Reviews Dstar Reflectors

Bewinner Assembled MMDVM Hotspot - Support DMR, DSTAR, P25 and System Combination Communications - Organic LED Display Screen,SMA Detachable Antenna,Support 420-450MHz UHF (Black)

  • This USB-stick facillitates the use of a PC to communicate on Dstar and DMR..
  • Just install BlueDV, and use the PC-microphone and PC-speakers to communicate to reflectors/talkgroups..
  • Ideal solution to use on a laptop whilst traveling..
  • The DVstick 30 is the perfect combination of the AMBE-3000 vocoder and USB interface..
  • Using BlueDV and the DVstick 30 you can make a QSO without a radio. All you need is a Windows PC with a sound card, microphone, speaker, and a DVMEGA DVstick 30..
Check Stock

AURSINC MMDVM Hotspot USB HAT Board for Simplex & Dual Band Hotspot & Modem RPT Hat Support DMR DSTAR BlueDV | Compatible with Windows Linux Android System | BER, DMR, TX & TCXO offset | MicroUSB Port

  • Compatible with Raspberary Pi: Connect MMDVM hotspot USB hat to raspberry pi usb port and run pistar, select modem-USB to setup.
  • Wide Compatibility: AURSINC Hotspot radio board supports mmdvm_hs hat,mmdvm_hs dual hat and mmdvm modem rpt hat(oled display is not compatible for now).
  • Support Bluedv: USB Hat board supports bluedv windows, bluedv-android, bluedv-ios, bluedv-linux DSTAR | DSTAR,DMR,Fusion(YSF, FCS)(only DN mode).
  • Muliti Functions: MMDVM Board supports mmdvmhost/mmdvmcal on linux/windows to test the mmdvm hat BER/DMR/TX check TCXO offset | BER XX%.
  • MMDVM_HS Firmware: The mmdvm-hs hat supports the updated mmdvm_hs firmware running: linux: sudo stm32flash -v -w xxx.bin /dev/ttyAMA0 | windows: sudo stm32flash -v -w xxx.bin /dev/comx | com serial driver is ch340x.
Check Stock

Maitys 6 PCS Bike Front and Rear Reflectors Kit Bicycle Light Reflectors Bike Safety Warning Reflectors Cycling Accessories for Handlebar and Night Cycling White/Red

  • Suitable size: the reflectors are suitable for most bikes.
  • The 2 rectangle reflectors measure approx. 1.38 inch/ 3.5 cm in width and 2.09 inch/ 5.3 cm in width, the diameter of the strap ring is about 2.09 inch/ 5.3 cm, you can measure the size of your bike seat bar and handlebar to ensure whether it fits before purchasing.
  • Abundant reflector kit: the front and rear reflectors kit includes 2 pieces of front reflectors in red and white, 4 pieces of bicycle wheel spoke reflectors, which are abundant enough to satisfy your using demands in during night riding.
  • Reliable quality: the bicycle wheel spoke reflectors and the handle bar reflectors are all made of quality plastic, durable and water resistant, which can keep in good condition after a long time use.
  • What’s more, it is easy for you to clean the reflectors due to the smooth material, not occupying too much time.
  • Convenient installment: to install the bike safety warning reflector for the handle bar, you need to get a screwdriver, loosening the nut from the screw and fixing the reflectors where you want, on the handle bar or under the saddle holder.
  • The white spoke wheel reflectors can be installed easier since no tools are required.
  • Enjoy night cycling: the front reflectors set can make your bi....
Check Stock

HESTYA 4 Pieces Bike Front and Rear Reflectors for Handlebar and Seatpost Bicycle Reflectors Kit Bike Safety Warning Reflectors Red and White

  • Package includes: there are 4 pieces bike front and rear reflectors, containing 2 pieces red bike rear reflectors and 2 pieces white bike front reflectors, sufficient quantity can satisfy your needs.
  • Durable material: the front rear bicycle reflectors are made up of plastic material, which are sturdy and durable, support using for a long time.
  • Riding much safer: the bike safety warning reflectors can add visibility at dark night, so your riding will be much safer at night.
  • Easy to install: the bike front and rear reflectors are easy for you to install, you just need to mount the reflectors on the handle bar or seatpost, just a few minutes can complete installation.
  • Applicable for: the bicycle reflectors kit can be applied for handlebars with 22-24 cm in diameter, please check the size carefully before purchasing.
Check Stock

Zopsc Digital Trunk Board with Expansion Board for Raspberry Pi GS68 MMDVM DMR Repeater, Support for Upgrades via for ST-Link, USB, GPIO.

  • With USB interface, can connect for Raspberry Pi and PC, built-in PL2303 model..
  • Support MMDVM mode for DMR / YSF / P25 / NXDN / DSTAR / POCSAG..
  • The Repeater and Simplex modes can be changed at any time by changing the RX / TX board sequence..
  • Support for Raspberry Pi 3B/ 3B/ Pi ZERO, compatible with for NanoPi NEO, for Orange Pi, compatible with for BlueDV (requires USB to TTL or Bluetooth model)..
  • Support for VHF / UFH, frequency range, depending on your external radio..
Check Stock

Salzmann 3M Spoke Reflectors for Bicycles | High Visibility | Made with 3M Scotchlite | 72 Pieces Silver

  • Made with 3M Scotchlite reflective material with a reflective rate of 560 cd/lux..
  • 360° reflection helps to increase your visibility at night and in low light weather conditions..
  • The reflectors are 2.7 inches long and come in a pack of 72 pieces..
  • The reflectors can be attached to the spokes without any tools and are equally as easy to remove..
  • Suitable for all standard spokes, please be aware that these spoke reflectors have not been designed for bladed spokes..
Check Stock

NEEWER Photo Studio Heavy Duty Metal Clamp Holder with 5/8 Light Stand Attachment for Reflector

  • High quality powerful spring clamp designed for holding studio reflectors.
  • It can be attached to any light stand with a standard 5/8" stud.
  • Capable of holding large reflectors thanks to its high load capacity.
  • Simple to use. Just attach the reflector to the stand via the reflector holder, perfect for positioning your reflectors..
  • The strong clip main body is made of metal, sturdy and durable. Note: The reflector is NOT included..
Check Stock

Neewer 2 PCS Photo Studio Heavy Duty Metal Clamp Holder with 5/8 Light Stand Attachment for Reflector

  • High quality powerful spring clamp is designed for holding studio reflectors.
  • It can be attached to any light stand with a standard 5/8" stud.
  • Can hold large reflectors due to its high load capacity..
  • Simple to use.Just attach the reflector to the stand via the reflector holder,perfect for positioning your reflectors..
  • The strong clip main body is made of metal, sturdy and durable.Note:The reflector is NOT included..
Check Stock

Neewer 3 Pieces Photo Studio Heavy Duty Metal Clamp Holder with 5/8-inch Tripod Light Stand Attachment for Reflector

  • Kit includes 3 Pieces heavy duty metal clamp.
  • Powerful spring clamp is designed for holding studio reflectors.
  • The clamp can be attached to any light stand with a standard 5/8-inch stud.
  • Can hold large reflectors due to its high load capacity.
  • Just attach the reflector to the stand via the reflector holder.
  • The strong clip main body is made of metal, sturdy and durable.
Check Stock

NTHREEAUTO Red Reflectors Round Motorcycle Safety Reflector Universal Compatible with Bicycle, Bike, Cars, Trailer, Trucks, Boat, ATV, Dirt Bike, Driveway

