Reviews Double Pcb

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

SUPERNIGHT LED Strip Lights 16.4FT 5M SMD 5050 Waterproof 300LEDs RGB Color Changing Flexible LED Light Strip

  • 【SMD 5050 LED Rope Lights】There are RGB color leds on 16.4ft flexible PCB board. You can control the rgb led tape color like as red/ green/ blue/....
  • 【IP65 Waterproof PCB】This 5M RGB length flexible strip is waterproof(IP65),indoor use only. The polyester resin material covering the PCB to....
  • 【Cuttable and Joinable】Please find the scissor mark, then you can cut the strip as you request.
  • Also you can use other strip tools to connect more....
  • 【With Adhesive Tape】On the back of PCB,there is double-side adhesive tape which can help you install it easier.(PS：Only one rgb led tape in the....
  • 【Perfect home decorations】You can install led tape lighting, under cabinet lighting, Car led lighting, Indirect lighting in crown molding, Tv Back....
Check Stock

GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.This is DIY kit,after you....
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some....
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to....
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering....
Check Stock

Soundstream AR1.2500D Arachnid Series 2500W Class D Monoblock Amplifier

  • 1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct....
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

Skyloong 64 GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

Gikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885

  • The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded..
  • Add 2pcs of QFP44 chip, double sided component layout, double welding..
  • High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully..
  • Please make sure all components in right direction and right place.
  • and check whether pseudo and float welding, this is very important in practicing....
Check Stock

Soundstream AR1.4500D Arachnid Series 4500W Class D Monoblock Amplifier

  • 1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct short, thermal, & overload circuit protection High/speaker level & low level/RCA input.
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

  • Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stock

HUANRUOBAIHUO 5.8GHz 9.4dBi Triple Feed Patch Antenna SMA Directional Circularl with Connectors for FPV Racing RC Drone Quadcopters Accessories

  • High Transmission Efficiency: The center frequency of the antenna is 5.8GHz, the signal transmission is better, and the radiation efficiency is....
  • PCB Double Panel: The antenna is made of PCB, 1.6mm thick double panel, and the whole process is sprayed with tin to ensure good passing performance....
  • Good Axial Ratio: The antenna has a good axial ratio, not only directly perpendicular to the patch, but also off-center..
  • Easy to Use: The antenna is easy to manufacture and has high precision, even for amateurs..
  • Professional Application: This is a pagoda antenna suitable for drones and goggles..
Check Stock

3Pcs Portable Waterproof Ink Electronics CCL Anti-Etching PCB Circuit Board Ink Marker Double Pen for DIY PCB Marker Pen

  • 3Pcs Portable Waterproof Ink Electronics CCL Anti-etching PCB Circuit Board Ink Marker Double Pen For DIY PCB Marker Pen.
Check Stock

DIERYA DK63N 60% Wireless Wired Mechanical Gaming Keyboard, RGB Backlit Bluetooth Keyboard w/Arrow Keys, 63 Keys Ultra-Compact Keyboard Full Keys Programmable w/Brown Switch for Windows Laptop PC Mac

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock