Reviews Dock Bumper Bracket Hardware

Tommy Docks Hook and Eye Seawall Bracket Set - Stationary Dock Shoreline Connector Piece - Steel Galvanized Boat Dock Hardware Part

  • DIMENSIONS: Eye bracket is 5 5/8 inches long by 3 inches wide.
  • Hook bracket is 6 inches long by 3 3/8 inches wide.
  • Hook is 2 inches long and is offset 1/2 inch out away from the bracket.
  • PREMIUM QUALITY: Galvanized steel construction gives it added corrosion resistance and durability.
  • EASY TO INSTALL: Eye section attaches to the seawall or bulkhead and the hook section attaches to the dock section.
  • LOW PROFILE: Narrow bracket profiles allow for a minimal gap between the dock section and the shoreline attachment.
  • WARRANTY: Tommy Dock products are backed by a one year limited warranty.
Check Stock

LUVERNE 2090615-3 10-Inch Universal Rubber Bumper Guard Protector Strips Loading Dock Rear Fender Pad Bump Stop, 3-Pack

  • EXTRA PROTECTION. These rubber bumper strips increase protection on your delivery van, work truck and a variety of commercial vehicles, as well as trailers.
  • TOUGH RUBBER. The rear bumper protector rubber is a tough black rubber to withstand bumps and abrasions from a loading dock, guard rail or pylon.
  • VERSATILE. These rubber bumper guards are great for protecting the rear bumper, front bumper, rear step and sides.
  • UNIVERSAL FIT. These rubber bumper protectors are 2-1/8 inches x 1-7/8 inches x 10 inches. They perfectly fits the LUVERNE Impact shock-absorbing rear bumper step, or they can be mounted anywhere needed.
  • HARDWARE NOT INCLUDED. The two holes in each bumper come ready to accept 1/4-inch hardware (included). Drilling may be needed on the mounting surface.
Check Stock

Sav-A-Dock Patented Protection Bumper System, Boat Dock Shielding, 8 and 4 Foot Horizontal and 4 Foot Vertical Configurations, Hardware Kit Included, Protection Guaranteed (Black, 8 Foot Horizontal)

  • HAPPY, DAMAGE-FREE LAKE LIFE: Tired of your boat bouncing against that wood and other materials? Tired of stringing buoys off the side of the boat? Ensure it is protected with the patented Sav-A-Dock protection unit..
  • WHAT'S IN THE BOX: 8 or 4 foot Horizontal or 4-foot Vertical sleeve, foam cylinders, hardware mounting kit, and easy-to-follow installation instructions. Our patented bumper system is anchored securely to the edge, making sure your dock does not become unprotected in rough waters..
  • EASY DIY INSTALLATION: Install and relax while your boat and dock are taken care of for years to come. Our protection units are aligned parallel with the dock and horizontally allowing for maximum coverage..
  • 100% PROTECTION: The horizontally and vertically aligned buoys allows for the bumper system to protect every inch! No more do you have to worry about buoys popping up and over the dock. Save time and money with a Sav-A-Dock shielding system..
Check Stock

Front License Plate Mounting Kit- Universal License Plate Bracket & Black Aluminum Car Tag Frame for 2 Drill Hole Front Bumper, Adapter Holder with Anti-Theft Screws Bolts Caps Covers, Fastener Nuts

  • ...hape of the vehicle to drill again, and no need to purchase a license plate adjuster of a special vehicle model. Our universal bracket is suitable for all vehicles with contoured bumpers, or as a spacer recessed into the plate area at the rear of the vehicle.
  • HEAVY DUTY LICENSE PLATE FRAME- Front license plate mount hardware kit- 6 x 12 inch, suitable for standard novelty US or Canadian plate mount. Durable and long lasting! 4-hole black aluminum license plate frame, slim edges, will not cover the license plate Registration sticker, legal street. Heavy-duty ABS plastic bracket and Lightweight Aluminum alloy frame, anti-corrosion and anti-rust, black powder coating on the surface, with black license plate screw cap, make your license plate cool.
  • EASY TO INSTALL- All the front license plate mounting hardware is included- plastic license plate bracket, license plate metal frame, stainless steel license plate screws, inserts nuts, black screw cap covers. M6*20mm or M5*16mm screws to fasten the bracket On the bumper, M6*12mm anti-theft license plate bolts fix the car tag and frame on the bracket. No additional hardware is required to install in a flash, is the best choice for front license plate mount.
  • RUST-PROOF. RATTLE-PROOF. WEATHER-PROOF- The license pla....
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

Hooke Road for Ford F150 09-14 Steel Front Winch Bumper + Rear Bumper Compatible with F-150 2009 2010 2011 2012 2013 2014 (Excluding Raptor) Pickup Truck

  • FITMENT: Both front and rear bumper for Ford F150 2009-2014 (Excluding Raptor) Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors.).
  • DESIGN: Aggressive, angular off-road design and full protection bumpers. Front bumper equipped with a 12000-pound capacity winch plate. Rear bumper compatible with factory receiver hitch. Rear bumper include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 11-gauge(1/8 Inch) steel for front and back bumper main body.
  • 8-gauge(11/64 Inch) for mounting bracket plates..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 92 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 65 lbs)..
Check Stock

Deluxe Yamaha Banshee (1987-2006) Black Intimidator Front Bumper Bundle with Matching Rear Grab Bar Bumper

  • Our deluxe bundle offers 2 of our best-sellers to give your ride the ultimate style. Bundle includes our Intimidator style front bumper for the Yamaha Banshee (1987-2006) with a matching rear grab bar bumper (also referred to as a pull bar). Items are polished and anodized for a sleek and long lasting finish. This is the ideal set to give your ATV that extra flair, or the perfect gift set for the rider in your life!.
  • Top quality front bumper constructed of welded aluminum. Polished and then anodized for excellent finish..
  • Standard style aluminum rear grab bar bumper (also referred to as a pull bar). High quality finish. After assembly the surfaces are buffed (removing any marks) and then anodized..
  • Hardware for bumpers is included in ATV models not using stock hardware. Grab bar includes integrated bracket for your flag as well as mounts for a light or number plate..
  • Fitment specific to ensure proper installation every time!.
Check Stock

Dasen Saddlebag Mount to Fender Support Bracket Compatible with 1984-2008 Harley Davidson Touring FLH FLT

  • Fitment:1984-2008 Harley Davidson Touring FLH FLT models.
  • Saddlebag to Fender Support Bracket is laser and CNC formed,powder coated,solid and waterproof..
  • Can be used when removing rear bumper and rail on 80-08 FLT/FLHT models..
  • Installs easily using OEM hardware.Perfect replacement OEM bracket..
  • Package Including: 1 x Saddlebag to Fender Support Bracket..
Check Stock

ZXFOOG Front License Plate Mounting Kit- Front Bumper License Plate Bracket & Black Silicone Car Tag Frame, Universal No Drilling Hole Adapter for Vehicle/Truck/Trailer, Screws Caps, Rattle Proof Pad

  • ...cense plate, so they're legal to be on road and you will not be chased by traffic police. Comes in 1 set for the front bumper or back trunk of your car tag. 3 types of frames available: stainless steel, carbon fiber, silicone, Choose 1 to protect your license plate.
  • EASY TO INSTALL- We provide license plate mounting hardware, including stainless steel license plate screws and black screw caps. You can fasten your license plate easily without purchasing additional hardware. M6*20mm (1/4*3/4 inch) long screw bolts fix the plastic bracket on the car bumper, and M6 *12mm mechanical bolts are used to fix the license plate and frame on the bracket. The black license plate screw cap covers the screw head, which matches the silicone frame tidy and clean.
  • ANTI-CORROSION, ANTI-RUST, ANTI-SCRATCH- Mounting bracket is made of heavy duty black ABS plastic, the heavy duty frame is made of silicone, both corrosion, rust, weather proof. Silicone is soft and tough, will not scratch the car body, reduces the noise of license plate vibration. If the screws in our bracket frame kit are not suitable for your model, please feel free to contact us, we will send you replacement screws.
Check Stock

Evan-Fischer Front Bumper Cover Compatible with 2011-2017 Toyota Sienna Primed

  • Fitment: Upper Front Bumper Cover Support Bracket Mounting Cover Compatible with 2012-2014 Ford Focus Replacement for CP9Z17C897A, FO1065105, CP9Z-17C897-A..
  • Condition: New. Color: Black. Material: Plastic. Precisely engineered for an exact fit to your vehicle. Standard quality control procedure make sure the quality..
  • Feature: The bumper brackets support the bumper parts and locate them properly in relation to the body. Manufactured from top quality components, this is your best option replacement for your rebuild, repair, and maintenance needs..
  • Easy Installation: Direct Replacement. No modification required. An excellent replacement / accessory for your vehicle..
  • Package Included: 1 x Front Bumper Cover Support. **NOTE: Instruction is not included and no installation hardware..
Check Stock

Hull Hugr Marina Bumper Multiple Sizes,Docking Boat Bumpers

  • This heavy-duty commercial grade dock bumper is great for commercial marinas and personal docks.
  • Cover is crafted from high-quality UV and tear resistant vinyl and polyester tri-laminate and filled with high-density closed-cell foam.
  • Corrosion-proof stainless steel grommets are spaced along the full length of each bumper for secure mounting to the docks edge.
  • Dock bumper provides optimal protection from anything that could scratch, dent, or nick your boat.
  • Great for mounting to docks, posts and boats, this padded bumper measures 48 x 8 x 6-inches.
Check Stock