Reviews Diy Electronic Kit

MiOYOOW Soldering Practice Kit LED Desk Lamp with Adjustable Brightness, DIY Electronic Soldering Project Kits Rechargeable Gooseneck Table Light for Learning Soldering or Daily Use

  • 【LED Table Lamp DIY Kit】The practical soldering kit are used to installed to a LED desk light. This soldering DIY kit help you to learn basic electronic knowledge and improve soldering ability, at the same time, you will own a LED desk lamp which has adjustable brightness, flexible gooseneck and can also be as mobile phone holder. A good choice for reading, studying and daily use. What could be more surprising than this Christmas present?.
  • 【Easy Assembly】: In addition to teaching basic mechanical and electronic principles, the table lamp soldering practice kit is easy to build and the principle is simple. The connection that was clearly mapped and labeled on the board. The solder practice kits are suitable for DIY electronics enthusiasts and can be used as school education practice kits. But please note, this soldering kit requires certain foundation of basic electronic theoretical knowledge and welding and hands-on ability..
  • 【Functions & Features】: This diy LED desk light bright enough at night. The brightness can be adjusted, equipped with flexible gooseneck, the desktop lamps enable you to have your light pointed in any direction. At the same time, you can also us it as a mobile phone holder. Built-in rechargeable battery, you can maneuv....
Check Stock

Socobeta DIY Digital Electronic Clock Kit with Temperature Prompt

  • 【WITH TEMPERATURE PROMPT】The DIY clock kit is equipped with temperature prompts, which is convenient for life, and the machine has a thermistor, which can let you know the changes in room temperature in time..
  • 【HIGH DROP RESISTANCE】The case of the LED clock kit is made of light-transmitting, exquisite acrylic material, with high transparency, high drop resistance and durability..
  • 【LED DISPLAY WITH LARGE FONT】DIY electronic clock kit The LED dot clock with large fonts conforms to the standard time, so you will always be on time. You deserve this DIY clock kit..
  • 【EASY INSTALLATION】The digital DIY electronic clock kit is simple to install and does not require particularly complicated operations. Therefore, you can use the clock kit with confidence..
  • 【NOT EASY TO DAMAGE】This clock kit adopts ergonomic design and stylish appearance. At the same time, it has a long service life, is not easily damaged, and can be used for a long time..
Check Stock

KOOKYE Robot Tank Car Kit Tank Chassis Platform Metal Stainless Steel 2DW Motor for Arduino / Raspberry Pi DIY (Silver Tank Chassis)

  • The KOOKYE robot tank platform is designed for learning robotics electronic car with arduino or raspberry pi programming. You can add robotic arm or robotics HD Camera on this robotic car platform for DIY..
  • The robotic tank car chassis contain extra-large size stainless steel car body and a variety of subplates for DIY. With 1 pairs drving wheels and 5 pairs carrying wheels, it make walk more easily on complex ground conditions..
  • This product only contains tank chassis.If you are an intermediate player and have time to read our code comments,you can buy the robotic car chassis platform andour tank electronic parts kit,then you can easily customize this robotic tank car to make your own project for science fair, college home work or even commercial applications..
  • The tank car chassis kit and the electronic parts kit can be purchase separately for your DIY.The electronic parts kit contains module parts including: Ultrasonic Sensor module, Tracking module, Infrared Remote Control, Bluetooth module and WiFi Expansion board etc. With these modules, the robot car can work in multiple modes such as auto-go, infrared control, obstacle avoidance, line tracking. You can use our Android APP to change working mode through Wifi or Bluetooth..
Check Stock

DIY Bluetooth Speaker Box Kit Portable Electronic Sound Amplifier Soldering Project DIY Kits with LED Home Stereo Speakers School Education Science Experiment and STEM Learning for Teens,Kids Adults

  • 【Bluetooth-compatible Amplifier DIY Kit】: The Soldering Project DIY Kits are used to installed to an electronic transparent stereo speaker with high-power speakers, LED flashing lights and transparent Acrylic shell. This Electronic DIY kit help you to learn basic electronic knowledge and circuit principles, and practice soldering skills enjoyably for you and your kids, or students, or DIYers..
  • 【Great Electronic Soldering Project】: Great project kit for soldering practice and also suitable for family education. Not only to improve your soldering skills, you will also will be more familiar with electronic components and learn more interesting electronics things. But please note,this soldering kit requires certain foundation of basic electronic theoretical knowledge and welding and hands-on ability..
  • 【Easy To Install】:The bluetooth module board is soldered and can be used directly after connection. You only need to solder the Led flashing light kit, connect the wires, and assemble the shell. Fun and entertaining, build your own bluetooth speaker by yourself, a cool project and challenging enough to be fun. About power: 5V mobile phone charger or computer power supply can be used, the sound quality will be better when the current of the power s....
Check Stock

