Reviews Door Hinge Jig

Aluminum Alloy Door Hinge Jig ，Door Hinge Hole Woodworking Hole Opener Slotting Locator ，Hinges for Wood Cabinet Kitchen Door Lock Installation

  • Hinges for Wood: Hinge jig is perfect for wooden door hinge groove. The door hinge jig can help you complete the installation quickly. Make the installation of door hinges more convenient, easy and improve work efficiency..
  • High Quality: Multifunctional wooden door slotting locator is made of aluminum alloy, which is sturdy and durable. It comes with an adjustment wrench, a trimming and bottom cleaning tool, and a rubber anti-slip design, which is safe to hold and does not hurt the facade..
  • Hinge Jig: Size: 34*20CM, the door lock jig can be opened with a maximum size of 18CM, and a maximum clamp of 6CM. It is easy to adjust and use with its own scale,use door hinge jig for router..
  • Positioning Adjustment: flexible adjustment in four directions, precise positioning, slotted guide plate of the lock body, under the aluminum positioning pressure plate and precise scale, the slot can be slotted according to the hinge you need to install..
  • Note: The hinge jig needs to be used with a trimmer. After grooving, all the corners are rounded. It needs to be trimmed to a right angle and then ins....
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

35mm Concealed Hinge Jig Kit, Woodworking Tool Drill Bits Hinge Drilling Hole Router Jig for Cabinet Cupboard Door Installation

  • Hinge punching locator: This hinge drilling hole router jig kit is the most useful tool for using concealed hinges for your doors..
  • ABS plastic material: 35mm hinge drilling jig is made of high quality engineering plastic, this hinge hole drill guide is durable. This is a set of drill guide tool used for convenient hinge hole drilling, light and portable, easy to operate..
  • Easy to use: Suitable for their own home operation, do not need professionals. Simple to use with any drillno special tools needed. Make cabinet door installation easy..
  • Efficient high precision drilling: You may speed up 50% comparing with the traditional drilling method and can make all flat-bottomed holes of the exact size..
  • Application: 35mm hinge drilling jig comes with a 35mm forstner bit and depth stop. The concealed hinge jig is suitable for 35mm hinges..
Check Stock

35mm Concealed Hinge Boring Jig Wood Furniture Door Cabinets Hinge Installation Tool Hinge Hole Drilling Guide For Carpentry ABS Plastic

  • Quick hinge installation jig:The hinge drill guide can help you quickly drill the perfect concealed hinge hole. Suitable for furniture door cabinet....
  • Features a V-locator that works off of a center reference line.
  • Can be adjusted for changes in door edge to cup alignment.
  • ABS plastic hinge pocket hole jig,lightweight and portable, easy to operate.
Check Stock

Adoles Aluminum Door Hinge Jig,Woodworking Door Hinge Template,Slotting Locator,Suitable For Door Lock Jig And Router Jig,Helps You Install Quickly

  • 【SlLOTTING RANGE】 Maximum clamping 2.4 inches door panel slotting, maximum opening 7.1 inches, hole puncher comes with a scale length and width positioning support four-way flexible adjustment, powerful door hinge installation kit.
  • 【ALUMINUM ALLOY MATERIAL】 High-quality aluminum alloy one-piece molding, strong and durable, can be used as a woodworking door hinge template kit for router long-term use.
  • 【CONVENIENT AND QUICK ADJUSTMENT】With butterfly screws for quick adjustment of slotting size, the clamping part is designed with rubber anti-slip to ensure that the surface of the wooden door is not damaged. It is the choice of professional woodworkers..
  • 【MULTIPLE USE FUNCTION】 Can be used as door hinge template hinge slotting and can also be used for lock body guide slots and other slotting applications and designs, newcomers need to adapt to the tool to gain experience after more convenience and fast..
  • 【HINT】Router jig needs to be used with a trimming machine. After the slotting is completed, you need to pay attention to the milling knife touching the hinge jig, w....
Check Stock

Mobile Home Parts 3 New Storm Door Hinges Aluminum-Door Hinges-Gate Hinges-Door Hinge-Cabinet Hinge-Door Hinge jig-Door Hardware

  • 3 Storm Door Hinges Aluminum-Door accessories-Door hinge router jig-Mortise door hinge.
  • Hardware hinges-Outdoor hinges-Utility hinge-Hinge hardware-Hinge guide-Door hinges tools-Hinge template kit.
Check Stock

KKUYT 35mm Concealed Hinge Jig Accurate Locking Hinge Drilling Jig Hole Guide Hole Puncher Locator Woodworking Tool for Door Cabinets Hinges Mounting

  • 【Premium & Durable Material】The 35mm concealed hinge jig is made of high-quality aluminum alloy material, with precision manufacturing, sharp....
  • 【Adjustable Pressure Plate Design】The adjustable black pressure plate is convenient for you to accurately position, adjust the drilling guide to....
  • 【How to Install & Use】1. Install a 35mm hole opener, adjust the drilling depth to 12-13mm, then lock the limit ring. 2. Adjust the black pressing....
  • 【Wide Application】The 35mm hinge jig is widely used for hinge opening installation, door hinge drilling position, woodworking hole auxiliary....
  • 【Perfect Choice】Hinge drilling jig with complete tool, easy to assemble and disassemble, no needed other special tools, very convenient to use, a....
Check Stock

35mm Concealed Hinge Jig Kit Briidea Door Hinge Drilling Jig Hole Guide Woodworking Tools for Kitchen Cabinet Cupboard Door Hinges

  • MAKE THE PROCESS EASIER: Make cabinet door installation easy! Extremely simple to use with any drill, no need to draw line, no special tools needed.....
  • ACCURATE POSITIONING: The indexing cams and built-in measuring scales ensure exact hinge cut positioning. Mounting accurately every time whether you....
  • ADJUSTABLE DESIGN: Adjustable cams ensure proper hinge offset, limited to 3, 4, 5, and 6 millimeters, which relate to the distance from the edge of....
  • HIGH QUALITY MATERIAL: The drill bit of door hinge jig is made of 304 stainless steel, razor sharp and easy to drill a new hole effortlessly without....
  • PRACTICAL: The concealed hinge jig is suitable for 35mm hinges and also 26mm hinges, just put the 26mm auxiliary adjustment accessories on the back of....
Check Stock

DUEBEL Cabinet Hardware Jig 35mm Concealed Hinge Jig with Clamp Forstner Drill Bit Drilling Guide Hole Punch Locator Kit Woodworking Cabinet Door Installation Tool Aluminum Alloy Hole Locator

  • 【HANDLE WITH FASTENING DEVICE】The handle clamps the plate, no pliers are needed, DUEBEL punch locator drill guide has a fastening device. No need for extra clamp, including clamp itself, quick locating and fastening..
  • 【4 GEARS ADJUSTABLE EDGE DISTANCE OF PLATE】Easy to adjust, just use a wrench to loosen the screw, that’s OK. DUEBEL hinge drilling jig come with 2 simple wrenches. Drilling depth adjustable, adjust the distance between the limit ring and the drill sleeve to determine the depth of the hole..
  • 【DESIGNED FOR 35MM HINGES】This concealed hinge jig kit designed for 35mm hinges, no need for measuring, make cabinet door installation easy..
  • 【HEXAGONAL SHANK DRILL】Door jig kit with the hexagonal socket, the tool and the electric drill are no longer restricted, and the use is more convenient..
  • 【HARD ALUMINUM ALLOY BLADE】DUEBEL pocket hole jig kit comes with forstner drill bit, CNC fine grinding,thickening alloy knife blade. Package including: door installation kit * 1.
Check Stock

Upgraded 35mm Cabinet Hinge Jig, Aluminum Concealed Hinge Jig Kit for Drilling Hole, Boring Guide for Soft Close Cabinet Door Hinges – 35mm Hole Cutter Included

  • 【Premium & Durable Material】The 35mm concealed hinge jig is made of high-quality aluminum alloy material, no overheating melted worries. Come with a 35mm carbon steel drill bit, CNC fine grinding, thickening alloy knife blade, wear-resistant and durable, anti-corrosion and rust-proof, a cabinet door hinge jig can be used for years..
  • 【Quick Fix & Release Handle】This cabinet hinges jig has an adjustable platen and a quick-fix clip where boards can be quickly positioned and tightened–no movement enables more solid drilling. Fixing or releasing just in one handle, no pliers needed..
  • 【Adjustable Drilling Depth】Adjust the distance between the limit ring and the drill sleeve to determine the depth of the hole. This concealed hinge jig is suitable for boards with a thickness of 10mm to 20mm, adjust the drilling depth of 12-13mm normally. No longer worry about damaging your cabinet doors with it..
  • 【Upgraded All-in-one Design】: Built-in hinge positioning hole making quick locating screw hole position, the attached limit frame precisely locates the exact distance from the center of the hole to the edge of the wood. All-in-one designed to make the main body become sturdy and not easy to shake..
  • 【Excellent Woodworking Tool】: Upgraded concea....
Check Stock

Hinge Drilling Jig 35MM Forstner Bit Woodworking Tool Drill Bits Hole Boring Jig Cup Style Concealed Hinge Jig Drill Guide Set Door Hole Template for Kreg System

  • PREMIUM MATERIAL & FAST DELIVERYThe hinge Jig drilling is made of high quality engineering plastic, which are durable.Shipped from US, you will....
  • CONVENIENT TO USEThis is a set of drill guide tool used for convenient hinge hole drilling.With this drill guide, you can drill hinge holes....
  • EASY TO USESimple to use with any drill - no special tools needed.
  • adjustable cams ensure proper hinge offset.
  • ACCURATE HOLE POSITIONHole position is accurate, no need to draw lines, suitable for 35mm hinge.
  • PRACTICAL TOOLThe Concealed Hinge Jig allows you to drill cup holes for concealed cabinet door hinges, it is a practical tool.
Check Stock

Door Hinge Jig, Door Hinge Mortiser, Hinge Installation Kit, Door Hinge Router Template Fits for Door Hinge from 3” to 5” Length and 1/4” or 5/8” Thickness.

  • 【Intergrated Door Hinge Mortiser.】 Thanks to two removable plastic inserts, our door hinge installation kit is a fantastic accessory to have on hand for cutting and installing door hinges of round or sqaure corner hinges. This jig allows you to cut professional looking mortises in the doors of hinge from 3” to 5“ length and 1/4” and 5/8“ thickness. (Template Size: 7.8” L×3.5”W×2”H.).
  • 【Easy to Install and Use.】The hinge router template can be adjusted for both hinge length, thickness, and round vs. square corners. Also, it has a built-in depth gauge on the side for the attached router bit to set depth and comes with a self-centering hinge bit to ensure hinges screws are perfect. The corner pieces for routing different radius hinges work well too..
  • 【No Need for a Hammer and Chisel.】You just need to use this hinge template and a router or compact router to install your door hinge.(Router not included) Located on outer wall of routing area, just set the depth by using the router bit depth gauge and cut out the door hinge shape from template area.(Thin hinges: 3”,3-1/2”.4” on the left and thick hinges: 4-1/2”,5” on the right.) Definitely better and faster than using a Chisel..
  • 【Durable and Reliable Structure.】Made of....
Check Stock

Kreg Hardware Installation Kit with Jigs and Two 3-Inch Face Clamps

  • This Hardware Installation + Pocket-Hole Jig Kit is great for cabinetry projects, and features two best-selling hardware jigs from Kreg.
  • Concealed Hinge Jig: Accurate hinge positioning with built-in indexing tabs. Reliable drilling with bit guide and stop collar..
  • Kreg Pocket Hole Jig 310: Portable jig for creating pocket-hole joints. Simple set up and easy to use with material-thickness stops..
  • clamps materials up to 2 3/4″ thick. Helps create a flush joint during pocket-hole assembly..
  • Includes 1 Concealed Hinge Jig, 1 Cabinet Hardware Jig, 1 Cabinet Hardware Jig and 2 Classic Face Clamps.
Check Stock