36 Vinyl Fence Gate Drop Rod BLACK -AKA Gate Drop Pin Cane Bolt-Drop Rods for Securing One of the Double Gates to the ground so the Other can be Latched to it -Powder Coated Gate Hardware
- Black Powder Coating Hardware Looks Good and Increases Vinyl Gate Drop Rod Life w/Screws..
- 36" Long Gate Drop Rod - AKA Gate Drop Pin, Cane Bolt. With Angled Brackets for Securing to Gate..
- Simple to Install Gate Drop Rod With Easy to Follow Gate Drop Rod Installation Instructions..
- Vinyl Fence Gate Drop Rod is BLACK in Color Providing a Good Look for Fence Gate Options..
- Heavy Duty 5/8" Diameter Drop Rod, Drop Pin, Cane Bolt is Strong for uses with most Double Gates.
Check StockRural365 Farm Gate Anchor Cane Bolt 18in - Farming Livestock Spring-Loaded Fence Gate Drop Rod Cattle Gate for Tube Gate
- [Keep Your Cattle Secure]: The Rural365 Livestock Gate Anchor is designed to prevent your livestock from escaping as well as support your round tube....
- [Built to Last]: Fence gate anchor rod holder constructed of stainless steel.
- Gate drop rod will stand firm in rain, sleet, and snow to hold your gate....
- [Easy to Install]: To install tube gate stop, place U-shaped attachments along the bottom of your gate, then screw on red base.
- [Easy to Use]: Drop pin rod features wedged tip to break into the ground.
- Lift curved handle to raise drop pin so you can move your gate.
- [Package Contents]: Cane bolt tube gate stop package includes 2 U-shaped attachments, 1 red base, 1 attached spring, 2 screws.
Check StockFit-Right 4'H Adjustable Chain Link Gate Kit - Galvanized
- ANTI-SAG CHAIN LINK GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to replace an existing old gate or build a new gate up to 72" wide. Use for chain link fence..
- EASY TO INSTALL - The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time. Build a gate up to 72in. Wide x 4ft. high..
- COMPLETE GATE KIT - Includes everything you'll need to build a chain link walk through gate. Steel gate frame, galvanized chan link, lockable latch, gate hinges, steel wire ties. (posts and post hinges not included).
- DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
- ADJUSTABLE - Telescoping bars fit gate openings from 24" wide up to 72" wide. Perfect for odd sized openings..
Check StockFit-Right™ Chain Link Fence Walk-through Gate Kit (24'-72' wide x 6' high)
- ANTI-SAG CHAIN LINK GATE KIT - This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging. Use it to replace an existing old gate or build a new gate up to 72" wide. Use for chain link fence..
- EASY TO INSTALL - The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time. Build a gate up to 72in. Wide x 6ft. high..
- COMPLETE GATE KIT - Includes everything you'll need to build a chain link walk through gate. Steel gate frame, galvanized chan link, lockable latch, gate hinges, steel wire ties. (posts and post hinges not included).
- DRIVE-THROUGH DOUBLE GATE - Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide..
- ADJUSTABLE - Telescoping bars fit gate openings from 24" wide up to 72" wide. Perfect for odd sized openings..
Check StockAuto Pool Latch 1-3/8\ X 2-1/2\ for Pool Chain Link Fence Gate
- Galvanized Double Gate Strong Arm Residential (1-3/8" Gate Frames)For Chain link fence gates.
- For 1-3/8" Double Chain link Fence Gate Frames.
- Strong Arm Gate Latch is Designed for 2-4 Inch Spacing Between Gates.
- Double Gate Latch Installs Easily on Two 1-3/8" Chain Link Gate Frames.
- In Most Cases No Drop Rod/Pin Required on Chain Link Fence Double Gates.
Check StockFit-Right Adjustable Chain Link Gate Kit | Square Corner Frame | 4' High-Expands from 24” to 72” Wide | Black
- CUSTOM SOLUTION: Fit-Right Frame Adjustable Walk Gate Kit fits openings of 24" to 72" wide is ideal for when you need a custom solution for a special sized gate opening.
- ANTI-SAG CHAIN LINK GATE KIT: This gate hardware kit has a patented truss cable system that keeps your gate from sagging or dragging.
- EASY TO INSTALL: The Adjust-A-Gate chain link gate kit is installed on-site to perfectly fit your gate opening every time.
- COMPLETE GATE KIT: Includes everything you'll need to build a chain link walk through gate. Steel gate frame, powder coated chan link, lockable latch, gate hinges, steel wire ties (posts and post hinges not included).
- DRIVE-THROUGH DOUBLE GATE: Purchase 2 kits and a UL301 Drop Rod kit for building a double gate drive through up to 12' wide.
Check Stock12" Cane Bolt Heavy Duty Drop Rod Gate Stopper Hardware, Gate Ground Latch for Wooden Fences Metal Gates Doors, Gate Drop Pin for Holding Gate to The Ground, Black Finish
- ...iron gates, vinyl gate or double gates, doors, etc..
- 【Keep Gates Secure】 Our cane bolt is designed to secure your single or double doors in the open or closed position. Protect your gates from moving around in the wind and the hazards that movement can present. 12 Inch drop rod is enough to steadily hold the heavy duty gate in place..
- 【Convenient Use】 Just rotate the rod outward to slide down through the holes of the brackets and insert it into the ground, to keep your gate or fence in a stable position..
- 【Easy to Install】 Comes with installation instructions and 4pcs self-drill screws(the screws are not suitable for wooden gate). Just need to drill 4 holes, then fix the 2 pcs brackets in the wooden or metal post..
Check StockWinsome Wood Harrington Drop Leaf High Table
- Harrington Drop Leaf High Table is a unique space saving kitchen table.
- Table features a drop leaf extension and is supported by gate leg.
- Perfect table for a party of two or a party of four.
- Overall dimensions when one leaf is down: 39.37 inch wx16.59 inch dx36.22 inch h.
- Constructed from solid wood in warm Walnut Finish.
Check StockKuvings NSF Commercial Slow Juicer, CS700, Slow-Rotating Motor Reduces Noise, Ultra-Efficient 200W, 60RPMs, Inc. 1 Extra-Top Set, Stainless Steel
- Maximize Nutrition: Patented, 60RPMS masticating technology will extract maximum vitamins from fruits, veggies and nuts! It decreases the extraction time and preserves flavor. Save time with a wider, 3.5” feeding chute that takes in entire ingredients..
- Durable: New stainless-steel hygienic juicing bowl fights odors, rust and discoloration. Includes 2 strainers, fine is for most recipes. Coarse is for soft ingredients cucumbers and pineapples etc. increases juicing efficiency for a higher pulp yield..
- Peaceful Performance: With its heavy-duty built-in motor, our commercial juicer offers 24-hour continual performance! The slow-rotating, deceleration design means it creates less noise and vibration without ever sacrificing power or efficiency..
- Convenient: The safe flap gate lid allows you to drop whole ingredients and eliminates the need to guide the ingredients down the feed chute. The top opening of the flap gate allows putting in leafy greens and smaller items while the flip gate is locked..
- Premium Brand and NSF Certified: Complete with safety lock and cooling systems, our juicer only operates when the main components are properly assembled. As a special bonus, every order includes 1 extra top-set..
Check StockRetractable Baby Gate, Baby Gate for Stairs, Retractable Dog Gate, Baby Gate with Door 33\ Tall, Extends to 55\ Wide, Mesh Safety Pet Gate for Staircases, Indoors, Outdoors and Hallways, White
- ...alled in corridors, balconies, kitchens and other indoor and outdoor use. Includes easy-to-install components: stainless steel screws, brackets, wall spacers, and more. Baby gate must be installed between rigid surfaces such as drywall, wood or hard walls, not drywall. Such as wooden wall installation (only need to drop the hole and drop the screw to install) hard wall installation (need to install the expansion glue and then the screw).
- 【Easy Installation】There is a movable installation position at the bottom of the baby gate, and the punching position can be adjusted according to the height of the anchor line without adding spacers. Directly locate the punching position through the product to avoid inaccurate positioning of the installation sticker.The baby gates for doorways is suitable for children 6-24 months and pets 10 to 40 lbs..
Check StockStainless Steel 10-12mm Thick Glass Door Lock no Drill Anti-Theft Security Lock with Frameless Sliding Door Lock (116B)
- KEY LOCKABLE - For securing driveway and other residential or commercial gates - no need for a padlock or chains.
- NO DROpPING AND DRAGGING - The retention grooves prevent the LokkBolt drop rod from dropping and dragging while opening and closing your gate.
- INDUSTRIAL STRENGTH - tough "metal replacement" polymer mounting system and solid 316 marine-grade stainless steel drop-rod allow for a sturdy mounting system to secure your gate.
- FOR WOOD & VINYL GATES - the LokkBolt LB224BX is made for wood and vinyl gates.
- 24 INCH DROP BOLT - The LokkBolt comes in two lengths to suite different styles and sizes of gates - 18" and 24".
Check StockBlack Wrought Iron Gate Turn Latch Lock Set 6.5 Inches W Heavy Duty Rust Resistant Powder Coated Barn Door, Fence Or Gate Ring Latches with Mounting Hardware Renovators Supply Manufacturing
- DURABLE MATERIAL - This barn door gate latch is made of heavy duty industry standard wrought iron material and spindle bar is of standard mild steel. Our exclusive black baked rust resistant powder coating protects the door latch from rust..
- MEASUREMENTS - The Latchbar length = 6.5 Inches, Turn pull Drop Backplate Width = 2.5 Inches, Projection = 3 Inches, Overall Width = 4 Inches, Spindle Bar = 3 Inches. Opens = Both the direction, Left or Right!.
- PACK INCLUDES - Black Pull ring drop with flip latch strap, single pull ring, a spindle bar, two Latch bar pieces and the mounting hardware..
- EASY INSTALL - Place latch on gate, mark all screw holes, mark centre of swing drop, drill centre, insert spindle bar via central hole and connect it to both of the swing drops to function together, install latch using the given screws, and its done!.
- BUY WITH CONFIDENCE - These sturdy farmhouse gate flip latches are carefully packed to avoid any damage in the transit process. We offer you great value products for your money and a perfect way to spend wisely..
Check StockHILLMASTER 18\ Heavy Duty Cane Bolt Gate Drop Rod for Wood Fence, Steel Drop Bolts Cane Bolt Hardware for Wooden Gater and Holding Doors, Black Finish
- 【Sturdy Premium Steel】Our Black Drop Cane Bolt made of solid steel with black finish powder coated, not easy to oxidation and can last for long life in outdoor. Attaches to the gate directly frame to help prevent your gate from dragging..
- 【Practical】 The gate drop rod is designed for secure your single or double doors and gate in the open or closed position, Bolt is can be can be locked in raised/open position. ideal be used for wood gates, metal gates, iron gates or vinyl gate etc. Designed for securing s and gates..
- 【Easy to Install】Comes with installation instructions and all mounting screws for easy installation , this fence drop pin designed for vertical or horizontal applications, just need install 8pcs self-drill screws to fix the 2pcs brackets to the gate fence sides edge is ok..
- 【Dimension】Cane Bolts help to anchor a gate to the ground to give it stability and protect your gate system from moving around in the wind and the hazards that movement can present. Rod dia x L: 3/8" x 18.
Check Stock