Reviews Door Panel Clamp

Panel Max Glue Press Four Way 43 Inch Long Clamping System For Small and Large Panels Keep Valuable Floor and Workbench Space Open While Gluing Up 39 Inch Maximum Width Flat Panels

  • Tired of buckled panels, messy gluing tables, heavy pipe clamps or loss of valuable floor or workbench space? Yeah, we were too! The Panel Max Glue....
  • The Panel Max Glue Press System applies even press on both ends and both sides of your panel project which helps create high quality joints and....
  • The length you can clamp is only limited by the length of your wall where the Panel Max is mounted, the number of mounting rails that are installed....
  • The Panel Max can clamp panel widths up to 41” using ¾” stock. With the max thickness stock of 5” you can clamp panel widths up to 39”. You....
  • The Panel Max Glue Press includes 1 each 39” mounting rail and 3 each 43” vertical clamp assemblies. We recommend using one vertical clamp 12”....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

  • Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
  • Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Heath Zenith SL-125-02 Wired Door Chime Transformer

  • Input: 120VAC - Output: 8VAC-10VA, 16VAC-10VA, 24VAC-20VA.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Glass Shower Door Hinges, Heavy Duty Glass Door 90 Degree Hinges Stainless Steel Bathroom Gate Clamp for 8-12 mm Toughened Glass, Rust Corrosion Resistance

  • 3-Layers Frosted spray sliver finish,Beautiful and elegant color and build to resist daily scratches,corrosions and tarnishing..
  • Notice: Fits 8mm-12mm or 1/3" to 1/2" Thick Glass,largest bearing 40 lbs per hinge.glass door hinge glass door hinges glass hinge glass shower door hinges hinges for glass doors shower clamps shower door hardware parts shower door hinges shower glass clamp shower glass door hinges shower hinges glass door.
  • glass door hinge glass door hinge shower glass shower door hinges shower glass door hinges Self closing from 25 degrees and self centering to 0 degrees in the closed position.glass hinge glass door hinges for cabinets glass shower door hinges glass door hinge cabinet hinges cabinet door limiter cabinet hinges glass clips for cabinet doors pivot hinges for cabinet doors hinge restrictor clip.
  • Included package:1x hinge,4X screws and expansion bolt, and 1 Allen key.glass door shower door hinges shower door hinge gold door hinges glass shower door hinges shower glass clamp shower door parts glass door hinges shower door hinges replacement glass door hinge.
  • shower door hinges glass shower door hinges heavy duty glass shower door hinges glass door hinges shower door hardware.glass shower door hinges shower door hinges wall to g....
Check Stock

Johnny Piano Portable Doorway Jumper for Baby Bouncers Swings Jump Up Stand Infant Columpio para Bebes Exerciser with Door Clamp Little Einstein Walker Activity Gymnastics Rocker Hanger Chair Seat

  • DOORWAY JUMPER: Jumper Exerciser with Door Clamp is sturdy designed for use with appropriate door frames..
  • FREEDOM: It gives your baby complete freedom of movement and promotes easy, natural breathing. Babies build strength, balance and coordination safely and comfortably..
  • TOY: Children's toys on the panel, kids have fun jumping and playing with the toys.
  • AGE: Suitable for babies from 6 months, who can sit on their own and weigh a maximum of 12 kg..
  • HANGERS: Height is adjustable. Spring Hanging Apparatus (Only attached to the door jamb.).
Check Stock

FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

  • √ 【HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC.】 : Fivepears presents one of the most advantage tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Fivepears Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch..
  • √ 【GRIP HANDLE FOR ONE-HAND CARRYING】 : This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover..
  • √ 【SOLID METAL CONSTRUCTION】: This drywall gripper is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
  • √ 【SELF-ADJUSTING GRIPPER CLAMP】: This piece of equipment by Fivepears has a ....
Check Stock

Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. Ideal For Woodworkers and Cabinet and Furniture Makers

  • Clamping Panels Can Certainly Be A Challenge. Especially When We Try To Use Everyday Pipe Clamps Or Bar Clamps. While These Types Of Clamps Work Fairly Well On Certain Glue Up Projects, The One Thing They Don’T Do At All Is Apply Pressure From The Top And Bottom Of The Panels During Glue Up. In Fact, With All The Pressure Being Applied On Both Sides, Bar And Pipe Clamps Will Almost Certainly Bow, Buckle Or Rack Your Panel Glue Up Project.
  • Let’S Make Racked Panel Glue Ups A Thing Of The Past. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time.
  • Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock.
  • Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Hal....
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

uxcell Glass Door Hinge - 0 Degree Cupboard Showcase Cabinet Door Hinge Glass Clamp,Zinc Alloy, for 5-8mm Glass Thickness 4Pcs

