Reviews Double Flange Concentric Taper

Browning H 25 MM Split Taper Bushing 25mm Bore

  • External key on most sizes for positive drive and greater torque carrying capabilities.
  • Double-split barrel for positive clamping.
  • Solid flange to maintain concentric bores.
  • Available in inch, metric, and spline bores. Bore range from 3/8" to 10".
Check Stock

Browning H 12 MM Split Taper Bushing 12mm Bore

  • External key on most sizes for positive drive and greater torque carrying capabilities.
  • Double-split barrel for positive clamping.
  • Solid flange to maintain concentric bores.
  • Available in inch, metric, and spline bores. Bore range from 3/8" to 10".
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

WEN LA1334 3/4-Inch MT2 Crown Revolving Live Center for Wood Lathes

  • Crafted with maximum precision for high accuracy performance.
  • Internal ball bearings provide a smooth, concentric ride for your workpiece.
  • Spacious multi-tooth live center provides support to larger projects.
  • Crown measures in at 3/4 inches in diameter.
  • Taper fits perfectly into any lathe with an MT2 tailstock.
Check Stock

Pointer Knob, 1-1/8, 1/4X1/2 PH, 8-32 SS

  • Made from alloy steel 5155 with heat treat to RC 56-58.
  • Head Diameter?0.747" Head Angle ?15° Drawbar Thread Size?5/8"-11 Machine Taper Size ?CAT40 Neck Diameter?0.549" Hole?0.281" Pilot?0.641" Overall Length?2.001" Shoulder To Head?0.787" Shoulder To End?1.024".
  • High quality black oxide finish to ensure long enduring tool life.
  • Each retention knob is individually magnetic particle tested to ensure free of crack.
  • Fully ground on all critical surface including a pilot under the flange of retention knob for full contact between tool holder's taper end and retention knob.
Check Stock

Colonial Double Taper Candle Holder in Black Wrought Iron

  • Primitive decor double taper candle holder.
  • 7" tall, 7.5" wide, candles not included.
Check Stock

SPNEC Day-up Nordic Design of Modern Retro Minimalist Bedside Living Room Table Lamps,Metal Surface Treatment

  • Skirt-style light stand design: Flying skirt and light dance pose bring cheerful and flexible desig。.
  • Round glass and metal lampshade blending design。.
  • Glass lampshade: Concentric circle lampshade, the connection points are finely polished, the slender and beautiful simple line structure, and the flying double-layer concentric circle and line structure interweave design, let people see-bright。.
  • High quality: heavy-duty marble base, stable and reliable. Metal plating finish, anti-corrosion, anti-rust..
  • G9 socket bulb: This unique decorative table lamp uses a G9 bulb with a power of 3W and a color temperature of 3000K. (Note: G9 bulbs are not included)..
Check Stock

MompMuir 19mm Silicone Flange Inserts Compatible with Elvie Stride Lansinoh Medela for Spectra Insert Willow go TSRETE Momcozy S9 S12 Bellababy Maymom Pump Parts Reduce 24-25mm Elastic Nipple to 19mm

  • MompMuir 19mm Flange Inserts Compatible with Elvie/ Elvie Stride, Willow, Willow Gen 3, Momcozy S9/S10/S12, Compatible with Lansinoh, Freemie, Amada MYA, Bellababy, Spectra S1/S2, Medela, TSRETE, FEISIKE, Rainyb. It will reduce the 24-25mm breast shields nipple tunnel down to 19mm. 2pcs each pack..
  • The 19mm insert Suitable for nipple diameter 15-16mm(before a pumping session), or measure the circumference of nipple base about 47.10-50.24mm(before a pumping session)..
  • More different sizes are available, 15, 16, 17, 18, 19, 20, 21, 22mm. Soft silicone makes pumping more comfortable, and correct flange sizes make pumping more efficient..
  • Second Generation Improved Flange Inserts: two levels taper design for milk flow without blocking, do not reduce the suction of the original pump..
  • BPA and DEHP Free. SAME SUCTION AS ORIGINAL PUMP PARTS. EASY TO INSTALL & REMOVE. Boiling water safe, Steam safe, Dishwasher toprack safe. Food-safe, seamless design..
Check Stock

MAUREY MFG. H x 7/8\ Split Taper Bushing, H Series, 7/8\ Bore

  • Bushings are split through the flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit..
  • Has a set screw over the key to help maintain the bushings position on the shaft until the cap screws are securely tightened..
  • Carbon steel for strength and resistance to wear..
Check Stock

MAUREY MFG. H x 17MM Split Taper Bushing, H Series, 17mm Bore

  • Bushings are split through the flange and taper to provide a true clamp on the shaft that is the equivalent of a shrink fit..
  • Has a set screw over the key to help maintain the bushings position on the shaft until the cap screws are securely tightened..
  • Carbon steel for strength and resistance to wear..
Check Stock

Climax Metals C192E-156 Series 192 Locking Assembly, Steel, Zinc Plated, 1.56\ ID, 2\ Width, 1-9/16\ Shaft Diameter

  • Self-centering design with mounting flange.
  • For use in through-bored components with smaller pitch/outside diameters.
  • Mounted component remains fixed axially during installation.
Check Stock

PSI Woodworking PENPAL Portable 15-Pound Mini Penmaking Lathe

  • 1/5hp 110V variable speed motor (0-4300 rpm).
  • Tailstock uses #1 Morse Taper mount (1MT).
  • Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces.
  • Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, (5) 7mm bushings, 7mm drill bit, (2) collet wrenches.
  • Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket.
Check Stock

HEALLILY Dual Concentric Control Knobs Stacked Knobs for Electric Guitar Bass

  • Dual knurled concentric knobs, strong metal shell with great endurance and durability..
  • Great replacement for your broken, dirty or old volume tone control knob..
  • Control the tone and volume on the same pot. To be used with the dual concentric pot..
  • Compatible with all most Fender Strat/ Tele/ Gibson Les Paul electric guitar or bass..
  • Fits 6MM import concentric pots and split shaft pots,no screw hole on the knob..
Check Stock