Reviews Drilling Machines

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

ASNOMY 6PCS Large Size Forstner Drill Bit, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood

  • 【Top Quality】Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable；.
  • 【Size】Drilling diameter：1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm)..
  • 【 Sharp & Clean Holes】This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch).
  • 【Widely Applications】Can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc..
  • 【Warm Tips】Since we are all large-size Forstner Drill bit, it is best to use machines with good fixing performance for drilling operations, such as drilling machines, bench drills, vertical drilling machines and vertical electric drills, etc., if you must To operate with a hand electric drill, it is best to use it togeth....
Check Stock

LC LICTOP 2GT Aluminum Timing Belt Idler Pulley GT2 5mm Bore 6mm Width Toothless for 3D Printer Timing Belt,Pack of 10

  • ✔ Product Contain: 10 x Timing belt pulleys.
  • ✔ Product Size: Drilling diameter: 5mm/0.2", Sutible for GT2 6mm/0.24" wide timing belt..
  • ✔ Product Material: Aluminum, surface oxidation treatment, effective rust prevention, anti-corrosion.
  • ✔ Product Features: Double bearings: Use high quality motor grade bearings to ensure good machine operation..
  • ✔ Applications: Widely used in milling machines, gear forming machines, drilling machines, CNC machine tools, hobbing machines or other mechanical transmission applications..
Check Stock

Aopin Forstner Drill Bits Professional Carbide Woodworking Hole Saw, Cutting Diameter 22mm, 2Pcs (Blue, Silver)

  • Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge..
  • Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the Forstner drill center point can precise positioning without slipping, sturdy round handle..
  • Instructions: Suitable for hand-held electric drills, portable percussion drills, CNC equipment, engraving machines, bench drills, vertical drilling machines, and other woodworking milling and drilling equipment..
  • Package Content: 2 x Carbide Forstner Bits..
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

uxcell Machine Tap 1/4-32 UNEF 2B High Speed Steel Screw Thread Threading Milling Tap Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Ballscrew Nut Mount, 1 pcs DSG25H Ballscrew Nut Housing Seat Mount Bracket Holder for SFU2505 / SFU2510 Bolt Ballscrew Nut Holder

  • This ballscrew nut bracket is adopted of high quality aluminum material, sturdy and durable.
  • This ballscrew nut housing seat fits for SFU2505 / SFU2510 ball nut.
  • Wide application scope, suitable for lathes, grinding machines, milling machines, drilling machines, integrated processing machines, EDM machines, boring machines, wire cutting machines, precision measuring instruments, woodworking machines, handling mac.
  • As mechanical ballscrew parts, convenient to replace the broken one.
Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

  • Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

  • Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
  • Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

Led Holder, Reliable LightEmitting Diode Holder, Fire‑Proof Led Light For Protecting Led Light

  • Meanwhile, Such Ball Screw Nut Bracket Is Suitable For Sfu2005 / Sfu2010 Ball Nut..
  • The Ball Screw Nut Bracket Is Made Of HighQuality Aluminum Alloy Material, Which Is Durable And Securely Locked..
  • Wide Range Of Application Helps Ball Nut Bracket Suitable For Lathes, Grinders, Milling Machines, Drilling Machines, Comprehensive Processing Machines And Edm Machines..
  • Also, Such Cnc Ball Parts Can Be Fit For Boring Machines, Wire Cutting Machines, Accuracy Measuring Instruments, Woodworking Machinery, Loading And Unloading Machines And Transportation Equipment..
  • Entitled With Practical Adoptability, Screw Nut Bracket'S High Quality Can Keep Its High Performance For A Long Time..
Check Stock

Jacobs 33363 JK 130-1/2 Industrial Grade Keyless Chuck 1.0 to 13.0 Millimeter Capacity with 1/2-Inch 20 Threaded Mount

  • High Grip Torque- Self-Tightening Feature Automatically Increases The Grip In Proportion To The Increase in Torque During Drilling..
  • Wide Application- Threaded Mounts For Professional Portable Drill Machines And Taper Fit For Stationary Drilling Machines..
  • Medium Duty Design For Various Applications.
Check Stock

uxcell Machine Tap 5/16-32 UNEF 2B Class High Speed Steel Screw Thread Threading Milling Taps Tapping Tool

  • High Speed Steel Tap: The screw tap has high wear resistance, fast cutting speed, high strength and hardness, and long service life. With uncoated base substrate only, suitable for general purpose tapping..
  • Wide Applications: The thread tap is suitable for drilling mild steels, aluminum, iron, copper, stainless steel, hard plastic, processing through holes or shallow holes. Add appropriate tapping oil for higher quality internal threads and more durable taps..
  • Straight Flute Tap: Straight 3 flutes are ground to provide rapid downward chip removal for efficient threading, clear threads without burrs, right hand tapping direction. Micro taps are mainly used in clocks and watches for machining holes in wood and soft metals with low hardness..
  • Machine Taps: Used in drilling machines, tapping machines, automatic machines, machining centers, CNC, milling machines, not recommended for hand and electric drill tapping. Recommended feed speed: ordinary steel: 6-15m/min.
Check Stock

Ball Nut Bracket, Aluminum Alloy High Performance Practical Nut Bracket, Woodworking Machinery forrs Milling Machines

  • Entitled with practical adoptability, screw nut bracket's high quality can keep its high performance for a long time..
  • Wide range of application helps ball nut bracket suitable for lathes, grinders, milling machines, drilling machines, comprehensive processing machines and EDM machines..
  • Also, such CNC ball parts can be fit for boring machines, wire cutting machines, accuracy measuring instruments, woodworking machinery, loading and unloading machines and transportation equipment..
  • The ball screw nut bracket is made of high-quality aluminum alloy material, which is durable and securely locked..
  • Meanwhile, such ball screw nut bracket is suitable for SFU2005 / SFU2010 ball nut..
Check Stock