Reviews Diy Equipment

4Set 4 x AA Thicken Battery Holder with I Type Wired Battery Clip Standard Snap Connector

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4.DIY: Can get the voltage 6V, 12V,18V,24V dc power supply..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

MAKERELE Outdoor Electrical Box Weatherproof Includes Internal Mounting Panel 15.7'11.8'6.7' (400300170mm) Large Project Box for Electronics Hinged Cover Plastic Clip with 2 NPT 3/4” Glands

  • □PACKAGE CONTENT: 1 weatherproof electrical box , 1 mounting position, 4 wall bracket, 2 NPT cable glands..
  • □IP67 GRADE: Our electrical boxes are IP65 certified, which means Dust-tight and protected from moisture challenges up to jetting water, keep all your electrical equipment Safe & Dry. Plastic clip can keep good watertight, easy to open and close..
  • □SUPERIOR DURABLE: Our weatherproof junction boxes are made of high-quality ABS material which offers outstanding impact resistant and electrical insulation, keep your equipment well-protected in harsh environments..
  • □EASY FOR DIY: Our outdoor enclosures can be drilled and shaped easily without cracking, so it’s also suitable for your various DIY projects, with mounting position, can easily install kinds of equipment on it directly, save your time..
  • □WIDE APPLICATION: Ideal Choice for a Wide Range of Lawn & Garden Applications Including Holiday & Landscape Lights, Fountains, Power Tools and other DIY electronics projects..
Check Stock

QTEATAK 2pcs 9v Battery Holder with Switch and Lead Wires

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is very convenient to install and replace the battery, and it is not easy to damage other parts..
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

Pull Rod High Low Order Pull Bar Handle Stretch Rod Fitness Equipment Strength Training Accessories

  • ?Anti-rust?The Pull Rod is made of high-quality stainless steel, anti-corrosion, anti-rust, and strong carrying capacity..
  • ?Strength Training?Pull Rods can be used for arm strength exercises, enhance grip strength, and cultivate muscles around the elbows, back, abdominal muscles and shoulders..
  • ?Fitness Backup?The pull rod is very suitable for home exercise, and spare replacement in gyms and fitness clubs..
  • ?Stable Performance?The Pull Rod adopts professional manufacturing and processing, with stable performance and high reliability..
  • ?Fitness Equipment DIY?Trolley can be used for DIY fitness equipment, improve the equipment yourself, fitness is more interesting..
Check Stock

4 x 1.5V AA Batteries Battery Holder Wire Leads

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4. Battery Type: 6×4 AA batteries,Wire Length: 5.2"/13cm.
  • Cable Color: red and black.Case Dimensions:....
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

MRCOOL DIY 18k BTU 20 SEER Ductless Heat Pump Split System 3rd Generation - Energy Star 230v & Diversitech E Lite Plastic Equipment Pad for HVAC Systems, 18" x 38" x 3", Gray

  • Product 1: Country of origin : United States.
  • Product 1: Easy DIY installation: pre-charged R-410A 25ft quick connect line doesn't require special tools, equipment, or training.
  • Product 1: New SmartHVAC app: wifi control - compatible with Alexa and Google assistant - you can control your DIY anywhere with your Apple or android smart device and an Internet connection.
  • Product 1: Designed to efficiently heat and cool a single 750 Sq Ft room.
  • Product 2: PLASTIC EQUIPMENT PAD: Perfect mounting base for HVAC outdoor units and other outdoor equipment.
Check Stock

30 Phone Grip Holder with Double-Sided Sticker Phone Finger Expanding Stand Holder for Almost Phones Cases (Black, White)

  • ... Size and material: each blank phone holder has a diameter of 4 cm/ 1.58 inches, made of durable ABS plastic and strong adhesive which is a suitable size for decorating the phone and easy to be held in hand.
  • The holder ensure long service life and strong viscosity can help you grip the electronic equipment and DIY decorate firmly and prevent it from falling due to sliding.
  • Easy use: the foldable finger stand convenient and practical to use as cable winder, finger grip, table kickstand, car mount holder and so on.
  • It can be folded in 180 degrees to change angle.
  • Easily adjust your favorite viewing angles to play phones or watch videos.
  • Enjoy DIY: the blank phone holder is nice for DIY customization according to your own ideas to design and enjoy your own cell phone grip.
  • Widely use: the kickstand hand grip is suitable for most electronic equipment, but not compatible with non-flat surface.
Check Stock

QTEATAK 6 Pcs 2 x 3V CR2032 Button Coin Cell Battery Holder with Leads On Off Switch

