Reviews Dock Bumper Installation Hardware

Sav-A-Dock Patented Protection Bumper System, Boat Dock Shielding, 8 and 4 Foot Horizontal and 4 Foot Vertical Configurations, Hardware Kit Included, Protection Guaranteed (Black, 8 Foot Horizontal)

  • HAPPY, DAMAGE-FREE LAKE LIFE: Tired of your boat bouncing against that wood and other materials? Tired of stringing buoys off the side of the boat? Ensure it is protected with the patented Sav-A-Dock protection unit..
  • WHAT'S IN THE BOX: 8 or 4 foot Horizontal or 4-foot Vertical sleeve, foam cylinders, hardware mounting kit, and easy-to-follow installation instructions. Our patented bumper system is anchored securely to the edge, making sure your dock does not become unprotected in rough waters..
  • EASY DIY INSTALLATION: Install and relax while your boat and dock are taken care of for years to come. Our protection units are aligned parallel with the dock and horizontally allowing for maximum coverage..
  • 100% PROTECTION: The horizontally and vertically aligned buoys allows for the bumper system to protect every inch! No more do you have to worry about buoys popping up and over the dock. Save time and money with a Sav-A-Dock shielding system..
Check Stock

LUVERNE 2090615-3 10-Inch Universal Rubber Bumper Guard Protector Strips Loading Dock Rear Fender Pad Bump Stop, 3-Pack

  • EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers.
  • TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon.
  • VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides.
  • UNIVERSAL FIT. These rubber bumper protectors are 2-1/8 inches x 1-7/8 inches x 10 inches. They perfectly fits the LUVERNE Impact shock-absorbing rear bumper step, or they can be mounted anywhere needed.
  • HARDWARE NOT INCLUDED. The two holes in each bumper come ready to accept 1/4-inch hardware (included). Drilling may be needed on the mounting surface.
Check Stock

Vestil V-1124-6 Rubber Vertical Laminated Dock Bumper, 24\ Length, 11\ Width, 6\ Depth

  • Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
  • 6" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil Rubber Specialty Molded Dock Bumper, T-Shaped, 22\ Length, 22\ Width, 3\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 6" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil V-1120-4.5 Rubber Vertical Laminated Dock Bumper, 11\ Width, 20\ Height, 4.5\ Depth

  • Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil 1224-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 24\ Width, 4.5\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil 1236-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 12\ Height, 36\ Width, 4.5\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Vestil 1024-4.5 Horizontal Laminated Dock Bumper, Fabric Reinforced Rubber, Rectangular, 4 Holes, 10\ Height, 24\ Width, 4-1/2\ Depth

  • Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4-1/2" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced for strength and dimensional stability.
  • Steel mounting and tie rods for strength and durability.
  • Welds to dock or bolts to dock for easy installation.
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Herco 18\ Laminated Rubber Loading Dock Impact Bumper

  • Manufactured with laminated sheets of rubber compressed between steel angles for strength and durability.
  • Designed for use on loading docks to protect trailers and dock area.
  • Bolt or weld bumper to the dock for quick and easy installation.
  • Made from recycled truck tires for long lasting use.
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock