Reviews Direct Drive Compressors

DeWalt DXCM201 20 Gal. 200 Psi Oil LUBED Belt Drive Electric Air Compressor

  • 200 maximum PSI provides 53% longer air tool run time vs. 20 gallon 155 PSI belt drive air compressors.
  • 6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools.
  • Precision Automotive style pistons for greatly improved balance and durability.
  • 78 dba operational noise level for a quieter work environment than direct drive oil free compressors.
  • High flow regulator and coupler provide maximum air flow to air tools.
  • 10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site.
  • High efficiency aluminum Flywheel provides maximum air flow and lower start-up amps.
  • Aluminum head and valve plate to maximize heat dissipation.
  • Superior O-RING seals to eliminate oil leaks.
Check Stock

DeWalt® 26 Gallon 1. 5HP 150 PSI Vertical Portable Electric Ultra Quiet Air Compressor (DXCMSAC426AMZ)

  • 69 dBA quiet brings less noise to your work environment.
  • 80% quieter compared to other 20 Gal. 150 PSI oil free compressors.
  • Up to 4X the life versus other 20 Gallon 150 PSI oil free compressors.
  • Oil free pump that is maintenance free pairs perfectly with a heavy-duty, direct drive induction motor.
  • Conveniently located control panel puts your gauges, regulator and quick connect right at your fingertips with a roll cage designed to protect all of the vital components.
  • 10 in. heavy-duty pneumatic wheels for maximum portability around the shop or jobsite.
Check Stock

Regenerative Blower, 0.37 HP, 42 CFM

  • Performance: Max Flow: 155 CFM Max Pressure: 166 "H20 Max Vacuum: 161 "H20.
  • Specifications: Inlet/Outlet Diameter: 2.00" Voltage/Phase: 220-275/380-480 Three Phase Horsepower: 5.00 Decibels: 74.
  • Direct Drive TEFC - Premium Efficiency, Inverter/Continuous Duty Motor - Anti-Sparking, Corrosion Resistant Aluminum Housing.
  • Extremely low maintenance - Bearing replacement every 40,000 hours of use @ 68?F with no need to relubricate - that’s it!.
  • Regenerative Blowers are far more energy efficient than Air Compressors making them an excellent alternative that could save you thousands on your electricity bill..
Check Stock

AIR-326: 5.00HP Three Phase 230/460VAC - REGENERATIVE BLOWER: Max Flow: 155CFM, Max Press: +166\H20, Max Vac: -161\H20, 2.00\ Threaded NPT Connections

  • Performance: Max Flow: 1519 CFM Max Pressure: 88 "H20 Max Vacuum: 108 "H20.
  • Specifications: Inlet/Outlet Diameter: 5.00" Voltage/Phase: 220-275/380-480 Three Phase Horsepower: 40.00 Decibels: 84.
  • Direct Drive TEFC - Premium Efficiency, Inverter/Continuous Duty Motor - Anti-Sparking, Corrosion Resistant Aluminum Housing.
  • Extremely low maintenance - Bearing replacement every 40,000 hours of use @ 68?F with no need to relubricate - that’s it!.
  • Regenerative Blowers are far more energy efficient than Air Compressors making them an excellent alternative that could save you thousands on your electricity bill..
Check Stock

Hayden Automotive 5980 Idler and Belt Tensioner Pulley

  • These pulleys assist in belt routing and tensioning within the accessory drive system. Air conditioning compressors, alternators, power steering pumps, and water pumps are aided by the function of Idler Pulleys. All Idler Pulleys are of the highest quality and meet or exceed OE specifications..
  • Extends belt and accessory drive bearing life.
Check Stock

3 Pack PJ373 Replacement Belt for Husky Air Compressors H1504ST A700062 Pumps

  • Husky Air Pump Compressors Drive Belt PJ373 AB-90753.
  • Fits Models: H1504ST, A700062 Pump, OL197.
  • Size: Approx 5.1 x 0.3inch ( 13 x 0.7cm ) (D x W).
  • New Replacement Rubber drive Belt. Get your compressor back up and running.
Check Stock

285753A 285140, 280152, 285743, 285753, 285753AVP, 62672, 62693, 80008 3364003 3364002 AP3963893 Washer Motor Coupler, Motor Coupling Kit, Replacement for Maytag Kenmore Washing Machine

  • [285753A Packing Include] You will get 1Set 285753A Washer Direct Drive Motor Coupling..
  • [Part Number]280152, 285140, 285743, 285753, 285753A, 285753AVP, 21003, 62672, 62693, 80008, 661560, 3352470, 3363664, 1195967, AP3963893, PS1485646, EAP1485646, etc..
  • [285140 Compatible] Replacement for Kenmore, Crosley, Roper, Admiral, Amana, Estate, Inglis, etc., and Other Major Brands..
  • [Washer Direct Drive Motor Coupling Premium Quality] Our Washer Direct Drive Motor Coupling Made from heavy-duty plastic, It meets or exceeds all original manufacturer specifications for fit and performance..
  • [Service Gurantee] This Washer Direct Drive Motor Coupling comes complete with a 12-Month warranty. Our department Usually does a 100% quality inspection on the Washer Direct Drive Motor Coupling before delivery. We will refund if the Washer Direct Drive Motor Coupling is defective. If you have any problems, feel free to contact us..
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

Craftsman C3 19.2 Volt 18 Gauge Brad Nailer Combo Kit with Battery and Charger (Bulk Packaged, NO Retail Packaging)

  • Eliminates need for compressors or hoses.
  • Tool-less depth-of-drive adjustment for proper setting of nails.
  • Dry Fire Lockout extends tool life and prevents misfires.
  • Adjustable drive allows you to switch between single sequential and contact actuation modes.
  • Included components: Nailer, Battery, Charger.
Check Stock

Official Creality Sprite Direct Drive Extruder Pro Kit with 80N Stepper Motor Direct Drive Upgrade Kit for Ender 3 Ender3v2 Ender 3 pro Ender 3 Max Support 1.75MM Filament

  • Compatible With Ender3 Series - Creality Spirit direct drive extruder upgrade kit compatible with Ender 3, Ender3v2, Ender 3 pro and Ender 3 Max..
  • All Metal Design - With Compact and light weight design, 54x50x64.3mm small size, 288g weight. Creality Spirit direct drive extruder pro kit perfectly....
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N....
  • Dual Gear Feeding, More Stable Printing -The Creality Sprite direct drive extruder adapt double-toothed structure which does not damage filaments,....
  • Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C all metal hotend kit, the Spirit direct drive....
Check Stock

Dayco 89338 Automatic Tensioner Assembly

  • ...25 Accessory Drive Belt Tensioner Assembly replaces Duralast 305625, Gates 38357, ACDelco 38357, CARQUEST 38357, NAPA 38357, Ford 3M5Z-6A228-AE, Goodyear 49397, Motorcraft BT-107, Mazda.
  • REDUCE VIBRATIONS: Between smooth belt routing and accurate tensioning, the tensioner assembly assists in vehicle air conditioning compressors, alternators, power steering pumps, water pumps, and other various engine accessories that are critical to vehicle performance. This heavy-duty, wear-resistant Drive Belt Tensioner Assembly is an exact OE replacement designed to reduce wear, friction, vibration, and harshness.
  • EXTEND SERVICE LIFE: These assemblies feature smoother surfaces and tighter dimensional tolerances to prolong belt life. Lubricated bearings and high temperature seals assure peak performance. Built to last, this Tensioner Assembly has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
  • RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, serpentine belts, drive belts, belt tensio....
Check Stock

Craftsman C3 19.2 Volt 18 Gauge Brad Nailer Combo Kit with 2 Batteries and a Charger (Bulk Packaged) 315.FS2000/42980

  • This is a Genuine Craftsman product that will arrive out of retail packaging for shipping purposes. (Bulk Packaged, No Retail Packaging).
  • Eliminates need for compressors or hoses.
  • Tool-less depth-of-drive adjustment for proper setting of nails.
  • Dry Fire Lockout extends tool life and prevents misfires.
  • Adjustable drive allows you to switch between single sequential and contact actuation modes.
  • Included components: Nailer, (2) Batteries, Charger.
Check Stock

Wolo (MCHWK-2) Air Horn Wiring Kit

  • Makes installation of any direct drive air horn (no tank) easy, trouble free and professional, without any special tools.
  • The kit is designed to easily hook-up a direct drive air horn to the vehicles factory horn system.
  • Included in the kit is all that is required to install a direct drive air horn.
  • wire harness with quick connect plug for the relay, terminals, in-line fuse, plastic wire ties and easy to follow instructions in English / Spanish.
  • Ideal for any 12-volt car, motorcycle, truck, etc.
Check Stock