  • 1. Suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery holder is snap-in design, no screws are needed.
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • Cable Length: approx. 15cm/5.9 inch.Fit Battery Model: 3V CR2032.....
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

QTEATAK 8 Pack 18650 Battery Holder Bundle with Wire 1 18650 Battery Holder 3.7V 2 Pcs 2 Battery Holder 7.4V 2 Pcs 3 Battery Holder 11.1V 2 Pcs 4 Battery Holder 14.8V 2 Pcs

  • 1. It is suitable for DIY and maintenance of all kinds of dc equipment, with screw hole at the bottom and wire preinstalled, it is easy to use..
  • 2. Easy to install: The battery is fixed by a stainless steel spring. It is very convenient to install and replace the battery, and it is not easy to....
  • 3. Tough material: using tough material, high strength, good toughness, not easy to crack..
  • 4.DIY: can be assembled by different size of battery box, can get the voltage 3.7V, 7.4V, 11.1V, 14.8V dc power supply..
  • 5.Applications: toys, electronic DIY, bread board power supply, LED lighting power supply, low voltage electrical equipment, remote control, radio,....
Check Stock

Heavy Duty Lightweight Aluminum Cable Pulleys with Hanging Strap Kit,Snatch Block Pulley Wheel for Home Gyms LAT Pulley System DIY Attachment Home Accessories(Blue)

  • 【UPGRADED PULLEY】Sumpley pulley is made of aluminum with a red coating on the surface,so the pulley is very quiet and smooth.Smooth sliding,double-sided silent bearing,no noise..
  • 【Premium Material】Made of aluminium alloy with great sturdy, anti-rust, wear-resistance and corrosion-resistant with highly strong structure.The best choice for fitness equipment and tools.
  • 【DIY Accessory】The package includes Heavy Duty Hanging Straps and Locking Carabiner.DIY Attachment for home gym LAT pulley system,home gym, lifting blocks, hoists, ladder lift, gym equipment, clothesline.
  • 【360 Degree Rotation】The top of the fitness pulley is equipped with a rotatable top ring, which can rotate 360 ​​degrees freely, and can prevent the rope/cable/wire rope from knotting to ensure safety.
  • 【Wide Application】Widely used in the pulling of wire ropes or other rope tools.DIY Home Projects,clothesline,shop lifts,fixed on gym machine.It can save your precious time and labor.
Check Stock

Single Pulley Block, Heavy Duty Silent Lifting Pullys, Wall/Ceiling Mount Pulleys, Fixed Mute Bearing Pulley Loading 300KG Home Gym Accessories for Lifting Weights, Hoists (1)

  • 【High Quality Material】This is a simple and practical roller in 10mm wheel diameter, made of durable hard stainless steel, super wear-resisting and anti-rust, strong and durable..
  • 【Silent Pulley】sturdy nylon sheaves with dual bearings, no noise and smooth, Maximum working load: 300 kg..
  • 【Effort-saving Design】The fixed pulley prevents the rope from twisting. The smooth roller ensures a good movement of the rope, effortless, cost-effective..
  • 【Self-made Fitness DIY Attachment】Fit for 3mm-10mm wire rope, climbing rope or twine, can work for for LAT Pulley System DIY Attachment Lifting Blocks,hoists,Ladder Lift, Gym Equipment, DIY Home Projects, Clothesline, Shop Lifts , gym Equipment..
  • 【Wide Application】Widely used in tractive effort of steel wire rope or other rope tools.
  • can be installed on walls, floors, ceilings, beams.
  • designed for use with rope or cord in indoor and outdoor applications to hang weight things or lighten load..
Check Stock

242193206 Refrigerator Door Gasket White Genuine Original Equipment Manufacturer OEM Part White

  • This part is compatible with models including.
  • Genuine Original Equipment Manufacturer (Oem) Part..
  • Door Gasket 241778307 Is An Original Equipment Manufacturer (Oem) Part That Fits Some Kenmore, Frigidaire, Electrolux And Crosley Bottom-Freezer....
Check Stock

Vibco BVS-250 Silent Pneumatic Turbine Vibrator, 480 lb. Force, 7200 VPM, 9 CFM, 60 to 80 psi, Threaded Exhaust, 5\ Bolt Pattern

  • [Application]: Permanent magnet DC motor can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
  • [Low Noise]: It drives up the super smooth, almost no noise.
  • [High Speed]: This motor features high speed 3500rpm and large torque.
  • [Feature]: The stator windings of the motor are copper wire, CW/CCW control.
  • Need for external direct current governor, it can achieve speed adjustment function.
  • [Application]: This permanent magnet DC motor is ideal for DIY generator.
  • Can be applied in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment.
Check Stock