MiOYOOW LED Lamp DIY Kit Soldering Practice Kit White LED Night Light Practical Soldering Kit DIY Electronics Kit for Beginners Students and DIYers 18 LED Lights

  • 【LED Light Controller Kit】: The electronic soldering DIY kit are used to installed to a white cute LED lamp which can be remotely controlled. You....
  • 【Easy to Assemble】: In addition to teaching basic mechanical and electronic principles, the led light controller kit is easy to build and the....
  • 【Functions & Features】: This diy small LED night light bright enough at night. Two levels of brightness can be adjusted, S2 switch is used for....
  • 【Great School Science Project】: DIY electric kit for soldering practice and also suitable for family education. Not only to improve your soldering....
  • 【Perfect After-Sale Service】: Any issues, please do not hesitate to contact us directly for further help. We have long been engaged in Electronics....
Check Stock

WHDTS 4-Digit Digital Clock Kits with PCB for Soldering Practice Learning Electronics with English Instructions

  • ⏰【Great School Science Project】: The DIY Clock Kits are used to installed to a 4-Digit Digital Electronic Clock. It is widely used in schools to help students learn basic mechanical and electronic skills. It's a great Science Fair project. Highly recommended to practice soldering skills enjoyably for you and your kids..
  • ⏰【Easy Assembly】: In addition to teaching basic mechanical and electronic principles, the clock kit is easy to build and is so simple. The connection that was clearly mapped and labeled on the board makes it easy to assemble. It's often used to teach basic soldering skills. It's a great first kit for any STEM student. No programming is required..
  • ⏰【Comprehensive Time Functions in Most Electronic Clocks】: Seconds Correction Function. Could switch to display the seconds or minutes interface independently. Accurate Travel Time--the error range ±1 sec every 24 hours. Hourly Chime Function--it supports hourly chime from 8:00 to 20:00 (The function can be turned on or off.). Two-way Alarm Clock--supports twice alarm clock setting. Power Cut Memory Function--the time is still accurate once power-on from power-off..
  • ⏰【Parameters】: This Electronic Clock Kit is equipped with STC11F02E master chip. DC5.5*2.1 power port with....
Check Stock

HPYNPES DIY Practical Soldering Practice Kit Practice Learning Electronics Training Board

  • Product introduction: Shake the lucky turntable by NE555 and CD4017 chips combined with LED random output function. The control terminals are button control and vibration switch control. You only need to press the button or shake it, the LED will start to rotate, and the After a while it stops randomly, leaving only one LED light..
  • Designed for Beginners：Special design for electronics starter to learn to solder electronics components. Soldering project kit will improve your electronic knowledge and soldering skills in practice.
  • Easy to Assemble： Electronic DIY kits uses safety materials, effectively avoid corrosion and wear out. Components’ names have been marked on the PCB board and the circuit design is simple. Even beginners can easily solder successfully.
  • Warm Reminder ：DIY electronic components kit requires buyer to assemble and welding, If you don't have any soldering experience, please read the soldering instructions and use soldering tools carefully to avoid safety problem.
Check Stock

Sunxeke 1535pcs Electronic Components DIY Assortment Part Kit,Include Resistors,Capacitors,Triode,LED,Circuit Board,Diode,Integrated Circuit,Jumper N-027

  • This high-quality kit contains the most common and frequently used electronic components..
  • It contains Resistors,Capacitors, Diodes, LED,Jumper,Circuit board,ELECT CAP. Total 8 different kinds components..
  • Each electronic component is packaged separately for your convenience..
  • The kit can be used to repair electrical appliances or diy items, etc..
  • Product content:1535pcs Electronic component kit.
Check Stock

FM Radio Kit DIY Soldering Project Practice Kit Auto-scan with Headphone Jack for Beginner Electronics SMD Welding Learning Teaching and Home Education by Etoput

  • DIY Electronic Kits - All components need to be soldered with a soldering iron, and DIY assembled into an FM AUTO SCAN RADIO (88-108MHz) KIT. SMD....
  • Functions & Features - Press the keys, you can adjust the volume of the radio broadcast and automatically search for nearby radio channels up and....
  • High Quality & Experience - Contains a clear graphic manual to introduce the soldering method of each component, a DIY electronics projects for....
  • Unique & Cute Design- Powered by 3 AAA batteries (not included), it can work continuously for up to 30 hours, suitable for outdoor use..
  • Learn to Solder Kit - Great for STEM project and electronic kits course appropriate for High School and University level curriculum. The best choice....
Check Stock

Hexidos 8x8x8 LED Cube Kit DIY Electronic Kit Soldering Project Kit User Needs to Solder The LED and The Displayed Content Can Be Modified MULTI4

  • [Great Science Kit] It's a 8x8x8 LED CUBE diy Electronic Kit, a great science kit, soldering project kit. Children will love it and stay away from....
  • [Gorgeous Display Effect] Buyers can solder it by themselves according to the installation instructions provided by us, and then plug in the 5V 1A USB....
  • [Structure] Its motherboard is soldered and tested. Buyers only need to solder 512 LEDs by themselves. The size after soldering is 18x18x21cm. There....
  • [Program modification] The motherboard has downloaded the program, and the user can run it after welding. Users can also modify the program by....
  • [Perfect After-Sale Service] This is DIY kits, not the end product! The Soldering Project requires basic electronic knowledge and hands-on ability.....
Check Stock

Soldering Practice Kit DIY Practical Electronic Circuit Project Resistor Learning Board

  • What is Ohm’s Law：Ohm's Law is a formula used to calculate the relationship between voltage, current and resistance in an electrical circuit..
  • Practice your soldering and learn electronics..
  • This Soldering Practice Kit is very simple，It is very suitable for children and electronic beginners to practice soldering..
  • DIY soldering kit is aimed to improve users' electronics knowledge and soldering skills and make your life better!.
  • The package is a DIY kit. It needs to be finished installing by yourself..
Check Stock

LDK Soldering Iron Kit Electric 60W 110V Adjustable Temperature Soldering Gun Welding Tools, 5pcs Replacement Tips and Solder Wire Tube (Basic)

  • [Upgraded] 60W 110V Adjustable Temperature Soldering Iron: Inner-heated ceramic technology makes the soldering kit heat up very quickly (within 2 minutes)..
  • 5 Pcs Iron Tips: Different shapes of tips make soldering iron easy to fit for guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories..
  • Easy to Use: No need soldering station, just plug and play.
  • adjust the temperature according to your need by the knob wheel on the electronic soldering iron..
  • Professional soldering iron suitable for basic DIY fixes. It would be very satisfactory for the typical electronics hobbyist, maker, tinkerer, or DIY repairs enthusiast..
  • Satisfaction Guarantee: Our soldering kit is backed by our manufacturer 90-day money back guarantee..
Check Stock

DIY Soldering Project Speaker Kit- MakerFocus Transparent 3W Power Sound Mini Bluetooth Amplifier Music Audio Box for Learner Students Adult Kids Beginner

  • ♫ [Excellent Stereo Sound] The DIY Bluetooth speaker kit uses upgraded 3w power speakers which provide high quality and stereo surround sound. Enjoy the wonderful music from your DIY results. Perfect for welding beginners who like music.
  • ♫ [Bluetooth & 3.5mm Audio Cable] DIY Bluetooth speaker provides two convenient ways to connect. You can connect Bluetooth through your phone to play songs. and connect 3.5mm dual-head audio cable by your cell phone.
  • ♫ [LED Light Design] DIY Electronic transparent stereo speaker with 5 LED lights (red, blue and green) is really fun and entertainment speaker box. It will shows the color of different lights with the change of music. for science education and STEM learning for beginners, childs, teens and adults.
  • ♫ [Adjustable Button] Give your DIY soldering practice kit more maneuverability. MakerFocus DIY speaker kit has adjust volume button, switch song button, connect Bluetooth button.
  • ♫ [Instructions & After-Sales Policy] Complete welding guide and 100% satisfactory after-sales service for every DIY enthusiast. Please download and read the user manual before installation (at the Product guides and documents on the Amazon product page).
Check Stock