Reviews Dual Electric Cooling Fans

FAERSI Fan Thermostat Temperature Switch 185 to 175 Degree Electric Engine Cooling Temperature Sensor Switch with 3/8' Pipe Thread for 10' 12' 14' 16' Fan

  • 【COMPATIBLE ENGINES】: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines.
  • 【Ease of use】185-175 degree electric fan thermostat relay switch kit for your cooling system, sending Unit Thread Size: 3/8, Spanner Size:17, Fits for any of 10, 12, 14, and 16 inch fans including dual fans.
  • 【Premium Quality】This Ac Fan Switch Radiator is anti-corrosion and very durable in using, ensure maximum strength and durability for long lasting usage..
  • 【WORKING】This kit is set up to turn your electric engine cooling fan on at 185 degrees and shut off at 175 degrees. Comes with hexagonal nut, Direct replacement part for original blower motor resistor..
  • 【NOTE】Every product must take inspected and tested multiple times before the shipment, if you get any problems with our this Electric Cooling Fan Thermostat Kit, please contact us in the first time.we can provide free replacement or refund..
Check Stock

American Volt Twin 10" Inch Electric Radiator Cooling Fans Push-in Fin Probe Thermostat Switch

  • Universal Automotive Electric Radiator Fan Kit..
  • Dual 10 inch reversible 12 volt electric cooling fans..
  • Powerful 80 watt motors will keep your engine cool..
  • Configured as air pullers out of the box..
  • Blade and wiring can be reversed to make the fans air pushers..
Check Stock

Fan Thermostat Temperature Switch 3/8' 185 Degree On 170 Degree Off Electric Cooling Engine Fan Thermostat for 10' 12' 14' 16' Fan

  • This cooling fan fan thermostat temperature switch activates your fan when the temperature reaches 185 degrees and turns off at approximately 175 degrees. Perfect fits for any of 10, 12, 14, and 16 inch fans including dual fans..
  • Compatible for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines..
  • 170-185 degree electric fan thermostat relay switch kit for your cooling system, It is a NPT 3/8" thread..
  • Electric fan switch temp switch made of high quality aluminum, anti-corrosion and durable, ensure maximum strength and durability for long lasting usage..
  • Please carefully check your vehicle model before purchase. If you have any problems with the fan thermostat temperature switch, simply contact us anytime!.
Check Stock

Fan Thermostat Temperature Switch 200 Degree on 185 Degree off Electric Cooling Engine Fan Thermostat with 3/8' Pipe Thread for 10' 12' 14' 16' Fan

  • This cooling fan fan thermostat temperature switch activates your fan when the temperature reaches 200 degrees and turns off at approximately 185 degrees. Perfect fits for any of 10, 12, 14, and 16 inch fans including dual fans..
  • Compatible for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines..
  • It is a 3/8" pipe thread. 185-200 degree electric fan thermostat relay switch kit for your cooling system..
  • Electric fan switch temp switch made of high quality aluminum, anti-corrosion and durable, ensure maximum strength and durability for long lasting usage..
  • Please carefully check your vehicle model before purchase. If you have any problems with the fan thermostat temperature switch, simply contact us anytime!.
Check Stock

Electric Fan Wiring Kit Electric Fan Relay Kit with Thermostat Radiator Fan Sensor Switch Electric Cooling Fan Thermostat Kit Temperature Sensor Switch 185 On 175 Off, 40 AMP Waterproof Relay Kit

  • Easy to follow wiring diagram simplify wiring your electric fans. RED to 12VDC positive battery terminal, COFFEE to Fan Positive, BLACK to Ignition, GREY to Sending Unit per wiring diagram. Direct replacement part fits 10, 12, 14, and 16 inch cooling fans. For dual fan wiring, you would need two of this relay kit.
  • Temperature switch turns on fan approximately at 185 Degrees and Off at 175 Degrees. The temp sensor has a 3/8 inch pipe thread, and a 1/2 inch adapter included.
  • This electric cooling fan thermostat kit comes with everything you need, includes 40A waterproof relay, wiring harness, temperature switch, 3/8 inch to 1/2 inch adapter, inline fuse holder, 20 amp fuse, 4 ring terminals and 2 fan pigtail connectors.
  • The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket if needed.
  • If you intend to mount high-profile fans, you could crimp or solder bigger wires to it. The 14AWG wires (15 amps) are not bigger enough for high amps draw.
Check Stock

American Volt Dual 12" Inch Electric Radiator Cooling Fans Fin Probe Fan Thermostat Switch Kit

  • American Volt high performance 12 inch reversible electric cooling fans.
  • Custom upgraded 90 watt motor produces more CFM air flow volume.
  • Fan motors are sealed to be water and dust resistant, increasing longevity.
  • Includes dual electric fan push-in fin thermostat probe relay wiring kit..
  • Installation instructions and wiring diagram included..
Check Stock

ZOZOMOTORS Dual Electric Fan Relay Kit Radiator Electric Fan Thermostat Kit Temperature Sensor Switch 185 On 175 Off, Automotive 40 AMP Cooling Fan Relay Switch Kit 4 Pin, Dual Electric Fan Wiring Kit

