Reviews Dust Chamber

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

ZVac Replacement Kenmore Style C/Q Micro Filtration Canister Cloth Vacuum Bags Compatible Kenmore 5055, 50557 (Pack of 25)

  • 25 High Quality Total Kenmore Style Canister Cloth Vacuum Bags by ZVac.
  • Designed to fit/Compatible with – Kenmore 5055, 50557, 50562.
  • These bags may appear larger than standard paper bags (aprox 14″ wide x 15″ long) as it is made completely flat with no pleats. However once the bag is mounted on the intake port (inside the dust chamber), simply tuck all the edges of the bag inside to allow the door or hatch to seal completely shut. The bag will then expand to the size of the dust chamber when the vacuum is switched on allowing it to hold more debris than a standard pleated filter bag.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

5 Gallon Vacuum Chamber,Fencia Heavy Duty 5 Gallon Stainless Steel Vacuum Degassing Chamber Kit w/3 CFM Pump Hose (Shipping from USA)

  • ✔️【WORKING PRINCIPLE 】- Heavy duty vacuum chamber is perfect for removing gases from compounds which have become entrapped in the mixture when mixing components.Vacuum chambers are required to assure a bubble-free mold when mixing resin and silicone rubbers and slower setting resins..
  • ✔️【HEAVY DUTY】- Heat cured silicone gasket is chemically resistant to solvents like butane and does not loose vacuum over time.Hydro-tested stainless steel container is high strength, withstands up to 160ºF.Heavy duty 3/4" shatter resistant acrylic crystal lid allows you to see inside and bulletproof..
  • ✔️【EASY TO USE】- Both the release valve and ball valve are built into a single unit for ease of use, brass fittings fit all vacuum pump ports50 micron air button reduces air flow back into the chamber for purging and prevents dust and debris from entering the chamber..
  • ✔️【CONVENIENT】- 9.4.75" x 4.75" non stick silicone pad allows you to easily remove resin mixes.Max vacuum rated to 29.9inHg at sea level.Our vaccum chamber pairs perfectly with single or dual stage 3 to 9 CFM pumps.Our vacuum chamber greatly reduces gas bubbles and pockets that would weaken the epoxy or silicone.Clear lid allows for you to see air being vacuumed out of your res....
Check Stock

Ficero Chamber Safety Flag for Rifle Handguns Shotgun Pistol, Chamber Flag Includes Built-in Flathead Tool with Bonus DIY Key Chain Tags (Pack of 6)

  • Hard but none scratch polymer composite material, won't leave any sign on your firearms..
  • Chamber flag fits snugly in most common rifle and pistol calibers including 9mm, 22lr, .223, 5.56, .308 and .45 ACP.
  • Well Designed & Bright Color, allowing the breach to close and protect the chamber from dust and debris while still proving safe..
  • Includes built-in flathead tool and a slide-on Picatinny rail adapter for conveniently storing your flag between uses without losing it..
  • Comes with 6 PCS chamber safety flags & 6 PCS key chain tags..
Check Stock

Kodak 3D Printer Portrait, White, 21.1 x 20.7 x 20.7 in

  • Dual extrusion with lifting nozzles: print almost any geometry with accuracy and reliability.
  • Fully enclosed chamber: controlling the printing environment is crucial for print quality and safety.
  • Full connectivity: Wi-Fi, usb stick and a great integration with email, file sharing services and social networks. Operating ambient temperature- 10 - 30 ºC.
  • Although open to using third-party filament, Portrait’s cartridges and enclosed chamber prevent KODAK 3D Printing Filament from absorbing humidity or dust.
  • Automatic calibration and leveling for a seamless 3D printing experience.
Check Stock

New Position 3 Gallon Vacuum Chamber Stainless Steel stabilizes Degassing Urethanes, Silicones and Epoxies, High Vacuum Compatible with New Position Vacuum Pump

  • ✅【Good Sealing】 Maintain high vacuum for over 24 hours.(24-hour leak is less than 2.0 inHg).Support vacuum level down to 29.9" Hg.
  • ✅【High Quality】 1/2" Acrylic lid, not only is impact -resistant but also gives a better observation for work.Stainless Steel's resistance to corrosion plus heat and chemical damage is second to none.
  • ✅【High Precision】 The meter is installed in a separate port, so the reading is accurate even when pumping/venting the meter. 50um air filter on the exhaust valve to reduce air flow and prevent dust/dust from flowing into the chamber..
  • ✅【Easy to Install】 Easy to install in less than 5 minutes without any special tools. The Vacuum Chamer comes with 3ft hose and oil filled gauge, can be easily removed with the shut off valve turned..
  • ✅【Widely Application】 3 Gallon Lab Vacuum Chamber kit is used to degass silicones, epoxies, essential oils, and urethanes, etc.Perfect for stabilizing wood and other experiments with volitile compounds..
Check Stock

JET JOSS-S Oscillating Spindle Sander, 1HP, 1Ph 115V (723950)

  • EFFICIENT DUST COLLECTION: Includes a 4" port, and baffles create a chamber under the table for improved dust collection..
  • VERSATILE POSITIONING: Table tilts 45° front and 15° back, and features a 90° quick index..
  • CONVENIENT STORAGE: Cabinet in base provides designated slots for spindles and table inserts..
  • ADDED SAFETY: Integrated paddle switch with safety key..
  • LONG LIFE: Worm and gear mechanism runs in an oil bath to prolong its life and durability..
Check Stock

LANMU Replacement Dust Bags Compatible with Bissell Zing 4122 Series, 2154A, 2154W Canister Vacuum, Compare to Part Number 2138425 (6 Pack)

  • Compatible with Bissell Zing canister models 4122, 4122D, 1668, 1668C, 1668W, 2154A, 2154C, 2154W, 1608 and PowerForce vacuum cleaners. Replace part No. 2138425. Please note this bag are not compatible with 22Q3..
  • It designed with a sturdy cardboard mount with a self-sealing ring to make replacing the bag easy..
  • Open the dust bag chamber, remove the bag by grabbing the dust bag collar and pulling out. Install the new dust bag in place..
  • Regularly replace dust bag to ensure optimum performance. It is recommended that change your zing bag when it is 1/2 to 2/3 full..
  • Package included 6 pack canister filter bags..
Check Stock

Anti-static Conical Burr Coffee Grinder with 48 Grind Settings, binROC Adjustable Burr Mill Coffee Grinder for 2-12 Cups (Stainless Steel)

  • 【Premium Conical Burr】 The electric coffee grinder can precisely grinds slower, creating uniform grounds for optimal flavor extraction. Only for Rated Voltage: 120V, Bean containers and grinding chamber are BPA-free..
  • 【Upgrade Anti-static】 Anti-static technology makes coffee chamber mess-free, preventing coffee grounds from flying around and messing up the worktop..
  • 【Patented Inside Brush】 Improved built-in brush gives you precision cleaning for residual grounds inside without clogging to ensure a natural coffee flavor every time..
  • 【Operation Alert】Please align the scale on the bean hopper with the “Λ” and lower it vertically, then rotate it counterclockwise to the “▲” until it clicks into right place.
  • 【Burr Removable Method】 The “lock” near the burr disc, turn it counterclockwise to the “unlock” and hear “bang” and remove it with force vertically, Please note that after grinding the coffee grounds before removing the burr.
  • 【Easy to Assemble and Clean】The brush included can clean Removable upper burr, hopper, chamber. the resealable dust-proof silicone lid keeps coffee fresher longer..
  • 【Notice】The conical burr should be kept dry after cleaning before putting into the coffee grinder to avoid short circuit..
Check Stock

TENNANT Paper Bag, HEPA Dual Motor Upright Vacuum

  • Prolux strives to consistently offer improved and more user friendly products. For this reason Prolux has dedicated many hours of on site use, lab testing and gathering user feedback to offer an improved 2.0 experience! Improved straps, enhanced "Vortex Chamber", self cleaning upper HEPA filter, insulated Brushless motor and improved seals! These upgrades have improved overall performance, comfort and durability!.
  • CORDLESS PROLUX 2.0 – This vacuum emanates innovation and convenience! New maintenance free brushless motor provides ample power while ensuring longevity. Includes two 30-minute run time batteries. Lightweight! No bags! No cords! …and looks just enough like a jet pack that you may be able to talk your kids into vacuuming for you..
  • PATENTED TECH – “Vortex Chamber” promotes self-cleaning top HEPA filter which eliminates filter clogs. This feature allows no loss of suction from empty to full!.
  • DEPENDABLE - Features a 75 CFM thermal protected motor with Motor Bypass Valve Technology. Never worry about over filling or burning up your motor. Clear dust bin protects from over filling and thermal bypas....
Check Stock

AC Infinity Inline Filter Box 6' with High Efficacy Filter, Whole House HVAC Filtration Kit, Fits 6-Inch Inline Duct Fans for Fresh Air Intake and Ventilation

  • A duct filter box designed for use with inline fans to circulate fresh air and block dust and odors..
  • Built with 1mm thick cold-rolled steel and aluminum duct flanges, able to withstand extreme weather..
  • Slide lock door gives easy access to inner chamber while soft neoprene layer creates dust-free seal..
  • Includes a standard high efficacy filter that traps particles like dust, dirt, lint, and odor..
  • 23.46 x 8.42 x 11.73” | Fits 6” Inline Fans | 800 CFM Maximum | Accepts 12 x 20 x 1” Filters.
Check Stock