Reviews Dome Head Semi tubular Rivets

Yinpecly 0.24\x 0.71\(D x H) Aluminum Flat Head Semi Tubular Rivets for Fasten Work Pieces Silver Tone 50pcs

  • Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..
Check Stock

100 Pcs 9/64\X3/16\ Stainless Steel Truss Head Semi-Tubular Rivets Super-Deals-Shop

  • Semi-tubular rivets are often the preferred rivet style for joints where movement is required (pivot points), because the rivet material only swells at the tail. Common applications for tubular rivets include light fixtures, HVAC ducts, electronics, ladders, and brakes, among many others..
Check Stock

Louisville Ladder FS1508 Ladder, 8-Foot, Orange

  • ...S OR EXCEEDS INDUSTRY STANDARDS: Louisville Ladder is committed to meet or exceed all safety standards set by ANSI and OSHA.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

Louisville Ladder FS1504 Ladder Step FBRGLS TYPE1A 4FT, 4-Feet, Orange (Renewed)

  • The product is 4 foot fiberglass type 1A stepladder.
  • Molded top with handyman’s tool slots, molded-in slots help keep tools close at hand.
  • 300 pound load capacity, includes weight of user and tools.
  • Each step secured with six, large headed, semi-tubular steel rivets for maximum strength.
  • Nonconductive full channel rails are covered with a polyester veil for years of durable service.
  • Heavy duty bottom back brace provides additional strength to the bottom of the ladder.
  • 300 Lbs, load capacity, includes weight of user and tools. Multifunctional Raptor Top With Multiple Tool Slots And Magnet.
Check Stock

100pcs Aluminum Oval Head Semi-Tubular Rivets - 3/32\X1/4\ OHTR332140

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-171.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

Louisville 6' Fiberglass Step Ladder

  • WORK BECOMES EASIER: Molded Top With Handyman's Tool Slots.
  • STURDY AND STRONG: With its 300-Pound capacity, elegant design and smooth finish, you won’t find a more durable, reliable ladder..
  • DESIGNED FOR YOUR NEEDS: Molded top with recessed tray, nonconductive structural molded top.
  • PROTECTED: Inside spreader braces keep your ladder protected while in transport as well as provide as safe and stable ladder.
  • 300-POUND LOAD CAPACITY, includes weight of user and tools.
  • Molded top with handyman's tool slots, molded-in slots help keep tools close at hand.
  • 300-pound load capacity, includes weight of user and tools.
  • Each step secured with six large-head semi-tubular steel rivets for maximum strength.
  • Non-conductive full-channel rails are covered with a polyester veil for years of durable service.
  • Heavy-duty bottom back brace provides additional strength to the bottom of the ladder.
Check Stock

Louisville Ladder FS1503 300-Pound Duty Rating Fiberglass Step Ladder, 3-Feet

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step xonstruction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30% greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

Louisville FS1502 Fiberglass Heavy Duty Step Ladder, 28 3/8", 2-Step, Orange

  • Fiberglass is non-conductive when clean and dry.
  • 300 Lbs, load capacity, includes weight of user and tools.
  • Double rivet step construction, each step secured with six, large headed, semi-tubular steel rivets for maximum strength, 30 percent greater shear strength than solid aluminum rivets.
  • Inside spreader braces, spreader braces inside fiberglass rails help keep braces from getting hooked or abused during transit.
  • The ladder meets or exceeds the safety standards set by ANSI, American National Standards Institute and OSHA, Occupational Safety and Health Administration.
Check Stock

5/32\ x 1/4\ (DF11-8-ST) Steel Semi-Tubular Rivet with a 5/16\ Diameter Oval Head - Zinc Finish (Pack of 100)

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-178.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock