Reviews Ductile Iron Casting

Pony Jorgensen 2630 3-Inch C-Clamp, Orange

  • Ideal for most do-it-yourself, woodworking and household clamping projects.
Check Stock

Pony Jorgensen 2640 C-Clamp, 4-Inch

  • Ideal for most Do-It-Yourself projects, light duty woodworking projects, and household clamping projects.
  • Zinc plated acme threaded screw and ductile iron clamp casting.
Check Stock

Yost Vises ADI-6 6 Inch 130,000 PSI Austempered Ductile Iron Bench Vise with 360-Degree Swivel Base superseding Yost FSV-6

  • Casting Clamp force: 17, 000 lbs. and Torque rating: 400 Ft-Lb.
  • Made from high-strength 130, 000 PSI Au tempered Ductile Iron castings, 4x stronger than cast iron vises and 50% stronger than Forged Steel Vise (FSV)....
  • Jaw Width: 6" x Jaw Opening: 7. 8" x Throat Depth: 3. 7" x Pipe Capacity: 0. 75"D x 3. 5"D.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.
Check Stock

YOST Vises 750-DI Multi-Jaw Rotating Combination Bench & Pipe Vise with Swivel Base

  • Extreme-Duty Casting Clamp force: 13,400 lbs. and Torque rating: 316 Ft-Lb.
  • Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises.
  • Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125”D x 3.5"D (0.32CM x 8.9CM).
  • Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.No-pinch main screw handle.
  • Machined Q235 steel main screw 0. 75"D with rolled single acme threads at 4 threads per inch.
  • Replaceable Hardened Steel Serrated (Top) Jaws and EXCLUSIVE SELF-ALIGNING Pipe Jaws.
  • 0.51"D x 9. 5" (1.3CM x 24.1CM) Long handle with rubber bumpers.
  • Base mounting tabs: (4) x 9/16"D (14MM), mounting hardware not included..
Check Stock

Pony 6-in C-Clamp Set Clamps for Woodworking,1200lbs Load Limit Ideal for most DIY Woodworking and Household Clamping Projects-2 Pack

  • Features: The maximum throat depth is 3-1/2 inches, the maximum opening capacity is 6 inches..
  • Materials: Clamp casting is made with ductile iron for strength before receiving a powder-coated Pony-orange finish..
  • Comfort of Use: Sliding T-handle offers suitable maximum torque in order to reduce hand fatigue, flexible and smooth threaded rods without stick....
  • Wide Application: Ideal for most do-it-yourself, woodworking and household clamping projects..
Check Stock

Steel Dragon Tools® 74227 H4 Hinged Pipe Cutter 2\ - 4\ Capacity Fits REED® and RIDGID® Cutter Wheel

  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I 03122 cutter wheels (included a.
  • H4 will cut cast iron and ductile iron with Steel Dragon Tools H4I  03122 cutter wheels.
  • Full-closed frame for maximum efficiency under minimal effort..
  • Guide fingers ensure accurate wheel alignment for even cut..
  • Steel Dragon Tools H4 will accept compatible Reed cutting wheels..
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Mahle 51617 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 41940.010 Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel Napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

MAHLE 51870CP Engine Piston Ring Set

  • Highest quality OE replacement piston ring set available - MAHLE replacement ring sets are designed with OE form, fit, and function.
  • MAHLE piston rings feature cast iron or ductile cast iron upper compression rings with a positive twist and barrel face for instantaneous break in.
  • MAHLE second rings provide superior oil control, improved combustion gas management, top ring stability, and sealing providing the best possible oil control and least amount of power loss.
  • MAHLE CP-20 oil rings provide superior oil control in all applications utilizing the exclusive 20 degree ear angle for the best possible side seal in the piston oil ring groove and simplifies installation.
  • MAHLE continues to lead the industry with SAE 9254 high alloy steel napier second rings providing high quality grey iron/ductile iron BT and RBT second rings.
Check Stock

IDEAL Electrical 74-034 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1.25 in. EMT Pipes. Cutters and Benders

  • ... Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1-1/4 in. EMT metal pipes as well as 1 in. Rigid & 1 in. IMC pipes. It uses industrial standard Benfield bending system for bending. Bender handle is also included with the bender head.
Check Stock

Raynesys 4-Inch Bench Vise Ductile Cast Iron Bench Vise with 360° Flexible Swivel Base Heavy Duty Home Work Bench Vice Blue

  • 【Universal 4 Inch Bench Vise】: Jaw Width 4.0inch/10.16cm.
  • Maximum Opening of Jaw is up to 3.5inch/9cm.
  • Throat Depth 2inch/5cm. Clamping Force:....
  • 【Multifunctional】: Mounting vise on the workbench, then you could do the work of woodworking, cutting conduit, drilling, gluing, metalworking,....
  • 【Heavy Duty Casting】: Made of high strength ductile iron and chrome-plated spindle and nuts, durable for long-term use and reliable to grip. The....
  • 【Swivel Feature】: Built in 360 degree swivel base, perfect for a wide range of clamping angles. It allows an ever greater degree of accuracy while....
  • 【Rubber Jaws Covers】: Packaged with 100mm rubber vise jaw covers, can be used on any metal vise for holding wood, metal, plastic, tubing, threaded....
Check Stock

COGNATIVE 5-Inch Heavy Duty Bench Vise Ductile Iron Bench Vise 360° Multi-Purpose Bench Vise with Anvil, Clamp force 4000KG, Blue

  • Durability and Sturdy -- our bench vise is made from high-strength Ductile iron 60,000 PSI, Blue fine powder coated body, zinc plated spare parts for long time use.
  • Ductile Iron body for stronger Clamping Force: 4000kg(8800lbs).
  • Specification -- Jaw width: 125mm(5"), Opening:125mm(5"), Throat Depth:67mm(2-5/8").
  • Applicable Scene -- This 5" heavy-duty professional bench vise is suitable for use in the workshop, great for woodworkers, fitters, etc., and this bench vise can hold wood, aluminum alloy, steel, plastic and other materials.
  • Easy Using -- There are straight scale and round scale on our ductile iron bench vise body for more precise positioning works, easy mounting on the bench with 360-degree swivel base.
  • Customer Service -- We are committed to providing customers with satisfactory products and services. If you have any questions about the products, please contact us, and we will reply to you as soon as possible.
Check Stock