Reviews Drill Pipe Power Tongs
GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings
- 1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
- 2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
- 3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
- 4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
- 5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....
Check StockPlumbing Fitting Saver Bit Socket Saver, for 1/2\ Speed Power Drill, Pipe Reamer Tool for Removing SCH 40 from Hub, Bit Fitting Saver Inside Pipe Cutter for ABS PVC Pipe (2 Inch)
- Bit Socket Saver: made of strong quality stainless steel, it's a strong replacement steel construction, not easy to break or fade out, greatly save you pipe.
- Feature: this set is designed for removing schedule 40 plastic pipe from a hub, compatible with cutting ABS or PVC DWV pipe below slab, fits 1/2'' variable speed power drill, easily remove broken pipe from a hub.
- Practical Tool: by using this tool, you don't need to change your whole pipe, just cut the part of inside, save money on costly replacement kit, save your time and can well complete your work, practical tool for you to use.
- Easy to Use: you just need to install it on your power drill, then fits it in the pipe, get the power drill speed on, it can work perfectly and save not only your time but also your money.
- Note: please note that this tool is a replacement, please carefully learn the size before purchase, please keep away from children.
Check StockPlumbing Fitting Saver Bit Socket Saver, for 1/2\ Speed Power Drill, Pipe Reamer Tool for Removing SCH 40 from Hub, Bit Fitting Saver Inside Pipe Cutter for ABS PVC Pipe (3 Inch)
- Bit Socket Saver: made of strong quality stainless steel, it's a strong replacement steel construction, not easy to break or fade out, greatly save you pipe.
- Feature: this set is designed for removing schedule 40 plastic pipe from a hub, compatible with cutting ABS or PVC DWV pipe below slab, fits 1/2'' variable speed power drill, easily remove broken pipe from a hub.
- Practical Tool: by using this tool, you don't need to change your whole pipe, just cut the part of inside, save money on costly replacement kit, save your time and can well complete your work, practical tool for you to use.
- Easy to Use: you just need to install it on your power drill, then fits it in the pipe, get the power drill speed on, it can work perfectly and save not only your time but also your money.
- Note: please note that this tool is a replacement, please carefully learn the size before purchase, please keep away from children.
Check Stock8 Pcs Swaging Tool Drill Bit Set HVAC Repairing Set Air Conditioner Manual Copper Pipe Swage Tube Tool with Copper Pipe Cutter and Deburring Tool for Copper Aluminum and Thin Stainless Steel Tube
- 【What You Will Get】: This air conditioning copper pipe flaring tool set contains 8 tools: 6 Pcs different size drill bits, 1 Pc mini copper pipe cutter, 1 Pc deburring tool, complete set of tools, very suitable for air conditioning copper pipe flaring operation during HVAC installation, no complicated learning, easy to use..
- 【Drill size】: 6 different sizes of drill bits, including 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
- Handle diameter: 7 mm (hexagonal handle), pipe reaming tool is a necessary accessory for repairing air conditioners..
- 【Mini copper pipe cutter】: 3-28mm (1/8" - 1 1/8") copper pipe cutter can cut copper pipe, steel pipe, stainless steel pipe, aluminum pipe PVC and iron. Note: Cutting PVC pipe is not recommended because it is much more difficult to cut..
- 【Deburring Tool】: The blade is mounted on the handle can rotate 360 degrees, this tool helps to clean the top of the pipe or tube, it has a compact size and can easily be carried anywhere..
- 【Why Do You Need HVAC Tools Drill Bit Set】: When connecting copper pipes of air conditioners, the soft copper pipes are expanded by the rotation of the drill bit, so that the two copper pipes are connected without leakage. When used in combination with electric drill and impact....
Check StockDURATECH Inside Pipe Cutter with 2 Replaced Blades, for PVC and Plastic Pipe
- Comes with 2 extra replaced blades. Heat-treated steel, 1.2mm blade thickness, black coating ensures durability. Sharp saw-tooth design for faster cutting..
- Nickel-plated shaft can effectively prevent the product from corrosion. With high hardness, the tool ensures daily operation needs, and can cut up to 6mm thickness PVC pipe, plastic pipe..
- Need to connect with power drill to use, and is easy to installation. Could be a great helper in cutting out drain stubs or repairing broken pipes..
- TIPS: Before cutting in a pipe, please make sure the blade is locked tightly into the shaft. Otherwise, the inner pipe cutter may not exert its function well..
- Caution: When the cutter is connected with a drill, it could be dangerous. Be aware of the sharp edge, and always wear protection to avoid hurting..
Check StockToledo Pipe KIT HC 3092 Pipe Hole Cutter Chain Vise and Milwaukee 1660-6 1/2" Compact Drill 450 RPM
- The Toledo Pipe HC 3092 Easily attaches to various sizes of pipe and conduit..
- Making it effortless to drill up to a 4 1/2" hole into the side of pipe or conduit without slipping..
- Clamping the drill to the pipe also guarantees perfectly square, centered holes..
- Comes with Milwaukee 1660-6 1/2" compact drill..
- Max Drill Capacity: 4 1/2", Min Pipe Size: 1 1/4", Max Pipe Size: 12", Chain Length: 36".
Check StockDisconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings
- 【Package Includes】1 pcs disconnect tongs tool.
- 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
- 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
- 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
- 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check StockCTA Tools 9030 Fluted Screw Extractor Set 5-Piece
- Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
- Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
- Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
- Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
- Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stockscottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set
- 【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
- 【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
- 【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
- 【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
- 【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..
Check StockWheeler-Rex 2290 Internal Plastic Pipe Cutter 2-Inch Schedule 40 Pipe
- Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds..
- Recommended user supplied power source: 1/2-Inch capacity, 350-450 rpm drill, rated at 4.6 to 6-Amp.
Check StockWheeler-Rex 4290 Internal Plastic Pipe Cutter 4-Inch Schedule 40 pipe
- Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds.
- Recommended user supplied power source: 1/2-Inch capacity, 350-450 rpm drill, rated at 4.6 to 6-Amp.
Check StockWADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube
- Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
- Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
- Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
- Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
- Package Include: 3-28mm(1/8"-1-1/8")Tube or Pipe Cutter*1.
Check Stock1.5 Inch PVC Pipe Reamer, Plumbing Fitting Saver Bit Socket Saver Bit for Removing SCH 40 from Hub Practical Plumbing Tools for PVC Pipe Compatible with 1\\/2 Speed Power Drills
- Package Content: You will receive a socket saver for removing SCH 40 from a hub and suitable for 1/2 inch variable speed drills. It can easily cut various plastic pipes, such as ABS, PVC and DWV pipes..
- Premium Material: Our inside pipe cutter for PVC pipe is made of high quality stainless steel, sturdy enough and durable, not easy to break or bend. You can use it with confidence..
- Practical: You only need to cut the broken part of pipes with our plumbing tools. No need to replace the whole pipe, thus it can save your time and energy to repair broken pipes. Very practical..
- Easy to Use: You just need to install the socket saver on your power drills, then place it in the pipe and start to drill, lastly clean the inside of pipe and connect with new pipe connector..
- Important Tips: Please ensure the size of our product to match your power drills before ordering. Sharp pipe reamer should be away from kids to prevent accidental injuries..
Check Stock