Reviews Dmr Hotspot For Sales

Yunseity Duplex Hotspot Board, 3.5Inch Screen MMDVM Duplex Hotspot Board with Cooling Fan, DMR Standard, Digital Display Hotspot Repeater with Antennas

  • APPLICABLE MODEL: MMDVM mini hotspot repeater board, duplex dual time slot design, mainly used for the built in extension board for Raspberry Pi 3B..
  • WITH COOLING FAN: The hotspot board has mini cooling fan for easy operation for long periods of time, and the acrylic case adds elegance to the product..
  • MEMORY CARD: Including 16G or 8G small memory card, the writing speed is not less than 10M, which has high efficiency and good durability..
  • GOOD PERFORMANCE: The digital hotspot board has the advantages of optimized wiring, perfect component layout, low heat generation, fast heat dissipation..
  • DMR STANDARD: All debugging parameters are carefully debugged according to the DMR standard, more stable in use and greatly improve the sound restoration..
Check Stock

All-New Duplex DMR Hotspot Ehternet Port Assembled Radio Station WiFi Voice Modem Support DMR Dstar YSF P25 Fusion Antenna Raspberry Pi Model 2B Two Colors OLED 2 TimeSlots

  • MMDVM hotspot supports D-STAR DMR YSF P25 NXDN POCSAG, enables the different mode of digital two way radio to communicate with each other (YSF2DMR / YSF2NXDN / YSF2P25 / DMR2YSF / DMR2NXDN) and works great with UHF..
  • Two Time Slots: Support receive in one Frequency and transfer in another frequency using Duplex mode.
  • Upgraded Network: support wifi wireless connection and wired connection to the router directly..
  • Power Supply: 5V, Mobile charger or a USB cable connected to your computer or laptop..
  • Best customer services: fully-assembled. The firmware is pre-loaded. Contact us if any question, we will reply within 6 hours. 73.
Check Stock

AURSINC MMDVM Hotspot USB HAT Board for Simplex & Dual Band Hotspot & Modem RPT Hat Support DMR DSTAR BlueDV | Compatible with Windows Linux Android System | BER, DMR, TX & TCXO offset | MicroUSB Port

  • Compatible with Raspberary Pi: Connect MMDVM hotspot USB hat to raspberry pi usb port and run pistar, select modem-USB to setup.
  • Wide Compatibility: AURSINC Hotspot radio board supports mmdvm_hs hat,mmdvm_hs dual hat and mmdvm modem rpt hat(oled display is not compatible for now).
  • Support Bluedv: USB Hat board supports bluedv windows, bluedv-android, bluedv-ios, bluedv-linux DSTAR | DSTAR,DMR,Fusion(YSF, FCS)(only DN mode).
  • Muliti Functions: MMDVM Board supports mmdvmhost/mmdvmcal on linux/windows to test the mmdvm hat BER/DMR/TX check TCXO offset | BER XX%.
  • MMDVM_HS Firmware: The mmdvm-hs hat supports the updated mmdvm_hs firmware running: linux: sudo stm32flash -v -w xxx.bin /dev/ttyAMA0 | windows: sudo stm32flash -v -w xxx.bin /dev/comx | com serial driver is ch340x.
Check Stock

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
  • If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual).
  • Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations).
Check Stock

Nicedea MMDVM Hotspot Board DMR P25 YSF DSTAR Board Compatible with Raspberry Pi 3 Raspberry Pi Zero W

  • The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network.
  • MMDVM Board is compatible with D-STAR, P25, DMR and work with UHF or VHF.
  • MMDVM Hotspot Board suits for Raspberry Pi 3,Raspberry Pi Zero W.
  • Power supply: Mobile charger or a USB cable connected to your computer or laptop.
  • All designs will be contributed on MMDVM open source project.
Check Stock

Radioddity GD-73A DMR/Analog Two Way Radio 2 Watts UHF Handheld Ham Radio for Beginners with Dual Time Slot, 3600mAh Battery, USB Rechargeable & Programming, Compact Long Range Walkie Talkie

  • 【Mini Size DMR】Compatible with MOTOTRBO, the GD-73A features lightweight and mini size that can easily fit your pocket. The clear LCD screen and compact keypad achieve a simple but effective one-hand radio operation, perfect for both business use and hams..
  • 【3600mAh Battery & Custom Keys】3600mAh large capacity battery supports 48 hours of standby time and up to 12 hours of continuous working time. You can assign 4 different functions (from a total of 21) to 2 customized keys to suit your needs..
  • 【Micro USB Connectivity & Hotspot Use】Comes with a micro-USB cable for both charging and programming. It is ideal for daily use and for use in combination with your personal hotspot..
  • 【In-depth User Guide】DMR requires a certain learning curve but with the very detailed user manual Radioddity provides, you can find it very easy to get a hold of this radio. Latest CPS & firmware is available from radioddity..
  • 【Updated Software & Firmware Support】Newest Firmware and software for new functions and bugs fixing can be free downloaded from radioddity. 18 months warranty and 60-day no-reason return guaranteed..
Check Stock

MMDVM Hotspot Spot Radio WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero 2 W with Latest Firmware V4.1.5 UHF VHF | Ethernet Cable | Supports C4FM YSF NXDN DSTAR P25 DMR

  • ...nt to change the working mode, you need to configure it as needed Working mode parameters) . SUPPORT: C4FM YSF NXDN DSTAR P25 DMR and default work with UHF.
  • [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes，go to pi-star/admin/configure.php.
  • [EASY SET UP] Preload sofeware Pi-Star on TF card, no need to download again. Radio Frequency: (UHF:430-440,VHF:144-146) This is upgraded version, do not need to set RXOFFSET and TXOFFSET, they're default 0.
  • [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network..
  • [NOTE] Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product manual or feel free to contact us, we will reply within 24 hours..
Check Stock

Duplex MMDVM Hotspot Radio Station P25 DMR Hotspot Antenna WiFi Digital Voice Modem Support YSF Raspberry Pi Zero

  • Suit for Raspberry Pi Zero W. Support:DMR,D-STAR, P25 and work with UHF in duplex mode. In Simplex mode support both Uhf and Vhf.
  • Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
  • Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network..
  • Support receive in one Frequency and tranfer in another Frequency..
  • Best customer service: feel free to contact us,we will reply soon within 24 hours..
Check Stock

Radioddity GD-AT10G DMR Handheld Ham Radio 10W Digital Analog Long Range (UHF Only) with GPS APRS, 3100mAh Rechargeable Battery, Work with Hotspot

  • 10W/5W/2.5W/1W Selectable: It is a powerful handheld radio with a compact design, featuring high-low quad-power selectable among 10W/5W/2.5W/1W and 20,0000 DMR contacts storage, allowing bulk import via software..
  • UHF Dual Mode Radio: You can switch between analog and digital (DMR Tier I & Tier II) operation modes at any time. Works well with hotspot, allows your radio to connect to a digital network like Brandmeister or DMR-MARC.
  • Talker Alias Function: This function, also known as In-band Caller Alias, will allow your pre-set text like your name or callsign displayed on all radios’ screen receiving the transmission, which is useful for radios which are shared between two or more users..
  • Large Battery & Crystal Sound: Come with a 3100mAh large battery, the Radioddity GD-AT10G support 14 hours of continuous working time and 90 hours of standby time. At the same time, it is with a crystal-clear audio sound when transmitting and receiving..
  • Our programming software for the Radioddity GD-AT10G has been successfully tested to run under Windows 11 as well..
Check Stock

AURSINC MMDVM Hotspot Spot Radio Station WiFi Digital Voice Modem Work Contained with Raspberry Pi Zero 2 W with Firmware V4.1.5 UHF Supports C4FM YSF POCSAG NXDN DSTAR P25 DMR

  • ...ion software, please DO NOT copy on the TF card directly, use a write in tool to write the software on TF card..
  • [WIFI SSID] Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.and WiFi will not work with WEP, make sure your WiFi Password Type is WPA. Power on the hotspot for 2 minutes to automatically connect to the network, or follow the instructions to connect the Hotspot to your router. After power on 2 minutes，goto http://pi-star/admin/configure.php.
  • [EASY CHARGING] Free micro USB charging cable included, charged with power bank or connect to laptop or computer. The Hotspot will also work mobile in your vehicle if you tether it to your mobile phone network..
  • [NOTE] If you encounter that the device cannot connect to network after setup, please email us, we will address your issue asap. Not compatible with Baofeng UV-5R, Baofeng RD-5R, 5X, 5R+, 5R Plus, etc UV series, BF series. More product setup guide, please read the product manual or contact us, we will reply within 24 hours..
Check Stock

All-New Duplex MMDVM Hotspot Assembled Radio Station WiFi Digital Voice Modem P25 DMR Hotspot Antenna Support YSF Raspberry Pi Zero Two Colors OLED Pie

  • Suit for Raspberry Pi Zero W. Support:DMR,D-STAR, P25 and work with UHF in duplex mode. In Simplex mode support both Uhf and Vhf.
  • Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
  • Support receive in one Frequency and transfer in another frequency..
  • Power Supply: Mobile charger or a USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network..
  • Best customer service: feel free to contact us,we will reply within 6 hours.
Check Stock

AnyTone AT-D878UV Dual Band DMR/Analog Radio with Free Training Course - $97 Value

  • "Great radio! If you are looking for a DMR handheld I highly recommend the D878UV. I bought mine with the hotspot bundle and it worked straight out of....
  • FREE course on BridgeCom University with step-by-step video tutorials ($97 value).
  • Repeater Check (Out-of-range checking for repeater).
  • FCC Part 90 Certified, FCC ID: T4KD878UV.
Check Stock

Hima MMDVM Hotspot Spot Radio Station+ Antenna + OLED with Screen Support P25 DMR YSF D-Star UHF Expansion Board WiFi Digital Voice Modem Suitable for Raspberry Pi-Zero W, Pi 3, Pi 3B+

  • The kit includes: high performance with screen ARM processor, SMA antenna connector, including antenna, 2 pins, 4 screws..
  • Support:D-STAR, P25, DMR and work with UHF.Software:Pi-Star,Suit for Raspberry Pi 3,Raspberry PI-Zero w, Raspberry Pi 3b+.The 40pin raspberry pie needs to insulate the middle 20pin pin headers for normal use..
  • Power supply: USB cable connected to your computer or laptop. The Hotspot will also work mobile in your vehicle if you Tether it to your mobile phone network..
  • Basic Setup: 433.550000MHZ DMR (Need the 2.4GHz SSID as the Pi W doesn't support 5.8GHz)..
  • Note: All designs will be contributed on MMDVM open source project.If you encounter a different version of pi zero not work, please see the picture instructions. If you have any difficult， please contact us to help you solve the problem..
Check Stock