Reviews Displacement Sensor

Articulated Sensor with Linear Position Sensor KPM12J-75mm

  • 【Good Quality】The cover shell of KPM12 rod sensor is aluminum, rod is stainles steel, PCB board with machine linear engraving. High precision linearity and repeatability..
  • 【Potentiometer Principle】 This sensor adopts potentiometer principle, output signal is 0-100% of input voltage while changes with displacement..
  • 【Plug & Use】The sensor is with Hessman plug, easy and convenient while using. This sensor can be fixed on machines..
  • 【Wide application】This displacement sensor is widely and common used in injection machine, wood machines, hydraulic machinery..
  • 【Safety】This product is covered with aluminum, rust resistance, long service life. High protection class IP67, good protected, it is workable when powered. Safe to use..
Check Stock

4000 mm Stroke Draw Wire Linear Displacement Sensor Transducer CWP-M4000 (0-10KOMH)

  • 【Good Quality】The cover shell of KPM12 rod sensor is aluminum, rod is stainles steel, PCB board with machine linear engraving. High precision linearity and repeatability..
  • 【Potentiometer Principle】 This sensor adopts potentiometer principle, output signal is 0-100% of input voltage while changes with displacement..
  • 【Plug & Use】The sensor is with Hessman plug, easy and convenient while using. This sensor can be fixed on machines..
  • 【Wide application】This displacement sensor is widely and common used in injection machine, wood machines, hydraulic machinery..
  • 【Safety】This product is covered with aluminum, rust resistance, long service life. High protection class IP67, good protected, it is workable when powered. Safe to use..
Check Stock

Injection Molding Electronic Ruler Pull Rod Displacement Sensor, IP67 Protection Level Stainless Steel Linear Position Sensor(KTC-100)

  • 【Good Performance】The displacement sensor supports high-definition sound quality, compatible with all devices, which has strict performance requirements through the precise processes of many experts..
  • 【Convenient】The electronic ruler adopts plug type, convenient and practical, no noise output, smooth engineering rod, resolution: Infinite uninterrupted analysis, repeatability: 0.01mm..
  • 【Feature】The injection molding electronic ruler adopts plug for Hessman to resist oxidation, corrosion, and durability, with exquisite workmanship, which can reduce signal transmission loss..
  • 【Potentiometer Principle】The sensor has high compatibility, adopts the potentiometer principle, and will change with displacement when the given input voltage is 0-100%, with stable performance and fast response..
  • 【Safety】The displacement sensor is made of stainless steel, not easy to rust, long service life, with the highest IP67 protection level, good protection effect, you are safe to use..
Check Stock

HT-1201 Digital Vibration Meter Vibrometer Acceleration Sensor Gauge Analyzer Tester for Vibration Speed Acceleration Displacement

  • 【Widely Used】Digital Vibration Meter Tester adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields..
  • 【Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement, press the probe against the measured objects perpendicularly..
  • 【Parameter Reference】Measurement range: acceleration: 0.1-199.9m / s2 (peak value), speed: 0.1-199.9mm / s (effective value), displacement: 0.001-1.999mm (effective value), measurement accuracy: ± (5 % + 2digits), temperature accuracy: ± 2 ℃, frequency range and other parameters have been listed in the description, please confirm the parameters before buying..
Check Stock

Handheld Digital Vibration Analyer Tester SW-65A Handheld Digital Vibration Meter Tester Measuring Machine

  • Vibration test is a crucial method of monitoring device condition and diagnosing malfunction.And it improves the production safety, product quality and production efficiency..
  • Acceleration measurement: 0.1-199.9m/s2(peak value).
  • Velocity measurement range: 0.1-199.9mm/s(real-time valid value).
  • Displacement measurement: 0.001-1.999mm(peak-peak value).
  • The application gets piezoelectric accelerated sensor which turns vibration signal into electrical signal, the device works by processing and analysing the input signal, and shows vibration acceleration, velocity, displacement value on screen..
  • It is used widely in machine manufacturing, electric power, metallurgy and vehicle manufacturing fields..
  • Your satisfaction is our priority. If there is any quality problem of our product or you are not happy with your purchase in our store, please kindly contact us and we are always ready to help..
Check Stock