  • 【Compatibility】Multi-purpose. Small size is convenient for carrying and stock. Motorcycle side reflectors can use on different vehicles, such as trailer, bicycle, bike, trucks, cars and boat, such compatible with Honda Kawasaki, Suzuki, Yamaha, BMW motorcycles..
  • 【Safety Red Reflectors】Remind the other drivers to keep their distance. Even at night or in a dark environment, these high visibility reflective stickers stand out on the road, can noticeable and effectively make the rear vehicles notice your vehicle, which ensures driving safety..
  • 【High Reflective Effect】Motorcycle reflector made of high quality ABS plastic, anti-scratch, fade-proof and waterproof, durable and reliable, not easy to break or crack, with high reflective red lens cover, not easy to fade and has a long service life..
  • 【5 Minutes Required to Install】Come with a strong double side adhesive tape for fixing and padding reflectors, will not fall off even at low temperatures. You just need to take off your stock reflector and push the new replacement back to its place..
  • 【Buy with Confidence】You will get 1Pair red reflectors stick on. You are backed by 3-Month warranty since the order purchase date. Please feel free to contact us if you have any other problems..
Check Stock

NTHREEAUTO Red Reflectors Motorcycle Safety Reflector Reflective Sticker Universal Compatible with Bicycle, Bike, Trailer, Cars, Trucks, Boat, ATV, Dirt Bike, Driveway

  • 【Compatibility】Multi-purpose. Small size is convenient for carrying and stock. Motorcycle side reflectors can use on different vehicles, such as trailer, bicycle, bike, trucks, cars and boat, such compatible with Honda Kawasaki, Suzuki, Yamaha, BMW motorcycles..
  • 【Safety Red Reflectors】Remind the other drivers to keep their distance. Even at night or in a dark environment, these high visibility reflective stickers stand out on the road, can noticeable and effectively make the rear vehicles notice your vehicle, which ensures driving safety..
  • 【High Reflective Effect】Motorcycle reflector made of high quality ABS plastic, anti-scratch, fade-proof and waterproof, durable and reliable, not easy to break or crack, with high reflective red lens cover, not easy to fade and has a long service life..
  • 【5 Minutes Required to Install】Come with a strong double side adhesive tape for fixing and padding reflectors, will not fall off even at low temperatures. You just need to take off your stock reflector and push the new replacement back to its place..
  • 【Buy with Confidence】You will get 1Pair red reflectors stick on. You are backed by 3-Month warranty since the order purchase date. Please feel free to contact us if you have any other problems..
Check Stock

Neewer 600W 5500K Photography Umbrella Lighting Kit Photo Video Studio Continuous Lights for Portrait Shooting Daylight (Translucent/White, Black & Silver, Black & Gold Umbrellas, 3 Stands, 3 Bulbs)

  • KIT INCLUDES: (3)45W 5500K Light Bulb, (3)Single Head Lamp Holder, (2)Translucent/White Umbrella Reflectors, (2)Black & Silver Umbrella Reflectors, (2)Black & Gold Umbrella Reflectors, (2)83-inch Light Stand.
  • This kit is perfect for portrait, photography, video shooting, etc.
  • UMBRELLA REFLECTOR: Come with 3 colors of umbrellas (Translucent&White, Black&Silver,Black&Gold) with 33 inches/84 centimeters Diameter.
  • Help to diffuse and broaden the light output of any tungsten or studio flash source.
  • LED LIGHT BULB: 45W 5500K Energy-saving Daylight LED bulb light generates a close match to natural daylight, providing you a natural and vivid shooting effect.
  • long lifespan with excellent heat dissipation.
  • SINGLE HEAD LAMP HOLDER: A bulb light can be installed firmly on the holder to provide appropriate lighting.
  • Adjustable angle to control your light bulb.
  • LIGHT STAND: Optional light stands (Maximum 83 inches Light Stand and Maximum 33 inches Mini Light Stand) with different adjustable height.
  • Buckle design for easier height adjustment.
  • Suitable for most light, umbrella and ref....
Check Stock

MMDVM Hotspot Board + Aluminium Case Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (Raspberry Pi NOT Included)

  • Save electricity, High quality TCXO, stable, low BER. Note: This is NOT a completed or assembled Hotspot, it is just MMDVM Board with Aluminum case..
  • Support Raspberry Pi 3B, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Support VHF/UHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG.
  • Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
Check Stock