Reviews Drill Bits For Stainless Steel Bolts

STROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

  • 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
  • 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
  • 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
  • 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
  • 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

SharCreatives 55-Piece Master Screw Extractor Drill Bit & Guide set, Broken bolt extractor set, Multi-spline Extractors & Drill Bits for Removing Stripped, Frozen, Rusted, Roundoff Bolts, Screws, Pins

  • ... Titanium Nitride coating provides higher wear resistance, ability to withstand higher temperature. This bolt extractor set makes it the ideal set for removing broken screws, bolts, studs, fittings, threaded pipes pins and more..
  • The Master set contains 16 high-speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
  • Wide range of applications: All the screw extractors are precision engineered to easily remove seized, broken studs, bolts, pipes, lugs, socket screws and fittings.
  • The aggressive left handed drill bits and extractors create extra gripping power. Easy-out style spiral flutes embed themselves to increase grip as resistance increases. Drill bit kit guide and long extractor pins for hard-to-reach and tight areas. Fit where others won't and can't..
  • 55 Pieces includes: 16 high-speed steel drill bits Size:（5/64"，7/64"，1/8"，5/32"，3/16"，7/32"，1/4"，19/64"，9/32"....
Check Stock

Topec 55-Piece Screw Extractor & Broken bolt extractors, Multi-spline Extractors, and Drill Bits for Removing Damaged, Frozen, Rusted, Rounded-Off Bolts & Screws

  • ... Made of heat-treated high-quality high-carbon steel (chromium-molybdenum steel)，is the ideal tool for removing broken screws, bolts, studs, fittings, threaded pipes and pins..
  • 【55-PIECE MULTIFUNCTIONAL SCREW & BOLT EXTRACTOR SET】- It contains 16 high speed steel drill bits, 13 multi spline extractors, 10 drill bit guide bits, 6 spiral screw extractors , 5 extractor pins, 5 nut extractors. Multiple specifications and sizes to meet your various work needs..
  • 【WIDE RANGE OF APPLICATIONS】Our screw and bolt extractor kit makes fastener extraction a breeze. the Drill Bit Guide complemented by the HSS drill bit provides the user with a clean and precise screw extraction. Damaged screws and bolts will be easily extracted..
  • 【EXACT SIZE】:16 high speed steel drill bits Size:（5/64"，7/64"，1/8"，5/32"，3/16"，7/32"，1/4"，19/64"，9/32"，5/16"，11/32"，3/8"，13/32"，7/16"，15/32"， 1/2"), 13 multi spline extractors Size：(1/8"，5/32"，3/16"，7/32"，1/4"，9/32"，5/16"，11/32"....
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

Handrails for Outdoor Steps 304 Brushed Stainless Steel Handrail Railing Handrail Stair Rail 1-4 Step Outdoor Stair Railing

  • 【 STURDY HANDRAIL】- Our handrails are made of stainless steel 304, which is very strong, safe, stable and beautiful, enough to provide balance and....
  • 【1-5 STEP HANDRAIL 】-Construct with 304 stainless steel post and grip surface.Load Weight:330LB.
  • About 59.06" Length of grip surface - on the top....
  • 【INDOOR/OUTDOOR USE】- The step handrail is with a great look, and stainless steel textures make it an eye-catcher. It is a fantastic railing for....
  • 【PERSONAL DESIGN】- Friendly Design for the old,child,disabled family member,after surgery people.
  • Very solid handrail helps with a high single step....
  • 【EASY TO INSTALL】-1,Pre-assembling the parts.
Check Stock

OXMUL Step Drill Bits for Metal, 1/8 to 1/2, Cobalt Bit, Heavy Duty for Stainless Steel,Metal, Aluminum, Wood, Copper, Wood, 13-Steps. #202

  • 【Heavy Duty for Stainless Steel】 The Cobalt Drill Bits(1.3243 STEEL) can drill 6X longer life and 2X faster. This Drill bits is heavy duty for Stainless Steel, Metal, Galvanized Steel, Aluminum,Iron, Wood, PVC and Copper. If you want to drill faster and many holes on metal, please choose this step drill bit.
  • 【Cobalt Bits】 Prefect for Stainless Steel/Metal Sheet/Wood/Plastic/Aluminum Sheet/Copper and other metal sheets. This Drill bit can successfully drill more and more holes easily into Stainless Steel plate like knife through butter!.
  • 【120-DAYS WARRANTY】 - If not satisfied, Any Reason, please contact us for 100% refund or replacement.
  • 【13 Steps︱2-Spiral-Flute︱1/4" Shank】 13-STEPS: 1/8,5/32,3/16,7/32,1/4,9/32,5/16,11/32,3/8,13/32,7/16,15/32 to 1/2 inches. 2-Spiral Flute:Clears Chips faster.
  • 【Cutting Fluid】 Cutting Fluid must be poured during work for longer life! Prohibit water-cooling to prevent!.
Check Stock

YESKING 50-Piece Bolt Extractors Screw Extractor Set, Easy Out Bolt Extractor Set Stripped Screw Remover and Drill Bits for Removing Broken Studs,Frozen,Rounded-Off Bolts

  • 【50-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 4-in-1 screw & nut remover kit and drill bit kit.It contains 13pcs multi-spline screw extractors, 16pcs left hand HSS drill bits, 6pcs spiral screw extractors,13pcs nut removers,1pcs extension bar and 1pcs ratchet wrench.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. ....
Check Stock

AKM 1/2' Hand Manual Reversible Impact Driver Set Extractor-12 PCS Impact Screwdriver S2 Steel Much More Durable Disengage Rusted Fasteners or Frozen Bolts

  • ♣Convenient 1/2 receiver allows use of any 1/2 bit tip or hex nut driver..
  • ♣Ideal for loosening or removing firmly tightened or rusted screws or bolts.Must have for motorcycle jobs or engine repair..
  • ♣Package included:1pc x Impact Screwdriver.1pc x Impact Screwdriver Adapter.2pcs x "+" Drill Bits PH3.2pcs x "+" Drill Bits PH2.2pcs x "-" Drill Bits SL8.2pcs x "-" Drill Bits SL10.1pc x Screw Extractor #3.1pc x Screw Extractor #4..
  • ♣Come with S2 High Alloy Steel impact grade bits have precision-milled tips for exact fit. The impact driver has Corrosion-Resistant Chrome plated finish and non-slip knurled grip..
  • ♣Number #3 Removes Screws 7/32" to 9/32" (Use 5/32" Drill Bit).Number #4 Removes Screws 9/32" to 3/8" & 1/8" Pipe (Use 1/4" Drill Bit).
Check Stock

Pikwo Hand Manual Reversible 1/2-inch 3/8-inch Impact Driver Set Extractor-13PCS Impact Screwdriver S2 Steel Disengage Rusted Fasteners or Frozen Bolts

  • ♣Convenient 1/2 and 3/8 receiver allows use of any 1/2 and 3/8 bit tip or hex nut driver..
  • Ideal for loosening or removing firmly tightened or rusted screws or bolts.Must have for motorcycle jobs or engine repair..
  • Package included:1pc x Impact Screwdriver.2pc x Impact Screwdriver Adapter.2pcs x "+" Drill Bits PH3.2pcs x "+" Drill Bits PH2.2pcs x "-" Drill Bits SL8.2pcs x "-" Drill Bits SL10.1pc x Screw Extractor #3.1pc x Screw Extractor #4..
  • Come with S2 High Alloy Steel impact grade bits have precision-milled tips for exact fit. The impact driver has Corrosion-Resistant Chrome plated finish and non-slip knurled grip..
  • Number #3 Removes Screws 7/32" to 9/32" (Use 5/32" Drill Bit).Number #4 Removes Screws 9/32" to 3/8" & 1/8" Pipe (Use 1/4" Drill Bit).
Check Stock

XJX Screw-Extractor Set | Easy Out Bolt Extractor Set | Multispline and Spiral Extractor Set | Perfect for Stripped Screws, Studs, Fittings, and Lugs, Left-Hand Drill Bits | 1/8" to 13/32"（25-Piece）

  • 【25-PIECE MULTIFUNCTIONAL EXTRACTORS SET】: This is a set of 3-in-1 screw & nut remover kit and drill bit kit.It contains 10pcs multi-spline screw extractors, 10pcs left hand HSS drill bits, 5pcs spiral screw extractors.Multiple specifications and sizes to meet your various work needs..
  • 【HIGH QUALITY HSS & CR-MO】: The drill bits of this extractor set are made of high speed steel. The screw and nut extractor kit is made of chrome molybdenum steel. These two excellent materials are harder and tougher and can be used for a variety of metal fasteners. The reverse spiral groove design bends downward to provide maximum grip..
  • 【HIGH CARBON STEEL DRILL BITS】: 135° angle design of the head for easier access to fasteners and improved efficiency.High speed steel, strong than cobalt bits and not easy to wear. Surface titanium nitride coating, effective anti-corrosion and anti-rust, prolong the service life..
  • 【CR-MO NUT REMOVERS】: All premium industrial grade bolt extractors are tightly designed. Grip firmly, not easy to fall off, provide more torque. Easily remove damaged bolts, nuts and screws even if they are ....
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • ... drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16, 15/32, 1/2".
Check Stock