WSDMAVIS 1 Pcs Rotary Encoder E6B2 CWZ6C E6B2-CWZ6C 1024P/R DC 5-24V for OMRON

  • Type: 2pcs 360 Degrees Rotary Encoder Module, Model: KY-040, Working Voltage: 5V, Pulse Count Per Circle: 20.
  • Purpose: The rotary encoder can count the quantity of output pulse in the positive and negative direction rotation. The rotation counting is unlimited..
  • An incremental encoder is a rotating sensor that converts rotation displacement into a series of digital pulse signals. These pulses are used to control angular displacement..
  • The reading system usually uses differential mode to compare two different waveforms, but the phase difference is 180 degrees, so as to improve the quality and stability of the output signal..
  • With the button on rotary encoder, it can be reset to the initial state, that starts counting from 0..
Check Stock

Extech 407860-NIST Heavy Duty Vibration Meter with NIST

  • Ranges - Acceleration: 200m/s2, Velocity: 200mm/s, Displacement: 2mm.
  • Remote vibration sensor with magnetic adapter on 39"(1m) cable.
  • Record mode stores the maximum and minimum values for later recall.
  • Resolution to 0.5m/s2, 0.5mm/s and 0.005mm.
Check Stock

Extech 407860 Heavy Duty Vibration Meter, 39 Inch

  • Selectable units of in/s or mm/s for velocity, ft/s or m/s for acceleration, and in or mm for displacement.
  • Remote vibration sensor on 39 inch (2 meter) cable.
Check Stock

Vibration Meter - Digital Precision Split Type Meter Tester HT-1201 Sensor Gauge with LCD Backlight Analyzer Acceleration Velocity Displacement Measurement for Moving Mach

  • ...ester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement. - salinr.
  • 【Widely Used】The product adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields. - vibration meter.
  • 【Vibration Meter Tester】This Digital Precision Split Type Vibration Meter Tester adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, It can measure the vibration speed, acceleration, displacement.Automatic power-off time: 4 minutes.Vibration acquisition: piezoceramic accelerometer (shearing type ) - vibration meters.
  • 【Easy to Used】The backlight starts automatically after power on. Hold down “Enter” key to turn on/off the b....
Check Stock

TR-Y-SRT-6200S Separate Surface Roughness Tester Meter LCD Dispaly Profilometer Ra Rz Rq Rt Roughnss Gauge

  • Optional accessories:003cbr003e1. RS232 Data Cable with software003cbr003e2. Bluetooth Data Adapter with software003cbr003e003cb003eIf you need, please feel free to contact me. Thank you.003c/b003e.
  • Applications: Widely used in production site to measure surface roughness of various machinery-processed parts, calculate correspondingparameters according to selected measuring conditions and clearly display all measurement parameters..
  • Be compatible with four standards of ISO, DIN, ANSI and JIS. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism inside the tester. The sensor gets the surface roughness by the sharp built-in probe..
  • This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD..
  • Multiple parameter measurement: Ra, Rz, Rq, Rt. Highly sophisticated inductance sensor..
Check Stock

Raymarine EV-100 p70 Wheel Pilot Pack Gray Large T70152

  • Designed for smaller wheel steered sailboats with maximum vessel displacement: 16,000 lbs..
  • Precision monitoring of heading, pitch, roll and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change.
  • The autopilot automatically evolves and adapts to your vessels steering characteristics without any user adjustments.
  • Waterproof housing allows for installation above or below deck.
  • Wheel Pilot Pack Includes: EV1 - Sensor Core, ACU-100 Actuator Control Unit, p70 control head, wheel drive, evolution cable kit.
Check Stock

AMTAST Digital Vibration Meter Vibrometer Handheld Vibration Analysis Equipment Acceleration Velocity Displacement Measurement for Moving Machinery

  • Use hi-sense of vibration sensor, measuring accurately..
  • Double measurement button for meeting level or vertical measurement requirements..
  • LCD color display with screen flip function, easier to read the result of acceleration, velocity and displacement in different directions..
  • Magnetic probe with spiral interface, easy to install and remove, fit various measurement condition..
  • Auto shut down according to the time set before, avoiding unnecessary waste electricity..
Check Stock

Lindy LPTKS42 Perch Talker Jig, Small

  • Beads and disk provide flash, sound and water displacement for maximum fish attraction.
  • Dropper chain separates hook from lure to catch more fish in neutral or negative moods.
  • A variety of proven fish catching color combinations.
  • When vertically jigged this lure creates flashes, sound and water displacement stimulating the fish's lateral line attracting Perch, Crappies, Walleye, Trout, Whitefish and more from great distances.
Check Stock