Reviews Ductile Iron Flange Adaptor

Martin SDS 2 Quick Disconnect Bushing, Ductile Iron, Inch, 2\ Bore, 2.187\ OD, 1.37\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 2 1/2 Quick Disconnect Bushing, Ductile Iron, Inch, 2.5\ Bore, 2.812\ OD, 1.93\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin E 2 3/8 Quick Disconnect Bushing, Ductile Iron, Inch, 2.38\ Bore, 3.834\ OD, 2.62\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Aexit White Gray Nuts Screw Mounted Cupboard Drawer 3cm Dia Pull Handle Nuts Knob Handle

  • Price For: Each Basic Material: Ductile Iron System of Measurement: Inch Material Grade: Grade 2 Item: Handle Nut Nut Style: Handle Nut Fastener Thread Direction: Right Hand Fastener Thread Type: UNC Dia./Thread Size: 5/16"-18 Flange Dia.: 15/16" Length: 3-3/4" Fastener Finish: Plain Country of Origin (subject to change): Multiple.
Check Stock

TB Woods Type JA JAM14MM Sure-Grip Bushing, Metric, 14 mm Bore, 34.9 mm OD, 25.4 mm Length, 198 lbs/in Torque, Standard Design, Standard Keyway

  • Quick disconnect bushing with a torque capacity of 198 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with quick disconnect bushings from various manufacturers.
Check Stock

4 1/4 Inch Round Shower Floor Drain Grate with 2 Inch Threaded Adaptor and Drain Base Flange, Brushed Gold

  • 【Size】- 4.5" outside diameter, with 4.25" screw mount round drain grate. Base flange connects to 2" or 3" drain waste pipe, fit standard U.S. plumbing connection.
  • 【Material】- This round shower drain made of sus 304 stainless steel, base flange made of ABS. High quality to enhance the longevity.
  • 【Design】- This 4-1/4" round shower drain grate with large aperture grid design to enhance water flowing, height adjustable design with threaded adaptor. Brushed Gold finish to prevent scratches, corrosion and tarnishing.
  • 【Installation】- Fits US NO HUB Drain Base System. Works with maximum 2.36 inch outside diameter and 3 inch inside diameter drain pipe. Can be used in bathroom, kitchen, balcony, roof, garage, basement and toilet, etc..
  • 【Packing】- Come as a combo set, no need to assemble. Complete accessories include square 4 1/4" drain grate, threaded adaptor, rubber gasket, base flange. Brushed Gold finish..
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Mahle 51617 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 41940.010 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock