Reviews Dlink Ac1wifi Router

D-Link Ethernet Switch, 8 Port Unmanaged Gigabit Metal Fanless Desktop Plug n Play (GO-SW-8GE)

  • Speeds Up to 10x Faster than 10/100 Ethernet.
  • Intelligent cable diagnostics for efficient troubleshooting..
  • Gigabit Ports for Incredible Wired Network Speeds.
Check Stock

D-Link Ethernet Switch, 5 Port Gigabit Unmanaged Metal Desktop Plug and Play Compact (DGS-105)

  • Inexpensive Gigabit Ethernet solution for Soho, small and medium businesses.
  • Supports IEEE 8021p QoS traffic prioritization.
  • Built to last: Rugged metal housing, fanless.
  • Speeds Up to 10x Faster than 10/100 Ethernet.
  • IEEE 802.1P QoS Support for Superior Traffic Prioritization.
  • Intelligent cable diagnostics for efficient troubleshooting.
Check Stock

D-Link Fast Ethernet Switch, 5 Port Unmanaged 10/100 Metal Fanless Desktop or Wall Mount Design (DES-105)

  • 802.1P quality of Service support for superior traffic prioritization.
  • Fast Ethernet solution for SOHO, small, and medium businesses.
  • Full/half duplex for Ethernet/fast Ethernet speeds.
Check Stock

Andrew Commscope CNT240 Coaxial Cable with MPD Digital RP-SMA Male to RPSMA Female Connectors WiFi Wireless Antenna Extension Cable 30ft

  • US Made Andrew CNT-240 is more flexible than Times Microwave Systems LMR-240 Coax and Offers SIGNIFICANTLY Less Signal Loss than RG-58 or other Cheaper Coax.
  • RP-SMA female and male coax cable connectors - Connect Most Wireless Routers including Asus, Dlink & Netgear Routers, Extends External Antennas from Wi-Fi routers to boost signals.
  • USA Made & Assembled Andrew Commscope CNT-240 Transmission Line Coaxial Cable with High Quality RPSMA Male and RP-SMA Female connectors.
  • Assembled by MPD Digital - a DoD Supplier - in our GA Facility using MILSPEC Components.
  • Ultra Low Loss: Impedance 50 Ohms Frequency Range DC ~ 6 GHz - RP-SMA Male & RPSMA Female Antenna Cables are designed for 2.4GHZ 802.11 Wireless Internet use.
Check Stock

O'skool Router Lift Systems for 3-1/2' Diameter Motors, 9-1/4'' x 11-3/4'' Plate

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use bar to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 1/20,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise centerlines....
Check Stock

Z-wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown (DWZWAVE2.5-ECO)

  • COMPATIBILITY: The Ecolink Door/Window is manufacturer tested to be compatible with the following ZWAVE Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V1, V2, V3. Vera Plus, Vera Edge, Vera Lite. Homeseer. Dlink staples connect. While it may work with your ZWAVE hub, Ecolink cannot guarantee it..
  • SIMPLE TO INSTALL: Easy installation by simply pulling the battery Tab to begin the Learning process. Natively compatible with SmartThings, it works with most brands of ZWAVE home security hubs. Features industry leading rare earth magnets that allow for up to a 5/8 inch sensor to magnet gap. Perfect for most door or window applications..
  • WHITE or BROWN housings INCLUDED: Both White or Brown plastic housing choice included to match any décor..
  • 3 YEARS BATTERY LIFE: Tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years..
  • Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing or home automation devices..
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • ...the corner of the template to be copied and place it on the desired corner of the wood. A complete set of professional tools, easy to use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radius router corner radius jig router corner radius template router corner template router radius guide router radius jig router round corner template router template routing corners routing jig templates corner radius jig router woodpeckers tools..
Check Stock

O'SKOOL Router Lift Systems for 3-1/2" Diameter Motors, 9-1/4'' x 11-3/4'' Plate 5-Piece Insert Ring Kit

  • Applicable Models : . Aluminum Router Plate Dimensions are 11-3/4" X 9-1/4" X 3/8"thick, 19.1(3/4”) Radius. Designed for routers with 3-1⁄2-in.-dia of body.(Please check the size of our Router Lift to make sure if it matches your router motor and router table .).
  • Suitable for a Variety of Router Tables: Use Cam wheels to adjust the gap between router table and router table top opening. Leveling screws can be adjusted the top and bottom flatness of the router plate and router table. The screws of oval mounting holes can be adjusted to suitable positions according to the locations of the router table style holes, then lock them in place..
  • Quick-cChange Router Bit : Use the router lift’s included crank handle to adjust the height of the router bit easily and precisely from above the table..
  • Rotate the hex hole of the micro-adjustment dial to lift or lower the carriage as needed to position the router bit, every full revolution of the adjusting crank moves the carriag and changes the height of the router bit by +- 0.05,” which is the distance change of a thread. So you can make exact bit height changes..
  • After adjusting the router lift to the needed height, lock the carriage to preventthe router motor from shifting while in use.There are precise cent....
Check Stock

Case Compatible with TP-Link AC750 Wireless Portable Nano Travel Router. for Hotspot WiFi Devices Storage Carrying Box Holder for Power Adapter, Ethernet Cable and Other Accessories (Bag Only)

