Reviews Diode Module

DC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube

• 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
• Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
• High Reliability Material: This dot diode module is made of durable copper shell for long life..
• Continuous output: This dot diode module supports continuous output and can be used for a long time..
• Application: This dot diode module is designed for engraving machine, cutter and so on..

Fast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module

• FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
• AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
• STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
• AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
• SPECIFICATION: ​Forward Average Current IF (AV): 200A.
• One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.

Quarton Laser Module VLM-650-03 LPA (ECONOMICAL DOT Laser)

Baluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle

• TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
• Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..

IR LED Diode Lasers 808nm 500mW 5.6mm TO-18 Infrared Laser Diode with Pd LD

5pcs 405nm Violet/Blue 5mW Laser Diode 5.6mm TO-18 LD for DIY Laser Module

• 5mw Industrial class 532nm Green Laser Dot Module.

405nm Violet Blue Purple Laser Dot Diode Module 20mW 13mm x 42mm with US AC Power Adapter

Qiaoba Laser Diode Module 650nm 5mw Red Lazer Diodes 2Pack (Laser Cross)

• Wide Range of Working Temperature: The mini diode laser head can work in -10 degree~£«40 degree.
• Application: The red dot laser head widely be used for Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication, etc..
• Feature: The laser head with 650nm wavelength, and working voltage: 5V. Output power: 5mW. Laser Shape: Dot.
• Wire connection: Red wire connect to Positive, Blue wire connect to Negative.
• Package Include: 15 Pack mini laser dot diode module head red 650nm 6mm 5v 5mw diode lasers..

SainSmart USB 4 Channel Relay Automation (5V)

• NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
• Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
• Module with overcurrent protection and relay diode freewheel protection..
• NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
• NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.

Creality 3D Printer Laser Engraver Module Ender 3 S1 Laser Engraving Kit 5W 24V 455nm Blue-Violet Light, Safety Cover, Fixed Focus, and Soot Absorption for Ender 3 S1, Ender 3 S1 Pro & Ender 3 S1 Plus

• Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality. The 5W high-power engraving speed is faster, and the accuracy is higher..
• Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect..
• Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve airflow, all of which contribute to fast and efficient heat dissipation, the built-in air filter cotton can absorb smoke and odor, allowing for prolonged service life..
• Full Protection: Upgraded with a new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin..
• Compatibility and Application: The laser module is compatible with Ender 3 S1, Ender 3 S1 Pro, and Ender 3 S1 Plus. It can be used to cut cardboard, wood, bamboo, rubber, leather, acrylic, plastic, etc..

AITIAO 2Pcs GY-271 QMC5883L Triple Axis Compass Magnetometer Sensor Module 3-5V IIC Electronic Compass Module Magnetic Sensor Module

• TCRT5000 infrared reflection sensor, infrared emitting diodes constantly emit infrared rays.
• Widely used for pulse data sampling of watt hour meter, paper detection of fax shredder, obstacle detection, black and white line detection.
• also it provides a versatile infrared detection system solutions for automation machinery devices.
• When object is in detecting range, infrared ray will be reflected back with high intensity, the module outputs high level and indicating diode is on.
• when the infrared ray emitted is not reflected back or intensity is not high enough, the infrared receiving tube is in the off state and module outputs low level,while indicating diode is off.
• Black line low output, white line high output.

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

• On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
• Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
• (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
• Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
• The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
• With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.

Creality 3D Printer Laser Engraver Module Ender 3 Laser Engraving Attachment 1.6W 12V/24V 450nm Blue-Violet Light, Magnetic Design, with Goggles and Wood Pieces, Upgrade for Ender 3/5 Pro, CR-10

• Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
• Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size..
• Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life..
• Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed..
• Compatibility and Application: The laser module is compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo..