
Check Stock

Dust Right 650 CFM Wall Mount Dust Collector 1 Micron – Canister Filter for Portable Dust Collection System – Remote Control Small Dust Collector Shop – Includes Mounting Bracket & Plastic Dust Bag

  • Dust Right Dust Collectors For Woodworking: Premium fabric pleats filter dust down to an incredible 1 micron in size! With this one Rockler dust collection, you'll increase the filtration of your Wall Mount Dust Collector by up to 30 times, giving the air quality in your shop a welcome boost..
  • Included Remote Control: These updated hands free dust collector accessories have a remote control so that you can control your wall dust collector more conveniently and improve your work efficiency..
  • Premium Plated Filter: The premium pleated dust collector filter captures dust down to 1-micron in size, compared to 30 microns for the stock filter bag, and 5 microns for the upgraded dust filter bag. Better filtration amounts to better safety for your lungs..
  • Easy To Use: Our hands-free dust collector is quick and easy to assembly, fully portable, quick-install dust collector bags makes emptying and re-attaching a snap.
  • What’s Included? These dust collector fittings include (1) Dust Right Canister Filter for Wall Mount Dust Collector, (1) Mounting Bracket, and (1) Plastic Dust Bag..
Check Stock

4\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...s a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in....
Check Stock