Reviews Dropout Regulator

HiLetgo MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module IIC/SPI for Arduino GY-9250

  • Power supply: 3-5V (internal low dropout regulator).
  • Communication: standard IIC communication protocol.
  • Built-in 16bit AD converter, 16-bit data output.
  • Using Immersion Gold PCB, machine welding process to ensure quality.
Check Stock

AURSINC WiFi Deauther DSTIKE Mini ESP8266 Development Board with 1.3inch OLED Display

  • Latest Software: installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz only..
  • Password:deauther ； https:// github. com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset..
  • Power Saving and Safe: Low Voltage Low-Dropout Regulator, Short Protection, Over-Charging Protection, Over-Temperature Protection..
  • NOTE: Use it only for testing and educational purposes against your own devices! Any questions or problems, please feel free to contact us..
Check Stock

Teyleten Robot GY-521 MPU-6050 MPU6050 3-Axis Accelerometer Gyroscope Sensor Module 6-axis Accelerometer Gyroscope Sensor Module IIC I2C 3-5V for Arduino 4pcs

  • Power supply :3-5v (internal low dropout regulator).
  • Communication modes: standard IIC communications protocol.
  • Chip built-in 16bit AD converter, 16-bit data output.
  • Gyroscopes range: +/- 250 500 1000 2000 degree/sec.
  • Acceleration range: ±2 ±4 ±8 ±16g,Pin pitch 2.54mm.
Check Stock

ZYAMY GY-521 MPU-6050 Sensor Module for Arduino DIY Kit 3 Axis Analog Gyroscope Sensors + 3 Axis Accelerometer 6DOF Module with Pins 3-5V DC MPU6050

  • Name: GY-521 MPU-6050 Module (3 Axis Analog Gyroscope + 3 Axis Accelerometer).
  • Chip: MPU-6050, chip built-in 16bit AD converter, 16-bit data output.
  • Power Supply:3-5v (internal low dropout regulator).
  • Communication: standard IIC communication agreement.
  • Gyroscope Range: +/- 250 500 1000 2000 ¡ã/s.
  • Acceleration Range: +/-2 +/-4 +/-8 +/-16 g..
Check Stock

High Voltage DC-DC Boost Converter 8V-32V to 45V-390V Adjustable ZVS Capacitor Charging Power Supply Module

  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input.
  • Output voltage: 45-390V continuously adjustable (the default output 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes).
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current).
Check Stock

ACEIRMC MPU9250 299DOF 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Compass Magnetic Field Sensor Module IIC/SPI for Arduino GY-9250

  • Power supply: 3-5V (internal low dropout regulator).
  • Communication: standard IIC communication protocol.
  • Using Immersion Gold PCB, machine welding process to ensure quality.
  • Used in UAV and toys , 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Compass magnetic field sensor Module IIC/SPI.
Check Stock

ACEIRMC 3pcs MPU9250 299DOF 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Compass Magnetic Field Sensor Module IIC/SPI for Arduino GY-9250

  • Power supply: 3-5V (internal low dropout regulator).
  • Communication: standard IIC communication protocol.
  • Using Immersion Gold PCB, machine welding process to ensure quality.
  • Used in UAV and toys , 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor 9-Axis Attitude +Gyro+Accelerator+Compass magnetic field sensor Module IIC/SPI.
Check Stock

AEDIKO 2pcs MPU6050 MPU-6050 GY-521 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

  • Power Supply :3-5v (Internal Low Dropout Regulator)..
  • Communication Modes: Standard IIC Communications Protocol..
  • Chip Built-in 16bit AD Converter, 16-bit Data Output..
  • The Sensor Can Be Used to Develop Various Entertaining Applications and Systems. Ideal for Projects with Gaming and Virtual Reality Devices, GPS....
Check Stock

AEDIKO 2pcs MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor IIC/SPI 9-Axis Attitude +Gyro+Accelerator+Magnetometer Sensor Module

  • Power Supply: 3-5V (Internal Low Dropout Regulator).
  • Communication: Standard IIC Communication Protocol.
  • Built-In 16Bit AD Converter, 16-Bit Data Output.
  • 9-Axis Motion Tracking: 3-Axis Gyroscope, 3-Axis Accelerometer, 3-Axis Magnetometer and a Digital Motion Processor (DMP).
  • MPU9250 Module Includes Pull-Up Resistors On the SDA, SCL, and NCS Lines.
  • Pull-Down Resistors On the FSYNC and AD0 Lines.
  • MPU9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor Using Immersion Gold PCB, Machine Welding Process to Ensure Quality.
Check Stock

MELIFE 4pcs GY-521 MPU-6050 MPU6050 3 Axis 6 DOF Accelerometer Gyroscope 16 Bit AD Converter Data Output IIC I2C Sensor Module for Arduino

  • MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor£¬Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator....
  • Chip built-in 16bit AD converter, 16-bit data output ,Supports the I2C serial interface and has a separate VLOGIC reference pin..
  • User-programmable gyroscope, with a full-scale range of ¡À250, ¡À500, ¡À1000, and ¡À2000¡ã/sec (dps) and a user-programmable..
  • Acceleration Range: ¡À2 ¡À4 ¡À8 ¡À16g.
  • Power Supply: 3-5v (internal low dropout regulator). PCB size: 1.65 x 2.0 cm Note: Operation using....
Check Stock

2 Pieces MPU-9250 GY-9250 9-Axis 9 DOF 16 Bit Gyroscope Acceleration Magnetic Sensor I2C SPI 3-Axis Gyroscope Accelerometer Magnetometer Sensor Module

  • Basic information: module model: GY-9250.
  • Power supply: 3-5V (internal low dropout voltage regulator).
  • Communication: standard IIC communication protocol.
  • Internal structure: this module uses the MPU-9250, and combines a 3-axis gyroscope, a 3-axis accelerometer and a 3-axis magnetometer which are integrated into a single QFN package.
  • Reliable chip: the MPU-9250 integrates a 3-axis magnetometer AK8963, which features smaller size compared to previous generation and sensitivity improvement with 0.15 μT/ LSB.
  • The 16-bit AD converter is embedded in the chip, with 16-bit data output.
  • Quality process: the 9-axis sensor module features the immersion gold PCB, which uses the machine welding process to make it work fine.
  • Applications: DTV and set-top boxes are applied to internet connection.
  • Wearable sensors are applied to fitness equipment and sports.
Check Stock

Chanzon 70pcs AMS1117 SOT-223 Kit Including 7 Values (1.2V 1.5V 1.8V 2.5V 3.3V 5V) Low Dropout Voltage Regulator SMD Transistor Each 10pcs

  • ✅ Overview: smd ams1117 Low Dropout Voltage Regulators LDO Kit Total 70 pcs pack for DIY.
  • ✅ ALL IN ONE: AMS 1117 SOT223 7 Values 1.2 V/1.5 V/1.8 V/2.5 V/3.3 V/5 V.
  • ✅ MONEY SAVING: We offer you a Great Value transistor assortment kit of 70 Power Regulator Transistors at the most competitive price..
  • ✅ INVEST IN A HIGH-QUALITY TRANSISTOR SET: Made of top standard materials, our transitor have the high dielectric strength, fast switching speed, large power dissipation and good current performance you need..
  • ✅ NEAT ORDER: You will receive our complete original transistores assorted in a sturdy plastic bag with compartments for different parts, which facilitates transportation and can be reused many times..
Check Stock

MakerFocus ESP8266 Development Board DSTIKE W i F i Deauther Mini with 1.3inch OLED Display V2.0.5 Software Onboard and 2dB Antenna, Protecting Short, Over-Charging, Over-discharging and Temperature

  • it installs the latest ESP8266 Deauther software. Using this software, you can perform different attacks to test WiFi networks. Please note that ESP8266 only supports 2.4GHz. For more detailed information about the software, please visit the product operation link guide below the product.
  • Product use link, password reset link, lost password, get it from the product description.
  • ESP8266 development board: You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
  • LM39100 Low Voltage Low-Dropout Regulator.
  • TP4056+PL5353A battery protection solution.
  • Protection: short, over charging, over discharging, temperature.
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation.
Check Stock