Reviews Drill Bits For Drilling Steel

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

Milwaukee 48-89-2801 21-Piece Thunderbolt Black Oxide Drill Bit Set

  • Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come..
  • Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs..
  • Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits)..
  • Use Center Punch to Mark the Spot: Please mark the spot that you are to drill for easier drilling and improved drill bits life..
  • Keep Your Step Drill Bits Well Organized: All the bits come in a well-organized case for easy transport and storage..
Check Stock

VALYRIANTOOL 1/8″ Cobalt Drill Bits(20PCS), M35 HSSCO High Speed Steel Double Ends Stubby Body Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

  • 【20PCS 1/8″ Cobalt Drill Bits】20PCS – 1/8″(Drilling Diameter) x5/8″(Flute Length)x2″(Overall Length) Metal Drill Bits. This drill bit fits the majority of power drill currently on the market..
  • 【M35 Cobalt High Speed Steel】Industry grade M35 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ☺[15 Pcs 16mm to 3mm (5/8" to 1/8") Masonry Drill Bits, More Quantity, More Size] Masonry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
  • ☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry ....
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

AMOOLO Cobalt Drill Bit Set 31Pcs (1/16"-1/2"), M35 High Speed Steel Metal Drill Bits Jobber Length for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

  • ...gh Speed Steel】Industry grade M35 high speed steel drill bit set, much harder than HSS used in other similar drill bits set. These drill bits contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Most Commonly-Used 20 Sizes】A complete combo set of 31 jobber length industrial drill bits for metal drilling (1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64",7/32",15/64",1/4", 17/64", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2") . They fit the majority of power drill currently on the market and comes with a portable plastic case for easy storage and organization..
  • 【Precise & Efficient Drilling Performance】✔ Fully Ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. ✔ 135° Split Point with round straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】At Amoolo, we center on customer satisfaction. Get your dril....
Check Stock

2 in 1 Corded Electric Hammer Drill 800W | 110V Durable & Lightweight Rotatory Impact Power Drill | Rubber Grip With carrying plastic bag Use For Woodworking Round Whole (28 Pcs)

  • ROTATING HANDLE & DEPTH GAUGE: Its keyed chuck is suitable for drill bits with a diameter (≤13mm) to meet your requirements for different drill bits. Anti-skid auxiliary handles can rotate 360 degrees, offering greater control, precision, making drilling comfortable and convenient.
  • a Thoughtful depth gauge makes your drilling more accurate..
  • HAMMER & IMPACT POWER DRILL: K Nakasaki hammer drill has the function of combining hammer and drill, according to different tasks, the top button can be easily switched to select the hammer & drill function. Hammer function for drilling on the wall and drill function for drilling holes on steel plates and wood. This hammer drill would be your excellent helper. At the same time, it is also your best choice for gifts..
  • PRECISE SPEED CONTROL: Lock button of the impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. K Nakasaki hammer....
Check Stock

12 inch Extra Long Brad Point Drill Bit Set with 7 Total Drill Bits • Ideal for Wood • PVC • Resin • Composite • MDF and Drywall (Sheet Rock) Materials

  • Sometimes bigger is better and when it comes to drilling or boring into thick material, bigger is definitely better. Introducing the Fulton high speed steel extra long brad point drill bit set. Each bit measures around 12 inches in total length to provide you with enough drilling length to tackle most any project you can throw at them..
  • Many times when working around the house or out on the job site, we come across a situation where we need to drill through thicker material like a 6 x 6 or 4 x 4 when building things like an privacy fence or even rough building applications. These Fulton extra long brad point drill bits are perfect for these situations!.
  • Made from high speed steel, these bits are ideal for many different project types and materials. Drill into MDF, 4 x 4’s, 6 x 6’s, PVC, Resin’s, Composites, Plywood and more. Since each bit has a sharp (brad point) tip, it is recommended that you do NOT use these bits to drill into metal objects..
  • Brad Point drill bits are specifically designed for better hole location accuracy. The sharp point on the tip allows you to precisely locate your mark with the bit and with a little pressure, the bit won’t slip or walk as you initiate the drilling process. This makes brad point drill bits excellent....
Check Stock

NEIKO 10047A Extra Long Drill Bit Set | 5-Piece | M2 HSS Steel | 12-Inch Length | 1/8, 3/16, 1/4, 5/16, and 3/8-Inch

  • [LONG REACH]: Extra-long drill bits give you 12 inches of added length to work with and provides more stability during quick operations..
  • [DURABLE]: These drill bits are made from heat-treated M2 high speed steel for excellent hardness, wear resistance, and toughness..
  • [SMOOTH DRILLING]: Combining high hardness and sharp pointed tips, these drill bits easily puncture tough materials for a smooth drilling finish..
  • [VERSATILE]: Long drill bits can be used for drilling into metal, wood, plastic, PVC, and many other materials..
  • [INCLUDES]: This extra-long drill bit set has (5) standard sizes of 12-inch drill bits that includes: 1/8-inch, 3/16-inch, 1/4-inch, 5/16-inch, and 3/8-inch..
Check Stock

Ideashop 10Pcs Ultimate Drill Bits, Heavy Duty Multifunctional Drill Bits with Carbide Tip 6/8/10/12mm Punching Drill Bits Set for Hard Metal and Steel, Tile, Concrete, Glass, Brick, Wood, (Orange)

  • ...k. The pointed tips of triangular drill bits are neat, smooth, and sharp, which locate holes easily and accurately, without tremor and boundary damage..
  • 【Fast Chip Removal】Adopting spiral slot body design, which is fully polished and rust-proofed, the ultimate drill bit set provides low resistance, and makes the drilling and chip removal easier and smoother, greatly improves your work efficiency and saves time and efforts..
  • 【Anti-slip Design】Featuring triangle drill bit shank design, the multifunctional drill bits are non-slip to ensure the electric drill operate firmly, and avoids slipping during drilling, making the drilling holes exquisite and beautiful..
  • 【4 Different Sizes】10Pieces ultimate drill bits for hard metal and steel includes 3pcs 6mm(1/4"), 3pcs 8mm(5/16"), 2pcs 10mm(3/8"), 2pcs 12mm(1/2"), the 4 multi-size specifications to meet your needs. They are packed orderly in a transparent storage case, which is easy to carry and use anytime anywhere..
  • 【Widely Used】This set of ultimate drill bits is suitable for bench drills, lithium electric drills, charging drill, eletric hand drills, etc. They can be used for drilling a variety of materials, such as: stainless steel, aluminum alloy, steel, copper, brick wall, wood, plastic, ....
Check Stock

AMOOLO 3/16' Cobalt Drill Bits(10Pcs), M35 High Speed Steel Jobber Length Twist Drill Bit Set for Hardened Metal, Stainless Steel, Cast Iron, Plastic and Wood

  • 【10Pcs 3/16" Cobalt Drill Bits】10Pcs - 3/16”(Dia 4.76mm) x2-5/16”(Flute Length 58.74mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock