Reviews Direct Coil- BestItemr.com

MSD 8224 Blaster Ignition Coil

Bolt on direct connect coil with improved materials for stronger output.
Two tower DIS coil pack is a direct replacement used on GM vehicles from mid 80's to late 90's.
Installation of an MSD DIS ignition use interface module part number 8870.

The coil is a direct replacement of the stock coil and offers increased spark energy when used with the MSD HEI module, PN 83647.
The coil features special low-inductance, high-temperature windings which charge faster to give you increased spark energy at high RPM.
OBD II and CARB approved and legal for use in all states.
Coil mounts directly in place of factory style with improved performance.

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″, Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..

Our Jeep Wrangler TJ heavy duty rear frame coil spring brackets are direct replacements for your factory mounts..
If you have rusted brackets, damaged brackets, or are looking to use TJ coil springs on your next project this is the bracket you need..
This coil spring mount is designed to go in the same location as your factory bracket..
The brackets are manufactured from 1/4" steel, shipped bare, welding required, and are sold in pairs..
Applications: 1997-2006 Jeep TJ Wrangler.

Key components that you expect from T5 still remain.
big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..

Replacement Inboard Marine Engine Ignition Coil - The ignition coils or ignition coil plug provides spark for your engine. Over time the factory....
Compatible Replacement for Mercruiser GM V6, V8 308 & 350 Engine With Thunderbolt IV & V Ignition System - Only works with HEI (High Energy Ignition)....
Replaces Part# 18-5438, 392-805570A2, 392-7803A4, 392-805570A1, 72115, 40511, 9-29701, 64570, RL5438. The ignition coil of your boat can easily be....
OEM Fit, Quality, Finish - While this is not a genuine part, it is a direct replacement for your boat or boat engine and it will appear, fit and work....
2 years or 24,000 Mile Warranty - This ignition coil pack comes complete with a 2 year or 24, 000 mile warranty. If the coil ever fails on your boat....

Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″. Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..

Features: MJME8D1 Dual Mini Mojo 8″ Loaded Enclosure, Piano black gloss finished front panel, Carpet wrapped enclosure, 4-layer wound copper voice coil, Fiberglass reinforced subwoofer cone, Stitched foam surround, Heat dissipating aluminum heat sink, DVVC Direct Vent Voice Coil Cooling, Ported Enclosure, All Mojo Mini Enclosures are @ 1Ω.
Specifications: RMS: 1800W, PEAK: 3200W, Dimensions: (W) 33.5″ (H) 14.6″ (TOP D) 15.25″ (BOTTOM D) 17.75″.

Insta-Seal Direct Inject for 1-1/2 Ton to 5 Ton Applications.
Concentrated formula means less material in system, Clear tube so you can see the sealant go in. Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. Designed for one time use..
Optional Direct Inject Tool Sold Separately [IMAGES SHOWN ARE FOR REPRESENTATION ONLY].
Before you have your coil condemned and spend thousands replacing your system...Watch our video to see how easy InstaSeal Direct Inject is to use!.
Replaces / Supersedes: Super Seal Flex Inject # 985 , Nu-Calgon EasySeal Direct Inject # 4050-08 , Replaces A/C Leak Freeze & A/C Leak Freeze with Magic Frost , Enviro-Safe Direct Inject , Sensible , Nu-Calgon 4050-07 , 405007 , Xantus Products XL4 # 20-101 , Vapco Express Seal and more..