Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC
- 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
- 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
- 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
- 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
- control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
- 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check StockIngcool 4G / 3G / GNSS HAT Board for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano Based on SIM7600A-H 4G Support 4G Connection,LTE CAT4 for Downlink Data Transfer,
- Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,Onboard USB interface, to test AT Commands, get GPS positioning data, and so on,Onboard CP2102 USB to UART converter, for serial debugging.
- Breakout UART control pins, to connect with host boards like Arduino/STM32,SIM card slot, supports 1.8V/3V SIM card.
- This Product mainly applicable in North America (US, CA, MX). Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.
- Onboard audio jack and audio decoder for making telephone call,Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper,2x LED indicators, easy to monitor the working status.
- Supports SIM application toolkit: SAT Class 3, USAT,Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check StockCyberData 011233 SIP Paging Adapter
- Compatible with most analog amplifiers in the market.
- HTTP Command Interface and DTMF pass-through.
- 10 channel prioritized Multicast ports and Unbalanced Line-Out.
Check StockCorded Telephone, Home Hotel Wired Corded Desktop Phone Caller ID Office Landline Fixed Telephones with English Display DTMF/FSK Support (White)
- [DTMF/FAK System] The DTMF/FSK Systems supports both DTMF and FSK systems, which make this desktop corded telephone suitable for different situations..
- [One-key Redial Support] The landline telephone support one-key redial to the last set of dial-out numbers, press the one-touch dial to automatically dial out..
- [Flash Function] The flash function allows you to dial new phone number while you are about to hang up the present ones without putting the handle down..
- [Please NOTE] The telephone comes without manual, please know this before buying. The corded telephone is powered by the telephoneline and it.
- [Caller ID] The caller ID let you know who's calling at a glance, and there are real-time date and week display..
Check Stockwaveshare 4G/3G/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano,Based on SIM7600A-H,4G Communication GNSS Positioning,LTE-FDD B2/B4/B12 Brand Support LTE CAT4 up to 150Mbps
- The SIM7600A-H 4G HAT (Based on SIM7600A-H) is a 4G communication and GNSS positioning module, Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B) and Jetson Nano. LTE-FDD B2/B4/B12 Brand,supports LTE CAT4 up to 150Mbps for downlink data transfer.This module is mainly applicable in North America (US,CA).
- You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
- Onboard USB interface, to test AT Commands, get GPS positioning data,etc.Onboard CP2102 USB to UART converter, for serial debugging.Onboard audio jack and audio decoder for making telephone call.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
- Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports SIM application toolkit: SAT Class 3, USAT..
Check StockC019 Telephone Phone Line Network Cable Tester Butt Test Tester Lineman Tool Cable Set with Connectors and Joiner
- telephone cable tester with On/Off and hangup buttons.FSK/DTMF dual system Caller ID..
- telephone wire cable testing FSK/DTMF dual system Caller ID..
- Easy for the lineman to check your telephone line fault..
- Come with Three type of line plug,easily connect to the phone line..
- This set offers Last number redial, On/Off and hangup buttons, so the lineman can check your telephone line fault..
Check StockTYT TH-7800 Mobile Transceivers 50W Dual Band VHF UHF 800CH Mobile Radio
- 1. TYT Mobile Transceiver Series, ONE YEAR U.S Based Warranty, Warehouse (Domestic Return) in CA State--No Further Return Issue..
- 2. Cross Band Reapeater, Solid Receive Audio&Good Signal Reports, High Volume Clear.
- Morn Than 800CH. This product has been certified Part 15B and Part 97. FCC ID: PODTH-9800.
- 4. Output Power: 50/20/10/5W(VHF), 35/20/10/5W(UHF), 50 CTCSS tones/1024 DCS codes, DTMF/2 Tone/5 Tone.
- 5. Kit Includes: TYT TH-7800 Radio unit, Keypad DTMF microphone, Radio body mounting bracket, DC power cable with fuse holder,Front controller separation cable, Front controller mounting bracket, Screw packs & Protection fuses, User manual.
Check StockTYT TH-7900 50W Dual Band Mobile Ham Radio Amateur Transceiver VHF UHF 144-148/420-450MHz Car Vehicle with Cable
- → TYT TH-7900 mobile radio is a dedicated e-commerce version of TH-7800..
- → Frequency Range: Dual band: 144-148 & 420-450MHz. High power output: 50W VHF, 40W UHF..
- → Programming: TYT TH-7900 easy to programing, support CHIRP, Keypad DTMF microphone, PC driver and software. Please read the user manual, or watch....
- → Features: Detachable front controller and remote mounting capability / 800 memory channels / 50 CTCSS and 104 DCS / V+U full duplex operation /....
- → Package includes: TH-7900 Radio, Keypad DTMF microphone, USB programing cable, Radio body mounting bracket, DC power cable with fuse holder, Front....
Check StockQYT Programming Cable for KT-8900/KT-8900D/KT-980 Plus/KT-8900R Two Way Radio
- Frequency Range: Frequency: VHF UHF 2m 70cm.
- Output Power: 20Watt, Narrow/Wide Band Selectable. ( FCC ID: 2AV62KT-8900 ).
- Mini Size: Smaller size but stronger power. Size: 3.86(W)×1.38(H)×4.65(D) inch, Lightweight: about 0.9lb(main radio).Operating Voltage: 13.8V DC..
- Many Functions:Output power can be switched: 20W / 10W / 5W , And broadband or narrowband switching. FM radio function, PTT-ID, DTMF, Patrol / Monitor, Remote Stun, Remote Activate, Remote Kill..
- Cost Effective:With different back light colors, Dual-display, Dual-standby..
- Package Include:Mobile Transceiver, Microphone with DTMF Keypad, 2.8 ft DC Cable with Cigarette Plug Connector, Mounting Bracket(Fuse and Screws included) and User Guide..
Check StockBTECH Mobile UV-50X3 50 Watt Tri-Band Radio: VHF, 1.25M, UHF, Amateur and Commercial Radio
- 13.8V (15 Amp) Operating Voltage Source Required - Dual Receiver Radio (Dual RF), Capable of Crossband Repeating. DTMF, CTCSS, and DCS Calling Modes Supported.
- High (50W), Mid (20W), Low (5W) Power. VHF and UHF Output exceeds 50 watts. 1.25M is 5 watts..
- Recommended Accessories: Pair UV-50X3 with the Nagoya TB-320A Antenna (and RB-50 Mount) for easy installation. The PC05 FTDI Cable is recommended for easy computer programming - Uses CHIRP Software.
- For Dual Band Operation - The Nagoya UT-72 is recommended for vehicle use, several base antenna options exist for home/base use..
- Kit Includes: UV-50X3 Main Frame, Front Panel, DTMF Microphone, Suction Cup, 10' DC Cable, 15' Panel Cable, Bracket, Fan Kit, Manual.
Check StockDiesel Soundboard
- Factory installed DCC sound decoder for GP40 realism, sounds include.
- a choice of 5 prime movers, 16 acorns, multiple variations of 7 Bell types, 2 air compressors, and 3 couplers plus a function-activated grade-crossing signal.
- Dcc sound-equipped with econami decoder, Dual-mode NMRA-compliant decoder, directional dimming headlights, with rule 17 dimming.
- Precision motor, flywheel, die-cast frame, fine-scale handrails, E-Z Mate Mark II couplers, front and rear.
- Preforms best on 11.25” radius curves of greater..
Check StockHYS UHF VHF 10miles Long Range 2Meter 70cm Mobile Radio Ham Transceiver Built-in12000mAh Battery with Tri Band Telescopic Antenna for Travelling and Hiking Gold
- Full Dual Band VHF/UHF Mobile Radio Transceiver! Dual PTT function:Dual Push-To-Talk (PTT) speaker mic..
- Features CTCSS, DCS, ANI, DTMF, 2-Tone/5-Tone, Alphanumeric Display, 199 channels & more..
- Transmits on VHF and UHF (AM mode selectable on VHF receive freqs for AirBand recption).
- Portable Mobile Transceiver. Built-in 12000mAh Battery, You just need to charge it for 6 hours and it will continuously work for over 4 hours or....
- Package includes:1* TC-G25W Mobile Transceiver (with battery 12000 Mah )+1* DTMF Microphone+1*12.6V Adaptor+1*Power line+1* USER Manual+1* HYS-R2S....
Check Stock6 Pin Plug DTMF Handheld Speaker Microphone MH-48A6J Compatible with Yaesu FT-7800R FT-8800R FT-8900R FT-7900R FT-7100M1
- MH-48A6J Handheld Speaker DTMF Microphone – Color: Black.
- Cable Length (Not Stretch): 40cm/15.75in.
- Fit For FT-7800R, FT-8800, FT-2800M, FT-7100M, FT-7900R, FT-8800R, FT-8900R FT-1900R, FT-2900R, FT-1802M..
- Modular 6-pin plug with easy clip at the back. Push-To-Talk button and microphone are located on the accessory for quick and easy use..
- Features RJ11 6 pin plug, it enables you to talk and listen without having to remove the radio from your belt. Produces excellent transmitted audio clarity, as well as a powerful speaker..
Check Stock