Reviews Disconnect Coupling

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Fuel Lines and AC Disconnect Plier Tool 37300

  • 37300 Fuel line and AC Disconnect Pliers tool ，a unique design providing extra leverage when disconnecting quick connect coupling air conditioning....
  • Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the 37000 or 39400 disconnect tool sets.
  • Material：Made of high quality Solid steel with plastic handle, soft and comfortable..
  • The pliers can also be used to reconnect stubborn lines or connections that are in hard-to-reach areas.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

LKONWEE 37300 Fuel and AC Line Disconnect Plier, Fuel Line Connector Removal Tool for Replacing Fuel Filters

  • Use with 5/16 inches, 3/8 inches or 1/2 inches adapters from the Lisle 37000 or 39400 disconnect tool sets.
  • Also works with other fuel and ac line disconnect tools Red rubber handles.
  • Features a unique design providing extra leverage when disconnecting quick connect coupling air conditioning and fuel lines.
  • Premium Solid steel material construction offers strength and durability ,plastic handle, soft and comfortable..
  • The pliers' forks have different sized openings so the tool can be turned around to fit single or two step collar designed connector lines..
Check Stock

REGNHLIF 2 Pack 3/4

  • Hose To Hose Connector, Coupling Description Double Female, Connection 3/4″, Aluminum material make it strongest construction for prolonged service life.
  • Standard 3/4″ Garden Hose Fits All Garden Hose, Watering Devices.
  • Easy to use and reliable, Very convenient to install with garden hose connecter.
  • Made with precision process, no leaking and durable, easy to connect and disconnect.
  • Package include 2 pcs 3/4inch Double Female garden hose connector.
Check Stock

Rego 7141M Quick Disconnect Service Check Valve Connector, 3/8

  • Quick disconnect coupling for the LPG cylinder.
  • Item Package Dimension: 3.0" L x 2.0" W x 2.0" H.
Check Stock

GQF Cabinet Incubator Water Reserve System

  • with quick disconnect coupling and constant level humidity pan with 2 humidity pads.
Check Stock

3 Embers ACC6000AF Natural Gas Conversion Kit Violet

  • Converts your 3 Embers dual fuel grill to natural gas.
  • Tools needed for installation not included: two adjustable wrenches, phillips screwdriver, pipe-thread sealant.
  • Converts these 3 Embers Grill Models - GAS7480AS & GAS7480BS.
  • Check grill owners Manual for conversion instructions.
Check Stock

DCT 4in Plastic Pipe Threaded Quick Connect Adaptor Coupler 1-Pack, Flexible Hose Woodshop Saw Dust Collection

  • ...complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded quick connect adaptor end screws tightly into flexible hose and tapered end offers press-on attachment.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to quick connect thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • 1/8-inch (3mm) quick adaptor coupling thickness.
  • 4.5-inch (11.4cm) quick adaptor coupling length.
  • Fits snugly on dust ports for table saw, planer,....
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • ...ieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
  • Fits snugly on dust ports for table saw, planer, jointer, and more.
Check Stock

HangTon HE29 Electrical Circular Industrial Waterproof Connector 12-15mm Cable Plug (14 pin)

  • Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
  • Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
  • Waterproof IP68, threaded coupling, quick disconnect, solder male female cable plug.
Check Stock

HangTon HE29 Circular Panel Mount Connector Power Waterproof IP68 Aviation Plug Socket (14 pin)

  • Cable Range: 12-15mm, Wire Size: ≤2mm² or 14AWG, Contact Diameter: Φ1.8mm.
  • Rated Voltage/Current : AC 380V/10A, Resistance: 2mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
  • Waterproof IP68, threaded coupling, panel mount, quick disconnect, solder plug & socket.
Check Stock

AMPHENOL INDUSTRIAL MS3106A14S-6S Circular Connector Plug, Size 14S, 6POS, Cable

  • Cable outer diameter range: 12-15mm, Wire Size: ≤4mm² or 11AWG, Contact Diameter: Φ2.8mm.
  • Rated Voltage/Current : AC 380V/25A, Resistance: 1mΩ.
  • Protected against solids & liquids, provide a secure and reliable connection in the harsh environment..
  • Waterproof IP68, plastic shell, threaded coupling, panel mount, quick disconnect, solder, angled cable plug & panel mount socket.
Check Stock