Reviews Drill Spindle

PROXXON Bench Drill Press TBM 115, 38128 , Green

  • Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy.
  • High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm)).
  • 3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds.
  • Quill diameter 1 1/4" (32mm) with return spring, throat depth (column to drill spindle) 5 1/2" (140mm).
  • Scope of delivery: 1x PROXXON Bench Drill Press TBM 115 including MICROMOT Steel Collet Set. Part number: 38128.
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

Stalwart 25 piece 4.8V Cordless Screwdriver with LED

  • ELECTRONIC SCREWDRIVER SET – This automatic screwdriver comes with 24 various screwdriver and drill bits, a convenient carrying case, and a charging cord, so you can be sure your mini drill is always charged and ready to go..
  • FORWARD AND REVERSE SWITCH – The electric screwdriver is equipped with a forward and reverse switch, great for drilling screws into walls and taking them out. With the comfortable soft grip handle, using the power screwdriver is a breeze..
  • AUTOMATIC SPINDLE LOCK – This electrical screwdriver features an automatic spindle lock that safely locks the drill bit in place, has a no-load speed of 180rpm, and comes with a LED work light on the head that makes it easier to see..
  • INCLUDED CARRYING CASE – The electrical screwdriver set comes in a convenient carrying case to keep all your tool bits protected and stored away in between uses. This case also makes it easy to take your driver with you on the go..
  • PRODUCT DETAILS – Materials: Plastic and Metal. Specifications: 4.8V. 25-Piece-Set of Screwdriver and Drill Bits with Included Carrying Case. Color: Red..
Check Stock

Shop Fox W1668 3/4-HP 13-Inch Bench-Top Drill Press/Spindle Sander

  • Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM.
  • Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums..
Check Stock

EWANYO 3-Speed Benchtop Drill Press, Electric Bench Wood Drilling Machine for DIY Creation, Small and Precise Work Like Jewelry Making Woodworking Metal Drilling Machine 110V

  • ...E】 With speed regulation function, speed regulation is convenient (I: 0-8000r/min.
  • III: 0-16000r/min) enables you to operate at a precise speed suitable for your project, which is more convenient and accurate than hand-held drilling rigs..
  • 【Drilling Parameters】Drilling diameter is 1-10mm, the spindle is about 155mm away from the drill bit center, max spindle travel is 25mm. Non-load speed is 3 level, the first is 0-8000r/Min, second is 0-11000r/Min and the last is 0-16000r/Min..
  • 【Powerful Motor】High-power 340W miniature portable bench drill precision drilling machine motor copper. Adopting imported bearings, high temperature and full copper wire processing, shell adopts nylon plastic processing. Suitable for drilling, expanding, and reaming operations on metals and other materials..
  • 【Various Material Applicable】Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.Can also be used for DIY furniture, work easily, drilling holes more accurately..
Check Stock

MYSWEETY Upgrade Version CNC 3018 Pro Engraver Machine, GRBL Control DIY Mini 3 Axis CNC Router Kit, Wood Router Engraver Pcb Milling Machine with Offline Controller + ER11 and 5mm Extension Rod

  • New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • The main two advantages of offline controller : 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • Simple Assembly: Download the English manual and software: https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1(1).rar. If you have any question, please contact us firstly, thanks!.
  • This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack..
  • Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.DescriptionDescription:.
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

SXTL 2 Pack Bow Drill Fire Starter Kit Outdoor Survival Practice Tool Friction Fire Starter for Scout ,Backpacking and Camping

  • [FIRE MADE EASY] With our carefully selected hard pine spindle and soft paulownia fire board, this bow drill fire starting kit can provide a really easy, fun and confident fire starting experience. Beginners may need a few attempts to produce an ember, while experts can start a fire in less than 30 seconds with this tool..
  • [PERFECT EDUCATIONAL TOOL] This bow drill kit is a perfect tool for teaching kids or training Boy Scouts the principles of friction fire and a great gift for them to practice their survival skills. Building a fire easily can open up the whole world of friction fire starting for the child or youngster you are trying to teach..
  • [SET UP AND READY] The handle and spindle are pre-assembled with parachute cord, the bearing is secured with the cap, and the product is ready to use the moment you open the box. It also comes with an instruction book with pictures and details that will help you start your first friction fire..
  • [DURABLE DESIGN AND MATERIAL] The spindle is capable of dozens of fires. The fireboard has ten pre-made divots and notches, and it has an additional area for you to cut more divot and notches to your style, and the ball bearing spins smoothly under heavy pressure..
  • [DON'T GIVE UP IF YOU FAIL] Creating fire through friction ....
Check Stock

scottchen PRO Spindle Sander Adaptor 4-1/2\ x 1/2\ with Rubber Sanding Drum Kit OD 3/4\

  • 【Function】This spindle sanding drum Kit is used for sanding and polishing curves, resurfacing, contouring, smoothing inner hole, and material removal etc. Especially excellent for woodworking projects..
  • 【Application】This spindle mandrel with drum Kit suitable for diameter in 3/4 inch, 1 inch, 1-1/2 inch wood project treatment. Length 4-1/2” great for thick wood board sanding..
  • 【Mandrel & Drum】This spindle sander adaptor mandrel head is 3/8” diameter, fit for most oscillating drill press. Rubber sanding drum in 3size 3/4.
Check Stock

Amazon Brand - Denali by SKIL 20V Cordless Hammer Drill Kit with (2) 2.0Ah Lithium Batteries and Charger

  • Cross-compatible with all SKIL PWRCORE 20 tools, batteries, and chargers.
  • Cordless hammer drill kit with 3-in-1 driver, standard drill, and hammer drill for power and versatility.
  • Includes a 20V hammer drill, 2 Denali by SKIL 20 2.0Ah lithium batteries, a 2.4A charger that fully charges a 2.0Ah battery in 60 minutes and a 4.0Ah battery in 100 minutes, bit, and belt clip.
  • Toggle between driver (for screws), drill (for wood, plastic, and metal), and hammer drill (for bricks and cement).
  • 1/2-inch keyless ratcheting chuck with auto spindle lock for quick, easy bit changes.
Check Stock

WEN DPA167H Heavy Duty JT33 Keyless Drill Press Chuck with 1/64 to 5/8-Inch Capacity

  • Heavy duty heat-treated drill chuck operates with less than 0.004 inches of runout (0.1 mm).
  • Holds drill bits anywhere from 1/64 to 5/8 inches in diameter.
  • Easily open and close the three chuck jaws without any tools or keys.
  • Universal design fits onto any drill press, milling machine, or CNC lathe with a JT33 spindle.
  • Compatible with WEN models 4208, 4210, 4210T and 4212 drill presses.
Check Stock

TECHTONGDA 600W Mill and Drill Brushless Motor Benchtop Drilling Milling Machine Variable Speed Mill 110V

  • ⚙Powerful function: This is a multi - functional drilling and milling machine, can complete drilling and milling operations. Also can be used for precision parts processing, sample processing and model..
  • ⚙Brushless motor: It USES a 600W brushless motor with strong power and easy maintenance..
  • ⚙All metal: It USES an integrated spindle and brass gear, which makes it not only precise but also durable..
  • ⚙Variable-Speed: Weather you need high speed or lower speed spindle operations this machine can handle it. Boasting a 50-2250 RPM spindle speed for the extreme precision your project needs..
  • ⚙Professional drill and mill: One machine for multiple purposes, iron plate, stainless steel plate, angle iron, wooden block, plank, etc. can be drilled and milled..
Check Stock