  • 1.Glass Clamps Champagne Gold Made of brand new high quality 201 stainless steel, electroplating process, brand new and pleasing gold, I believe you will like this bathroom glass door clamp.Constructed from high quality Stainless Steel,ensuring quality and longevity,sturdy and durable.
  • 2.hinges for glass doors 4mm-Thick Brushed finish stainless steel will not rust,build to resist daily scratches.Weight is 480g..
  • 3.Notice: Fits 8mm-12mm or 1/3" to 1/2" Thick Glass,largest bearing 40 lbs per hinge Self closing from 25 degrees and self centering to 0 degrees in the closed position.
  • 4.201 Stainless Steel Shower Glass Door Hinge 90 Degree Wall-to-Glass ressure screws will hold 1/4'' thick glass securely in hinge,201 Stainless Steel 90 Degree Clip Code Fixed Shower Room Hardware Accessories Bathroom Angle Glass Door Hinge Stainless Steel Brushed Nickel Gold bathroom clamp cushioning shower room accessories glass door hinge glass clip.
  • 5.Included package:2x hinge,8X screws and expansion bolt, and 2 Allen key,Heavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replacement Part Wall-to- Glass Stainless Steel Brushed Nickel Clamps Heavy Duty 90 Degree Glass Door Cupboard Showcase Cabinet Clamp Glass Shower Doors Hinge Replaceme....
Check Stock

Goldblatt 2 Pack Panel Carrier, Plywood Lifting Tool, Drywall Carrying Tool - Plywood Carriers Tool for Wood, Synthetic Cement Board - Clamping Thickness up to 3/4 inch

  • 【Heavy support for gypsum board, plywood, etc】: This is the most advantageous tool for lifting and bearing various plywood, panels, boards and slabs. Grab and move MDO or MDF panels, directional wound panels, melamine, gypsum boards, table tops, metal panels and other boards. The self-adjusting fixture can accommodate panel thicknesses from 0 to 1 inch.
  • 【Handle with one hand】: This panel/plywood lifter has a durable, impact-resistant ABS handle, allowing a person to easily lift and carry the entire length of material with only one hand. The clamp can clamp up to two plates or panels at a time and can withstand a load of up to 200 pounds. Use this convenient sheet and panel mover to complete work faster.
  • 【Solid metal structure]】: This gypsum board fixture is durable and adopts a heavy-duty solid metal structure. The clamp and the handle arm are machined from aviation-grade aluminum, while the joints are made of solid steel bars. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality structure ensures that the tool can withstand violent lifetime use.
  • 【Self-adjusting clamp】: Autoly's device has a universal but simple design, allowing clamps to clamp various types of panels and sheet goods. Once you start lifti....
Check Stock

Dragon Pet Door for Sliding Glass Doors | Pet Friendly Dog Door for Black Aluminum Frame Sliding Doors | Economical Sturdy Design Patio Door Insert | Medium, Single Flap | Height Range: 77.75"-80.25"

  • ... STURDY ALUMINUM FRAME…dog door insert for sliding patio doors available in 3 height ranges and require minimum track thickness of at least 1" (thicker tracks may need shimming). Measure from lowest point of inside track to highest to fit your doggie door insert. Medium size flap pet door panel inserts require 13.6" of room in your sliding glass door..
  • PET FRIENDLY AND SAFE…Dragon Pet Door 2-piece insulated flap design is tough and pet safe, available in single flap for moderate climates or double flap for maximum weatherproofing.
  • includes a sturdy locking cover to block access when not in use.
  • engineered to maximize efficiency while giving your pets the freedom to go outside as they please.
  • SIMPLE TO INSTALL…our pet door insert for sliding glass doors installs in moments, requires flat-head screwdriver.
  • includes a c-clamp lock to secure your door (you can install a charley-bar for additional security).
  • FREEDOM FOR YOUR PET...with the benefit of a sliding door doggie door insert, you no longer need to hold open the door for your pet.
  • Give them the pet safe freedom of the outdoors, while k....
Check Stock