Reviews Dual Voltage Power Supply

Juried Engineering LM393P LM393 IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 10)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Voltage Measurement Module, DVB01 Voltage Comparator for Voltage Measurement for Control Applications

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

Comparator Dual177;18V/36V 8-Pin SO N T/R

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Mini Tattoo Power Supply Set,New Star Tattoo Mini Motor Black Tattoo Machine Power Supply with Tattoo Clip Cord and Stainless Steel Foot Pedal for Permanent Makeup Tattoo Supply Accessory

  • 1.HIQH QUALITY:Tattoo min power supply is made by aluminum alloy,smooth and light body,beautiful appearance and excellent workmanship,tattoo foot....
  • 2.EASY USE:Tattoo foot switch and tattoo clip cord are easily connect tattoo power supply.Easy installation,tattoo power supply set works for all....
  • 3.ADJUSTABLE VOLTAGE:Standard voltage setting,accurate voltage regulation.Voltage below 18V can be adjusted freely. Fully-adjustable output with dual....
  • 4.PORTABLE:Tattoo machine kit is portable and light-weight,it's easy and convenient to carry for anywhere operation.The power supply can endure....
  • 5.PACKAGE INCLUDES:Tattoo power supply set including 1 piece new generation of mini tattoo power supply,1 piece tattoo clip cord,1 piece mini tattoo....
Check Stock

Texas Instruments LM358P Low Power Dual OP Amplifier, General Purpose, 8-Pin, -16-32 Volt, 9.81 mm L x 6.35 mm W x 4.57 mm H (Pack of 15)

  • Four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Wide Supply Ranges Single Supply: 2 V to 36 V, Dual Supplies: ±1 V to ±18 V, Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage: ±36 V, Low Input Offset Current: 3 nA (Typical).
  • Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typical), Low Output Saturation Voltage, Common-Mode Input Voltage Range Includes Ground.
  • Low Input Bias Current: 25 nA (Typical), Low Input Offset Voltage: 2 mV (Typical), Low Output Saturation Voltage.
  • Example Applications: Industrial, Automotive: Infotainment and Clusters, Body Control Modules, Power Supervision, Oscillators, Peak Detectors, Logic, Voltage Translation.
Check Stock

Texas Instruments LM311P LM311 Differential Comparator With Strobes DIP8 5 Pack

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Juried Engineering LM2903P LM2903 Dual Differential Comparator Automotive Grade Breadboard-Friendly IC DIP-8 (1 Piece)

  • The LM2903P devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.
  • Single-supply or dual supplies Wide range of supply voltage Maximum rating: 2 V to 36 V.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Output compatible with TTL, MOS, and CMOS.
  • Common-mode input voltage range Includes Ground, Low output saturation voltage.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V.
Check Stock

20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module

  • How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
  • AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
  • Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
  • Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
  • Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
  • Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
Check Stock

B&K Precision 878B Dual Display Handheld Universal LCR Meter

  • Converts AC to DC: features AC to DC power supply Variable linear/ regulated design. Provides convenient and reliable AC-to-DC Power conversion W/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, ham radio, etc.
  • Usb and Screw-Type terminals: This workbench linear variable power supply features dual USB charge port and universal screw connection terminals compatible w/ a wide range of device/equipment. Used to test device/equipment operation and performance.
  • Plug-in operation: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source.
  • Short-circuit protection: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. Has rugged and durable housing construction safe for benchtop or desktop Placement.
  • Amp gauge and volt meter display: this DC bench power supply is equipped with rotary control for the adjustable powe....
Check Stock

Tattoo Power Supply - Combofix Digital LCD Design Tattoo Power Supply Multifunctional Tattoo Machine Power Supply Kit for Tattoo Machine Permanent Makeup Foot Pedal Tattoo Supplies Tattoo Kit

  • ... lightweight and weighs only 290g. Palm-sized, it's small enough even to fit inside your pocket, easy to store and easy to clean..
  • HIGH QUALITY - Made of premium plastic material, smooth and light body, beautiful appearance and excellent workmanship. The tattoo power cord is made of soft silicone, ,long-term working voltage is stable and will not hot. Performance is extremely stable, the first choice of professional tattooists..
  • ADJUSTABLE VOLTAGE - Standard voltage setting, accurate voltage regulation. Voltage below 18V can be adjusted freely. Fully-adjustable output with dual precision power dials. Suit for all kinds of rotary and coil tattoo machine gun and tattoo foot pedal..
  • EASY TO USE - Two foot pedal modes - maintained or momentary, easy Control. The power supply can endure long-time work without burning hot.The digital ultra clear LCD screen makes this power supply much easier to read as well as making it a much more accurate reading..
  • SATISFACTION GUARANTEED - We can offer the excellent product to our customers to help them achieve perfect results.If for any reason you are not fully satisfied about the tattoo power supply，just simply return it for a full refund or exchange..
Check Stock

Juried Engineering LM393P IC Dual Differential Comparator & 8-Pin DIP Sockets with Machined Contact Pins Breadboard-Friendly (Pack of 1)

  • Wide range of supply voltage Maximum rating: 2 V to 36 V, Low input bias current, Low output saturation voltage.
  • Low supply-current independent of supply voltage: 200 µA per comparator, Low input offset voltage.
  • Common-mode input voltage range Includes Ground, Output compatible with TTL, MOS, and CMOS.
  • Differential input voltage range equal to maximum-rated supply voltage: ±36 V, Example Applications: Vacuum robot, Single phase UPS, Server PSU, Cordless power tool, Wireless Infrastructure, Appliances, Building Automation, Factory automation & control, Motor drives, Infotainment & cluster.
Check Stock

Programmable DC Power Supply (0-30 V 0-10 A) HM310T High Precision 4-Digit Voltage Current Power Time Display Variable Switching Digital Power Supply with PC Software and USB Interface

  • ...programmable DC power supply has a standard USB interface on the back and supports the Modbus programming instruction set. Hardware list With programmable sequence output. Six groups of quick parameter storage features..
  • [High accuracy]: The HANMATEK variable DC regulated power supply can display the output current, voltage, and power in 4 digits. At the same time, the time can be displayed and the decimal point is automatically rounded up. Output voltage: 0-30V, output current: 10A. Voltage resolution: 10mv.
  • [Reliability and Safety]: This variable DC regulated power supply has five powerful functions: overvoltage protection (OUP), overcurrent protection (OCP), overpower protection (OPP), overheat protection (OTP), and short-circuit protection. It has a protective function. With the automatic temperature control cooling fan, the cooling fan turns on automatically when the operating temperature exceeds 45 ° C..
  • [Multi-function]: Front 5V 1.5A dual USB charging interface that can be charged and repaired. The one-key output on / off switch allows you to preset the voltage and current values ​​when the output is off, which is convenient for operation. One key for the voltage stabilization and current stabilization switch to au....
Check Stock

ATOMUS Tattoo Power Supply with Cable Transparent Acrylic Digital LED Power Supply for Tattoo Machine Pen Liner and Shader Tattoo Machine Power Supply

  • Dual-Functional Tattoo Machine Power Supply： liner and shader modes are switched mutually, just adjust (up or down) switch to complete..
  • This transparent shell is made of high-grade acrylic material, which can clearly see the internal structure of the power supply and bring you a different working experience..
  • Colorful lighting design: adjust the voltage to have a different visual feast of lighting. 0-3v blue, 3.1-5V blue-green, 5.1-7V green, 7.1-9V purple, 9.1-11V cyan, 11.1- 13V yellow, 13.1V-18V red..
  • Dual-function button design: rotating to adjust the power supply voltage,±0.1V. Press once (the light turns red), no need the foot pedal..
  • This new tattoo power supply is manufactured by ATOMUS brand manufacturer. ATOMUS focuses on the design, manufacture and sale of tattoo products, eyebrow tattoo products, makeup tools and personal care products. If you have any questions about the product, please contact us directly ..
Check Stock