Reviews Diy Voice Coil Wire

Pair of Pioneer TS-A300D4 12” Dual 4 Ohms Voice Coil Subwoofer - 1500 Watts (2 Subwoofer)

2 x BXW-124 4800 Watt 12' Subwoofer 4+4 Ohm DVC Pro Car Audio Bass

• Max Power: 2400W Per Woofer RMS Power: 1200W Per Woofer.
• Impedance: 4+4 Ohm Dual Voice Coil Voice Coil: 2.00" 4 Layer Voice Coil.
• 87.5dB EfficiencyOversaturated motor structure for increased magnetic strength 8mm top plate & vented t-yoke improves low-frequency dynamics.
• Nickel-plated spring-loaded compression wire terminals High-temperature tolerance adhesives resist thermal failure.
• poly-cotton suspension dampens violent accelerations stitched voice coil leads to prevent potential damage.

Power Acoustik BAMF-122 Bumper-122 Car Audio Subwoofer 3500 Watts with 12-Inch Dual Suspension (2 Pack)

• 6mm Top Plate & Vented T-Yoke Reduces Voice Coil Heat.
• 1.50” 4-Layer Voice Coil on Kapton Coil Former.
• Nickel-Plated Quick-Disconnect Wire Terminals.
• Injection Moulded Polypropylene Cone w/ Foam Surround.
• Stitched Voice Coil Leads Prevent Potential Damage.

Soundstream T5.104 Subwoofer

• Key components that you expect from T5 still remain.
• big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
• Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
• Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
• Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
• Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.

Sundown Audio X-8 Series Subwoofers 800W RMS X-8 V.3 D4 8 Subwoofer

• Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
• Black Aluminum 2.5” voice coil former for superior heat dissipation.

Rockville VS12K54 12" K5 1400w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm,Black

• ...t bass alignment. High quality aviation grade tweed carpet. Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub.
• Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire. The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire. 50 Oz High Quality Magnet. Cast Iron Basket With Black Sanded Finish.
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Blue Stitching Cone Reinforcement Ensures Long Life. Polypropylene Dustcap. Gold-Plated spring loaded push terminals. Impedance: Single 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation.
• Mounting Gasket with Rockville branding makes it easy to mount the subwoofer air-tight. High BL Magnetic Motor Gap. High grade black glue that handles extremely high temperat....

Sundown Audio X-8 Series Subwoofers 800W RMS/Subwoofer (Pair X-8 V.3 D2 8' Subwoofers)

• Black Aluminum 2.5” voice coil former for superior heat dissipation.
• Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
• High strength & patented cast aluminum frame.

SA-8 V.3 D2 - PAIR Sundown Audio 8' 500W Each RMS Dual 2-Ohm SA Subwoofer

• Xmax = 14mm one-way by 70% BL | RMS Power = 300-watts | Vented magnetic gap.
• Solid Pole piece with chamfered edges for increased air powered voice coil cooling | Black Aluminum 2” voice coil former for superior heat dissipation.
• High Temperature copper voice coil wire | Spring Loaded Terminals.
• Stitched-On Tinsel Leads to prevent fatigue and failure | High strength stamped steel frame.

JBL Professional JRX212 Portable 2-way Sound Reinforcement Loudspeaker System, 12-Inch

• JBL 12-Inch low frequency driver with a 2.5-Inch diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling..
• JBL 2414H-C 1-Inch polymer diaphragm compression driver improves high frequency performance as well as system reliability..
• The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region..
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating..
• Non-resonant, all-steel handles are used..
• Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
• Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage..

Power Acoustik BAMF-124 12 Inch 3500 Watt Max 1750 Watt RMS Car Audio Subwoofer Speaker with 3 Inch Dual Voice Coil and Vented T Yoke (2 Pack)

• 2 PACK OF POWERFUL SUBWOOFERS: 2 pack of 12-inch, 3500-watt subwoofer with an overcompensating motor structure for increased magnetic strength.
• IMPRESSIVE PERFORMANCE: 12-millimeter T-yoke and top plate improve low-frequency dynamics.
• 3-inch, 4-layer voice coil with direct connect wire increases power handling.
• PROTECTION FEATURES: Vented T-yoke and frame reduces voice coil heat build-up.
• High-temperature tolerance adhesives resist thermal failure.
• Stitched voice coil leads prevent potential damage.
• Non-transfer Spruce pulp cone with UV and chemical protection.
• DURABLE DESIGN: Non-magnetic, non-resonate die-cast aluminum frame is lightweight yet durable.
• Stitched and glued surround and cone joints for strongest bonding.
• INCLUDES: 2 1-piece gasket/trim Ring with concealed mounting holes included.

Shipenophy Replacement Horn Voice Coil Horn Accessories

• DIY High Pitch Horn Sound Voice Coil, be of excellent workmanship..
• This voice coil has a terminal post, which is convenient to connect..
• The high pitch is exquisite, transparent, clear and bright, and the high frequency is evenly distributed..

Soundstream 2000W Peak (1000W RMS) 12' Tarantula Dual 4-Ohm Car Subwoofer

• Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
• Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
• Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Accelerations.
• 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
• Mounting Depth: 7.25" | Optimum Sealed Box Volume: 1.50ft3 | Optimum Ported Box Volume: 2.50ft3.

Soundstream X5.15 Team 15' Tarantula 7500W Dual 1 Ohm Subwoofer Bass Speaker

• Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke and Top Plate Improve Low Frequency Dynamics | Vented T-Yoke and Frame Reduces Voice Coil Heat Build Up.
• Non-magnetic Non-resonate Die-Cast Aluminum Frame | 3" 4-Layer Voice Coil with Direct Connect Wire Increases Power Handling | High Temperature Tolerance Adhesives Resist Thermal Failure.
• Non-Transfer Spruce Pulp Cone with UV and Chemical Protection | Stitched and Glued Surround/Cone Joints for Strongest Bonding | Extended Excursion Polyether Foam Surround with UV and Chemical Protection | Dual Poly-Cotton Suspension Dampen Violent Accelerations.
• 1-pc Gasket / Trim Ring with Concealed Mounting Holes Included | RMS Power Handling: 1,000W | Max Power Handling: 2,000W | Voice Coil Impedance: 4-Ohm + -Ohm.
• Mounting Depth: 9.25" | Optimum Sealed Box Volume: 2.00ft3 | Optimum Ported Box Volume: 4.00ft3.