Reviews Double Ferrule Fittings

Brennan N2501-04-02-SS Stainless Steel Compression Tube Fitting, 90 Degree Elbow, 1/4\ Tube OD x 1/8\ NPT Male

  • 90-degree elbow for connecting two pipes or fittings at an angle.
  • Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other.
  • Made of stainless steel for resistance to scaling and corrosion.
  • Double ferrule fitting reduces possibility of leakage.
  • Meets ISO 9001:2008 quality assurance standards.
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
Check Stock

304 Stainless Steel Compression Tube Fitting Double Ferrule Joint Connector Equal Straight Adapter(Φ1/2-Φ1/2)

  • STAINLESS STEEL: The 304 stainless steel compression tube fitting double ferrule construction for durability and resistance to corrosion..
  • SCOPE OF APPLICATION: The stainless steel compression tube fitting double ferrule has dual couplings for joining two tubes of the same diameter..
  • LESS LEAKAGE: This stainless steel compression tube fitting has a double ferrule construction, reducing the possibility of leakage..
  • SIMPLE OPERATION: Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut..
  • APPLICABLE MEDIUM: This stainless steel compression tube fitting double ferrule is applied to oil, water, gas and other non-corrosive or corrosive medium..
Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

DN15 Removed Freely Stainless Steel Double Ferrule Bulkhead Connector 20.3mm/0.8in External Thread 19.5mm/0.8in Internal Thread(Ф1/2)

  • DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
  • Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
  • DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
  • DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
  • The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..
Check Stock

Exchilerator Basic - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counterflow Wort Chiller - Great Home Brewers Gift

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the ExChilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photos).
  • COMES READY for you to apply 1/2 Inch National Pipe Thread fittings of your choice..
  • 5 GALLONS 5MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

  • ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
  • 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Check Stock

Anderson Metals - 57002-0604 Brass Hose Fitting, Connector, 3/8\ Barb x 1/4\ Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to hose on one end and has an NPT female connector on the other.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Litorange 3 Pack Metal Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter, 3/8\ Tube OD x 1/2\ NPT Male

  • ★ 【Material】: Heavy Duty Brass,strong and durable. Size: 3/8" Tube OD x 1/2" inch NPT Male Adapter..
  • ★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability..
  • ★ 【Function】: Fitting connects to tubing on one end and has an NPT male connector on the other. Use with copper, brass, aluminum, or plastic tubing..
  • ★ 【Tips】: Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. Primary uses water, gasoline, oil and vacuum lines..
  • ★ 【Package Include】: 3 PCS 3/8" Tube OD x 1/2" NPT Male connector. Comes with 1 year warranty..
Check Stock

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

Exchilerator Ready To Brew - Efficient Wort Chiller for Home Brew Beer - 25% Faster Than Stainless Steel Chiller - Best Counter Flow Wort Chiller

  • EASY TO USE - FAST CLEAN UP. The Maxx is for a brewer with pump, without pumps or with warm chilling water..
  • USES FDA COMPLIANT copper, PEX, stainless collars, lead free solder and lead free brass fittings. Unlike garden hose designs with so called adjustable nut and ferrule fittings, the Exchilerator is skillfully soldered the full length of the fittings this leaves no place for infections to hide! (see cross sectional photo).
  • READY TO BREW MANIFOLD INCLUDED temp gauge, 1/2" s/steel tee, 1/2" s/steel close nipple, 1/2" s/steel ball valve,brass garden hose adapters and a roll of Teflon tape comes standard on the Maxx.( see photo of parts included).
  • 5 GALLONS 5 MINUTES 5 YEAR WARRANTY. YOU DESERVE THE QUALITY AND WORKMANSHIP OF THE MAXX ON YOUR PERSONAL AND UNIQUE BREW STAND!.
  • COPPER CHILLS FASTER THAN STAINLESS BUY YOURS TODAY !.
Check Stock

Rishine Yoga Pants with Pockets for Women, High Waist Tight Fitness Leggings Workout Elastic Quick Drying Sweatpants Black

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock

ULTECHNOVO 10pcs Propane Natural Gas Connector 8mm Gas Pipe Fittings Brass Tube Fitting Adapter for Home Kitchen

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock