Reviews Dome Head Grip Fast Rivets

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

USA Fittings 100 Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-4 1/8 Diameter x 1/4 Grip Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • #4 (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • 4-2 Grip Range: (0.020 - 0.125), 4-4 Grip Range: (0.188 - 0.250).
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

Metal Magery 100 Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-4 1/8 Diameter x 1/4 Grip Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

Black Pop Rivets 1/8 Diameter #4 All Aluminum Painted Blind Rivets 4-3 1/8 x 3/16 Grip QTY 250

  • 4-3 Grip Range: 3/16" (0.126 - 0.187), 4-4 Grip Range: 1/4" (0.188 - 0.250).
  • Paint finish on a 1/8 All Aluminum Pop Rivet.
Check Stock

USA Fittings Copper Pop Rivets 1/8 Diameter Brass Mandrel Blind Rivets Dome Head 4-2 1/8 Diameter x 1/8 Grip 1/8 Diameter x .063-.125 Grip Range Qty 100

  • Open End Dome Head Copper Rivets with Brass Mandrel.
  • (1/8 inch) Diameter Blind Rivets - Corrosion & Rust Resistant with a Decorative Finish.
  • Great for a wide variety of applications and commonly used for for fastening copper or brass sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

Glarks 210Pcs 6 Size Aluminum Body Steel Mandrel Dome Head Blind Rivets Pop Rivets Assortment Set

  • Type: Round Dome Head Open End Aluminum Blind Rivet.
  • Material: Made of high quality aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
  • Head Size: Diameter 3/16"(4.8mm), Length: 1-3/16"(30mm). Grip Pange: Diameter 3/16"(4.8mm), Length: 3/4"-1"(19-25mm).
  • Applications: Widely used in construction, automobile, ship, aircraft, machinery, electric equipment, furniture, etc. Especially suitable for the riveting occasions where is not convenient to adopt ordinary rivet..
Check Stock

HJ Garden 25pcs 1/8 x 1/2 Inch 3.2x12mm Red Copper Blind Rivet Self-Plugging Open End Dome Head Decorating Fastener Nails Pop Rivets Core Pulling Rivets Grip Pange 5/16-3/8 Inch 7.9-9.5mm

  • Type: Round Dome Head Open End Red Copper Blind Pop Rivet.
  • Material: Made of high quality copper alloy, aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
  • Head Size: Diameter 1/8"(3.2mm), Length: 1/2"(12mm). Grip Range: Diameter 1/8"(3.2mm), Length: 5/16"-3/8"(7.9-9.5mm).
  • Applications: Widely applied to indoor or outdoor for plate splicing, object fastening etc. Installed with rivet gun, single direction operation, fast and convenient to use..
  • Package: 25pcs 1/8 x 1/2 Inch (3.2x12mm) Copper Blind Rivets.
Check Stock

HJ Garden 60pcs 1/8 x 1/2 Inch 3.2x12mm Red Copper Blind Rivet Self-Plugging Open End Dome Head Decorating Fastener Nails Pop Rivets Core Pulling Rivets Grip Pange 5/16-3/8 Inch 7.9-9.5mm

  • Type: Round Dome Head Open End Red Copper Blind Pop Rivet..
  • Material: Made of high quality copper alloy, aluminum alloy, never rust, good anti-corrosion property, sturdy, light, durable and long life..
  • Head Size: Diameter 1/8"(3.2mm), Length: 1/2"(12mm). Grip Range: Diameter 1/8"(3.2mm), Length: 5/16"-3/8"(7.9-9.5mm)..
  • Applications: Widely applied to indoor or outdoor for plate splicing, object fastening etc. Installed with rivet gun, single direction operation, fast and convenient to use..
  • Package: 60pcs 1/8 x 1/2 Inch (3.2x12mm) Copper Blind Rivets..
Check Stock

Metal Magery 50 Copper Pop Rivets 4-2 1/8 Diameter x 1/8 Grip Steel Mandrel Blind Rivets Dome Head Qty 50

  • Open End Dome Head Copper Rivets with Steel Mandrel.
  • Great for a wide variety of applications and commonly used for for fastening copper sheets.
  • Perfect for most environments because of their superior thermal and electrical conductivity.
Check Stock

HAUTMEC Heavy Duty Rivet Gun,Pop Rivet Gun with 4 Interchangeable Rivet Heads,Durable Hand Riveter for Plastic, Metal, Leather, Wood HT0125-HR

  • Sturdy Material:This heavy duty hand rivet gun in high grade aluminium die cast body and drop forged carbon steel handle, the three-piece chrome molybdenum steel chuck jaws in gun head provides professional riveting power and a longer life..
  • 4 Interchangeable Head:3/32"(2.4mm), 1/8"(3.2mm), 5/32"(4mm), 3/16"(4.8mm). This manual rivet gun handle three types of rivets:aluminum, steel, and stainless steel rivets.Please note:4mm Rivet head is not suitable for use with stainless steel rivets only can be use about 50 times. 4.8mm Rivet head is not recommended for use with steel and stainless steel rivets..
  • Working Efficiency:The spring-loaded long handle makes rivet saving 25% grip stength and a slip resistant grip for precise rivet placement..
  • Easy to Use:Portable wrench for changing out rivet heads easily, with built-in storage in handle allow more efficiency and convenience..
  • Wide Application:Great for metal work, gutter, automotive, aviation, railway, elevator, instrument, furniture and other common projects..
Check Stock

Stainless Steel Pop Rivets 3/32 Diameter #3 All 304 Stainless Steel Blind Rivets 3-2 3/32 x 1/8 Grip 0.032-0.125 Qty 100

  • Open End Dome Head Pop Rivets (Blind Rivets).
  • All 304 Stainless Steel Construction for Long Lasting Applications - Excellent Corrosion & Rust Resistance.
  • Rivet Diameter: 3/32 inch (#3, 0.094 inch).
  • Drill (Hole) Size: #41 Bit, 3/32" Hole (0.096 - 0.100).
Check Stock