Reviews Diode Laser Marking Machine

Electric Micro Engraver Pen USB Rechargable Engraving Machines With 36 Bits,Portable Mini Engraver Tools, Cordless Rotary Tools Engraved Jewelry Glass Stone Wood Plastic Metal DIY

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

SCULPFUN Laser Engraver Working Table,Laser Honeycomb Pad,Desktop Protection,11.81x7.87x2.17 in,for Laser Engraving Machine Cutter Tool Set

  • ...e design】Laser Honeycomb Working Table contains a very convenient cutting and observing design. When the laser cuts through wood or acrylic, the metal backing plate at the bottom of the honeycomb panel will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether to cut through..
  • 【Necessary accessories for laser cutting]】Laser Honeycomb Working Table uses the laser cutting table to cut wood, acrylic and other materials. The edges of the wood are neat and clean, not easy to be yellowed by smoke, and a clean cutting work can be obtained..
  • 【Metal desktop protection board】Honeycomb Working Table is equipped with a metal desktop protection board, which can protect the table from laser damage. The Laser Protection Pad is very suitable for small DIY diode lasers..
  • 【High-quality workmanship with measuring ruler】The X-axis and Y-axis of the Laser Honeycomb Working Table contain precision scale lines to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraving. The Laser Protection Pad is made of metal and processed by high-precision CNC. The structure is firm, not easy to deform, and has high flatness..
Check Stock

SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

12 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, Durable, Permanent, High Contrast, Brilliance Laser Inks

  • ✅ 100% SATISFACTION GUARANTEE OR MONEY BACK:Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly..
  • ✅ HOW TO APPLY: Shake well, Spray 6-8 inches from the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface, do not have to overspray.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team..
  • ✅ BEST VALUE: Proven Anti-Clog, nanoparticle-technology of Brilliance Laser inks that allows 25% more coverage surface area than competition, with a thin coat spray (may need some practice initially).Hence more profits and less spend!!.
  • ✅ GENERAL GUIDELINES/SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended..
  • ✅ MULTI PACK DISCOUNT: Get more discount (SAVE with our bundle options, check out our listings with mul....
Check Stock

US Stock 50W JPT Fiber Laser Engraver Machine Fiber Laser Marking Machine Engraving Machine 175×175mm Lens with Rotary Axis Compitable with Lightburn

  • 50W Fiber Laser Marking Machine Equipped JPT Laser Source and Dia.80mm Rotating Head.Laser Power: 50W. Marking Area: 175*175mm Engraving Depth:≤1mm(0.024in).
  • Pulse Duration: 200ns. Control board : BJ JCZ board(Original).EZCAD2.Compatible with Lightburn,Windows XP/Vista/7/8/10.Stable performance and high reliability..
  • Applicable material: Fiber laser marking machine can work on all metals such as aluminum,stainless steel, brass, copper etc. and some of nonmetal such as nylon ,light button, ABS , PVC ,PES etc..
  • Imported laser scanning system makes the marking speed up to 7m/s.
  • High-Rate of Electrical-Optical Conversion: up to 70%..
  • Free Shipping.ETA:5 days.No Import Duty.2 year warranty.Remote assistance,Customer and Technical Support.English User Manual and Demo Video offered by USB flash disk along with the machine.Returnable for Non-human-induced Malfunction Machine..
Check Stock

CenryKay 5V 650nm 6mm 5mW Red Dot Laser Head Red Laser Diode Laser Tube Pack of 20

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Laser Modules Wavelength: 650nm. Working Voltage: 5v.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock

Hilitchi 40Pcs Mini Laser Dot Diode Module Head WL Red 650nm 6mm 5V 5mW and 3V 5mW and Light Dependent Resistor LDR Sensor 5 mm GM5539 5539

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
  • Can be used to connect diode tubes for multiple use.
Check Stock

Qiaoba Laser Diode Module 650nm 5mw Red Lazer Diodes 2Pack (Laser Cross)

  • Wide Range of Working Temperature: The mini diode laser head can work in -10 degree~£«40 degree.
  • Application: The red dot laser head widely be used for Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication, etc..
  • Feature: The laser head with 650nm wavelength, and working voltage: 5V. Output power: 5mW. Laser Shape: Dot.
  • Wire connection: Red wire connect to Positive, Blue wire connect to Negative.
  • Package Include: 15 Pack mini laser dot diode module head red 650nm 6mm 5v 5mw diode lasers..
Check Stock

HiLetgo 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock

Ucreate 3D Printer Laser Engraver Kit for Ender-3 S1/pro 24V 1.6W Engraving Laser Modules Simple Installation Safety Protection Precise Focusing Soot Absorption

  • Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
  • The laser engraving head kits enables to engrave metal, wood, acrylic, and others substances..
  • Compatible with Ender-3 S1/Ender-3 S1 Pro/CV-01 Carving Machine, can be adapted to various 3D printers, laser engraving machine, CNC engraving machine and other machines according to requirements..
Check Stock

CULPFUN S9 Laser Engraver 90W Effect High Precision CNC Laser Cutter and Engraver Machine Deep Cutting for 15mm Wood 0.06mm Ultra-Fine Fixed-Focus Compressed Spot,

  • ☑️【90W Effect Laser Beam Shaping Technology】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has....
  • ☑️【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it....
  • ☑️【Safety Protection Design】The laser cutter and engraving machine is equipped with a very convenient power switch, which is not available in....
  • ☑️【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL, LightBurn,....
  • ☑️【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • ... wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection methods, such as viewing the engraving progress, adjusting the carving speed and other operations. In particular, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Computer IP Address Connection..
  • POWERFUL COMPATIBILITY & 1v N SPECIAL FUNTION: As the latest 32-bit chip is used, the engraving machine is compatible with LaserGRBL and paid LightBurn softw....
Check Stock

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • ...Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light source,  marking precious metals hardly consumes precious metals themselves. ENJOYWOOD M4 industrial-grade galvanometer technology greatly improves the engraving and marking speed - 12m/s high speed is 5 times faster than blue light marking machines.Safe use,Unlike the blue light source, the 1064nm infrared wavelength is a cold light source. Even if....
Check Stock