  • Easy to follow wiring diagram simplify wiring your dual electric fans. RED to 12VDC Positive Battery Terminal, COFFEE to Fan Positive, BLACK to Ignition, GREY to Sending Unit per wiring diagram. Direct replacement part fits 10, 12, 14, and 16 inch cooling fans.
  • Temperature switch turns on fan approximately at 185 Degrees and Off at 175 Degrees. The temp sensor has a 3/8 inch pipe thread, and a 1/2 inch adapter included.
  • This electric cooling fan thermostat kit comes with everything you need, includes 40A relay, wiring harness, thermostat switch, 3/8 inch to 1/2 inch adapter, inline fuse holder, 2 20amp fuse, 1 spade connector for the temp sensor, 8 ring terminals, and 4 wire connectors.
  • The thermostat supplied with this kit is OE style to mount in the cylinder head of the engine or any water jacket if needed. The thermostat MUST be grounded through the threads to the engine in order for it to work, and the engine MUST be grounded.
  • If you intend to mount high-profile fans, you could crimp or solder bigger wires to it. The 14AWG wires (15 amps) are not bigger enough for high amps draw.
Check Stock

SoundOriginal NF- 4020 Brushless DC Cooling Fan 12V 0.04~0.06A 40x40x20mm Speed 5500 RPM Fans for Computer Case Network and Storage Equipment (Routers, Switches, NAS etc Replacement) (12V 1pack)

  • Computer fans 40mm Brushless cooling fan 12vdc 0.04~0.06A 40mm x 40mm x20mm Speed 6000 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 5000 RPM, Dual-ball bearings have a lifespan of 60,000 hours and allows the fans to be laid flat or stand upright. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Connector: 2 Terminal Connector with 2pin-ph2.5.
  • compact motor design, the NF-A4x20’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x20’s superior airflow and pressure performance..
  • 40x20mm size ideal for 1U servers or replacing fans in network and storage equipment (routers, switches, NAS etc.) or other devices such as DVRs.
  • Dimensions: 40x40x20mm (1.6 x 1.6 x 0.79inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

GDSTIME 2 Pack 80mm x 25mm Dual Ball Bearings High Speed 4500RPM 12V DC Brushless Cooling Fan

  • 【Direct Replacement】as a standard size 80x80x25mm fan, it can be used to replace old broken 80 mm fans found in various electronics and machinery.
  • 【High Speed】This high rpm fan is designed to maximize airflow and suitable for noise tolerant environments.
  • Such as work shops, outdoor electric cabinets, truck, etc. max. 43.2 dBA @ 4500 RPM.
  • 【Powerful Airflow】The fan moves a lot of air.
  • you can use this fan for cooling a device or increasing ventilation or airflow at a particular place. Airflow: 59 CFM.
  • 【Dual-Ball Motors】The fan features a brushless motor.
  • precision dual-ball bearings have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.
  • 【Easy to Install】Fan size (edge to edge): 3.15 x 3.15 x 0.98 in. (80 x 80 x 25 mm).
  • Hole to Hole Distance: 2.82 x 2.82 in. (71.5 x 71.5 mm).
  • The fan can be used as both intake or exhaust fan inside your electronic enclosure or server chassis.
  • 【XH 2.54mm 2 Pin Plug】It is a 2-pin connector fan with 11.8 in. enough long power wires.
  • You can easily exchange the wires if their position is different from your old fan.
  • 【Long-lasting Cooling】Start Voltage: 3.5V.
Check Stock

Woopeey Electric Dual Fan Upgrade Wiring Harness Fit for GM 1999–2006 ECU Control Electric Cooling Fan Wire Harness Kit Replace OE # 7L5533A226T

  • 【Compatibillity】-The Electric Cooling Fan Wire Harness Kit Fit for GM 1999–2006 ECU Control..
  • 【Replace OE Part Number】-Cross Reference Part Numbers: 7L5533A226T, please check OEM part number and compatibility to ensure you purchased correct items!.
  • 【High Quality Material】-Made of durable corrosion and dust resistant material. 100% tested and meets or exceeds OEM specifications..
  • 【Function】-You can use this harness to pin your electric fan upgrade directly through the ECU and let it control the fans (ECU does need flashed). The harness is setup to control your dual fan combo and comes wired with 05+ GM truck plugs..
  • 【Package Contents】- 1 X ECU Control Dual Electric Fan Upgrade Wiring Harness Kit. Professional Installation is Highly Recommended (No Instructions Included)..
Check Stock

Fan Thermostat Temperature Switch, 195 To 210 Degree Electric Engine Cooling Fan Thermostat Temp Switch 3/8'' NPT

  • [Ease of use]: Direct replacement part for original blower motor resistor, perfect fits for any of 10, 12, 14, and 16 inch fans including dual fans.
  • [High-efficiency Fan Thermostat Temperature Switch]: Turns your electric engine cooling fan on at 200 degree and off at 195 degree.
  • [Fits most engines]: 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines.
  • [Strong & rust-free metal]: Crafted with high quality steel, come with hexagonal nut, sending Unit Thread Size: 3/8 inch.
  • [What You Get]: Yosoo fan thermostat temperature switch, Yosoo worry free guarantee and friendly customer service.
Check Stock

SoundOriginal Brushless DC Cooling Fan 24V 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances Series Repair Replacement (Black 24Vx1)

  • 1pcs Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
  • electronic cooling fans and so on—Repair Replacement (1Pack).
  • Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Air Flow : 6.9 CFM.
  • Connector: 2 Terminal Connector with 2pin-ph2.54.
  • compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance..
  • DC Brushless Cooling Fan, Rated Voltage: DC 24V, Current: 0.06A.
  • Dimensions: 40x40x10mm (1.6 x 1.6 x 0.36inch). per fan | Total Airflow: 6.9 CFM | Total Noise: 34.5 dBA | Bearings: Dual Ball.
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock