Reviews Direction Control Valves

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

6V Water Liquid Peristaltic Pump Constant Flow Hose Drip Metering Pump Lab Mini Dosing Pump for Flow Rate Controlled(Green)

  • 【Variable Direction】The delivery direction of the experimental liquid distribution pump is variable, you can control the flow direction through the positive and negative connections.
  • 【Removable Pump Head】The pump head can be removed with a single push, which is very convenient for pump tube replacement and cleaning,Working Environment: Temperature 0-40℃, Relative Humidity 003c80%,Flow Rate: 003e 35ml / min-----Optional Color: White, Yellow, Blue, Green.
  • 【Elaborate Design】Our quantitative delivery pump adopts the design without screw clasp, and there are no valves and seals on the top, which is easier to disassemble and maintain, and it is convenient to replace the tube head.
  • 【Widely Used】These small metering pumps have self-priming function and can be widely used in experiments, biochemical analysis, pharmaceuticals, fine chemicals, and biotechnology fields.
  • 【Quantitative Delivery Pump】Our peristaltic pump is to make the fluid in the hose move in a certain direction by repeatedly compressing the elastic tube. The replaceable tube head can adapt to the transportation of different media, which is convenient for multiple types of work.
Check Stock

DAN SPEED S316 Stainless Steel Vertical Check Valve,Spring Loaded In-line Low Cracking Pressure 2 inch

  • Body Material:Stainless Steel SUS/SS316,Cracking Pressure:4.5 psi.
  • Working Temperature:-51°C to 232°C (-60°F to 450°F),Seals:NBR.
  • Max Pressure:1000 Psi For Water,Oil,Gas (WOG1000),Port Types:BSPP Female x BSPP Female.
  • Vertical check valves may be used for any application. They utilize a spring system which shuts the Disc closed when there is not enough pressure to hold it open by the operating fluid. Fluid pressure in the backwards direction will cause the valve to close to prevent backflow.
  • Check valves are used to help direct flow in one direction.The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols.
Check Stock

briidea Pool Check Valve 2 inch for Swimming Pool Pond Spa Replacement Kit

  • DURABLE MATERIAL: Check valves for 2'' plumbing have excellent flow characteristics, constructed of durable ABS+PVC material, anti- corrosion, provides a lifetime of superior performance.
  • EASY INSTALLATION: Installed at the pump outle, prevent water bckflow from damaging pump impeller, or pollution filtration equipment.
  • TRANSPARENT AND VISIBLE: Clear lid with red seal for easy inspection. The inside of the valves can be easily monitored and problems resolved easier if there is a valve problem. Easy to clean.
  • WIDE APPLICATION: Suitable for swiming pool, pond, spa sauna pool and bathing pool. High reliability, a practical accessory using in swimming pool. NOTE: The direction of the marking arrow of the valve must be consistent with the direction of water flow.
  • PRODUCT GUARANTEE: You can enjoy our first-class service with free refund without reason, 2-year warranty and 24-hour support for customer service.
Check Stock

Garden Hose Splitter 2 Way - Heavy Duty Solid Brass Hose Y Splitter，Hose Faucet Splitter,3/4\ Brass Hose Adapter Connectors Shut Off Valve, Hose Spigot Adapter 2 Valves, Plus 4 Extra Rubber Washers.

  • Easy to connect Garden Hose Splitter ：This water hose splitter allows two 3/4’’ hose tap connectors to be connected without the need of tools, easily accommodate all standard hoses.The 360°rotatable top connector adds convenience for both installation and adjusting hoses to a desired direction,with standard 3/4 inch male threaded swivel connection, working perfectly with any 3/4" garden hose thread spigot or hose connection..
  • Adjustable Water Flow Control : 2-way garden hose connectors are equipped with high-quality ball valves.Just adjust the brass handle to use it as a garden hose pressure regulator, easily taking care of plants, showering pets, washing car, cleaning house and more situations without switching hoses frequently.Made for home, garden and backyard use..
  • Good Service : If you are looking for a high-quality garden hose splitter, this one is a top recommendation.This 3/4" hose splitter fits for all standard faucet and garden hose ( please make sure your matched parts is garden hose thread) .If you encounter any problems during the purchase and use, please contact us immediately.
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock

Lisle 22920 8 mm Low Profile Jiffy-Tite Disconnect Tool

  • Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more.
  • Smallest size also works on automatic adjusting air suspension systems for automobiles.
  • Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment.
  • Also disconnects other quick connect push-in fittings, including: flow control valves, check valves, shuttle valves, quick exhaust valves and other function control fittings in compressed air systems.
  • Each tool is double-ended to disconnect air lines even in hard-to-reach areas, angled end allows maximum leverage, smaller end fits in tight spots.
  • Set comes with five popular sizes: 1/8"-5/32.
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Moen U362CIS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with CC/IPS Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

Moen U362XS M-CORE 3-Series Mixing 3 or 6 Function Integrated Transfer Valve with Crimp Ring PEX Connections and Stops, or Unfinished

  • USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • FUNCTIONS: When using 2 showering devices, the valve has 2 independent and 1 shared functions.
  • When using 3 showering devices, the valve has 3 independent and 3 shared functions.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with new 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • VERSATILE DESIGN: M-CORE’S adaptability allows the valves to be roughed in with the option of functionality and style changes that don't require removing or changing the valve(s).
Check Stock