  • Portable wifi router case fits for: For tp link router box is specially designed for TP-Link AC750 Wireless Portable Nano Travel Router (TL-WR902AC)-Support WiFi Router/ for Hotspot/ Bridge/ Range Extender/ Access Point/ Client Modes. Internet extender router case external dimensions: 5.51*3.38*1.77 inches. (Only wifi for hotspot router case, not including mobile for hotspot router).
  • Wifi for hotspot devices router holder with precise fixed groove: For tp link wifi extender router organizer case with two inner brackets inside the wireless bridge router bag are designed for the shape and size of the portable wifi for hotspot for travel and the power adapter. Wireless bridge router box can stabilize hot spots for wifi router and adapters to prevent them from falling. For muama ryoko portable wifi 4g router holder allows you to store portable Wi-Fi device more securely..
  • Wifi bridge router case with mesh pocket: There is a flexible mesh pocket inside the wireless router case. There is enough space to store the USB charging cable, WAN/LAN port cable, user manual and other accessories for hotspot router, so that all accessories are put together in an orderly manner to avoid loss/ damage and the flip will not close. The 360-degree hard and smooth zipper make....
Check Stock

POWERTEC 71536 Deluxe Router Table Fence System 3-3/8” Tall 24\ Long

  • Rockler’s Trim Routing Table: The Rockler professional router tables can quickly attach to the edge of a bench, a table, and a piece of plywood or any flat surface. Get more out of your compact router with a rugged, adjustable trim router table that goes anywhere!.
  • Compatibility: Our Router table Rockler is perfect for small applications such as routing round-overs, chamfers, and small dadoes in your shop or at the job site. The wood router tool table is perfect for providing better control of hand held routers..
  • Fits Most Popular Trim Routers: This router tables woodworking is compatible with Bosch Colt, Porter Cable 450 and 7310, DeWalt DW 611, and other popular trim routers – or drill the base to fit your specific router.
  • Easy To Use: Our table mount router sets up quickly, and it's just as easy to detach your router from the table without tools. Use your router tabletop with the included 1/4" thick acrylic base to do freehand work like a standard router..
  • What’s Included? This portable router table includes a high-visibility bit guard, ¼” thick x 5-3/4" diameter acrylic base, fence, T-Knobs let you make quick fence adjustments. This is one of the best router table accessories for your shop!.
Check Stock

4G LTE Dual TS9 External Antenna 7dBi Magnetic Base for Netgear Nighthawk M1 MR1100 Verizon Jetpack 8800L Mobile Hotpots Router MiFi Mobile AT&T T-Mobile Sprint Hotspot 4G LTE Router, Eifagur

  • Travel router case for netgear router: For nighthawk router case is designed for nighthawk 5g mobile for hotspot 5g router case is compatible with NETGEAR for Nighthawk M5 Mobile for Hotspot Router (MR5200), and for Nighthawk M1 M2 MR5100/ MR 2100/ MR1100/ M6Pro(MR6500)/ M6(MR6100) Mobile Router. Portable wifi holder keeps your precious hot spots for wifi router and accessories organizer and protected from drops. (Mobile for hotspot router case only, 5g wireless router not included).
  • For Hotspot wifi devices portable bag rugged and durable: For netgear for hotspot case is made of high-quality EVA material, which is splash-proof, shock-proof and scratch-proof, protects wifi 6 router organizer from damage caused by accidental collisions and scratches during transportation and friction, and ensures that when going out When 5g modem case is safe, for hotspot devices 5g router box prolongs the service life for nighthawk 5g..
  • Compact for att for hotspot router case: Internet router bag is equipped with elastic straps to fix routers for wireless internet, prevent your portable wifi device from accidentally falling, and keep for netgear for nighthawk m1 in good condition when traveling or outdoors. Mesh pocket with zipper can store 5g wifi for hotspot rou....
Check Stock

Router Bits 1/4 Shank, Router Bit Set 15 Pcs, Roundover Router Bit 1/4 Shank - Carbide Router Bits for Wood, Woodworking, DIY

  • ✎[Router Bit Set] - 100% brand new and good quality router bits 1/4 shank boasts alloy blade, balanced craftsmanship and a solid hardened steel board with anti kickback design ensures safe installation. Rigid router bits carbide are all have a hardened solid alloy steel construction with Build-up & heat resistant Teflon coating, Carbide Edge for durability and longevity. These wood router bits set can withstand some heavy duty use and the test of time.
  • ✎[Perfectly Matched Router Bits] - 1/4 shank router bits set precisely match the requirement of the American dimension and standard. Each router bit has a 1/4-inch universal shank which fits all models of routers, carbide router bits 1/4 shank is compatible with all major router instrument (either handheld or benchtop router table) such as MNA, Kowood, Bosch, DeWalt, Makita, Tooldo, Milwaukee, Porter & Cable, Skil, Ryobi, Black & Decker.
  • ✎[Great Value 15 Piece Router Bits Set] - Precisely machined sharp YG8 tungsten carbide blade makes clean and accurate cuts on all types of wood, Cutters (C3 Micro-grain Tungsten Carbide) to slice smoothly into stock, clean, splinter free, prominent advantages in practical use. Select bits featuring a bearing roller for smooth and aligned operations. Well-construct....
Check Stock

Rockler Double Featherboard

  • 4-Piece Wood Router Table Accessory Kit: Get a cleaner shop and safer, more consistent routing with this convenient Rockler router table accessory kit! Our 4-Piece Router Table Accessory Kit includes a dust port & 3 featherboards for more consistent cut quality and to help prevent kickback..
  • 3 Featherboards For Consistent Cut Quality: Two of the router featherboards mount to the fence, exerting pressure down toward the table, while the third mounts to the router table and keeps your work against the fence..
  • 2-1/2 Dust Port: Keep your router table clean and dust-free with our router dust port. This router fence dust port has a 2-1/2'' OD (2-1/4'' ID) hook-up..
  • Easy To Use: This miter slot featherboard can be quickly and easily connected to a miter slot openings of 3/8” deep x 3/4" wide or without the need for additional hardware..
  • What’s Included? Our 4-Piece router table accessory kit includes an easy-mount dust port, plus three featherboards for more consistent cut quality and to help prevent kickback..
Check Stock