Reviews Durable Carbide Tool

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ...ts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
  • Due to the difference between different monitors, the picture may not....
Check Stock

HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/8 Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool

  • ✔Super Value Grout Removal Blade For Oscillating Tool: contains 3pcs 3-5/8 Inch Half-moon carbide grout removal blade which is a great multitool....
  • ✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable,....
  • ✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and....
  • ✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool....
  • ✔ Customer Guaranteed: We provide high super Customer Service. If you are not satisfied with our oscillating carbide grout removal blades for any....
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

HEMUNC 3pcs Oscillating Tool Blades for Grout Removal Tile Mortar Concrete Masonry 1/16, Fit for Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Multitool

  • ... mortar, ceramic grout and soft stone. The Semicircle carbide oscillating grout blade allows you to cut into concrete and defective tile joints with its sharp carbide grains..
  • ✔ High Quality Blade For Oscillating Tool: HEMUNC oscillating carbide grout blades are made by Revolutionary Carbide Technology, robust and durable, which works great for back splashes, wall to floor joints in showers etc., the carbide grit lasts up to 2x longer than similar products in the market..
  • ✔ Widely Use Range: This Universal Fit carbide grout oscillating blades is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projects, and the thickness of the carbide grit is 1/16", perfect for thicker grout removal, it may not work if you have narrow grout lines..
  • ✔ Compatible With Most Oscillating Mulitools: This carbide oscillating grout blades set are compatible with the majority of the oscillating tool brands such as Dewalt Milwukee Rockwell Bosch Dremel Ryobi Ridgid Makita Porter Cable Craftsman Black and Decker and more..
  • ✔ Customer Guaranteed: We provide high super Customer Service. If you are not satisfied with our oscillating carbide grout removal blades for any ....
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • ...e, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacement per package, sufficient quantity for more woodworking lathe projects..
  • 【Excellent Craftsmanship】The aluminum alloy handle of this carbide wood turning chisels tools for wood lathe is sandblasted, which is comfortable, durable and scratch-resistant. Square stainless steel arbor can better keep the lathe tools flat on the tool holder without rolling level with the tool holder, increasing stability..
  • 【Wide Application】This carbide tipped turning chisels set has great performance on a lot of wood turning projects of all sizes. Very simple to use, suitable for all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts..
Check Stock

5pcs Mixed Universal Carbide oscillating Tool Blades Set for Tile Grout Mortar Concrete Masonry

  • ...ent kinds of saw blades. Semicircle, Triangula and Finger Carbide saw blades which are good at grinding tile adhesives, cement, thin-set mortar, rasping wood and stone..
  • [High Quality Saw Blades] Our Oscillating Multi Tool Saw Blades are Made of Carbide Material,robust and durable, which works well when grinding and cutting grout, ceramic tile..
  • [Compatible With Most Oscillating Tools] This mixed carbide multi-tool blades set is compatible with the majority of the oscillating tool brands such as Fein Multimaster, Ryobi, Hitachi, Chicago, Mastercraft, Milwaukee, Ridgid, Black & Decker, Rockwell, Dewalt, Einhell, Porter Cable, Craftsman and more..
  • [Widely Use Range] This Universal Fit Carbide Saw Blade is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projectscontain. It also can meet a variety of needs, which could be used for workshop, household or other place..
  • [Customer Guaranteed] We provide high super Customer Service. If you are not satisfied with our oscillating s....
Check Stock

Carbide Tipped Wood Turning Tools Set Latest Lathe Rougher Finisher Swan Neck Hollowing Tools and Interchangeable Aluminum Alloy Grip Handle with Diamond Round Square Carbide Inserts

  • OUR TURNING SYSTEM INCLUDES - (1) 11'' Tool Handle, (1) 9.8'' Handle Extension, (3) Carbide Cutter Tool Shafts (Circle, Square, Diamond), (1) Swan neck Carbide Cutter Hollowing Tool, (1) T15 Wrench, (1) Allen Wrench, (1) Aluminum Protective Case With Foam Insert..
  • MATERIAL - Tools are made with tungsten carbide tips for extended cutter life, stainless steel arbor for strength and durability, and aluminum oxide alloy handles for grip, comfort, and durability..
  • INDEXABLE CUTTER DESIGN – Indexable carbide cutter inserts can be rotated or replaced to provide a fresh cutting edge whenever needed, ( Click the "Aogbra Store" to order replace carbide cutter inserts when you need ).
  • EASY TO USE – The variable length shaft design and carbide cutters are valuable to all skill levels of woodworkers. Carbide cutters allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools..
  • TOOL DETAILS – Tool shafts are CNC machined from square high carbon steel, making them strong and solid in the hand. The square shaft profile helps keep the tool flat on the tool rest and level with the floor, making them less likely than round shaft tools to roll and shift while on the tool rest..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ... a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ... a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock