Reviews Dio Full Body

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

3Dio FS FS-2W-001

  • Immersive 3D audio with a stereo signal! 3Dio mimic human hearing to create an incredible audio capturing system..
  • Our customers use them for a wide variety of applications such as: - Field recordings and nature sounds - Room mic in a recording studio - Capturing....
  • The output of the FS binaural microphone is a stereo 3.5mm (1/8") output jack. Simply plug it in to your favorite stereo digital recorder, audio....
  • The 3Dio FS comes standard with a 5/8" microphone stand adapter installed in the base. The microphone stand adapter can easily be removed. The base of....
  • The 3Dio FS contains a 9V alkaline battery within the chassis. The battery is used to power the microphone capsules and lasts 300+ hours of continuous....
Check Stock

Men's Suit for JoJo's Bizarre Adventure Dio Brando Cosplay Costume Uniform Halloween Party Outfits (Medium,Women Size)

  • Costume Include:Top+Pants+Coat+Accessories (As the pictures show).Anime:JoJo's Bizarre Adventure ,Character:Dio Brando.
  • Please refer to the size chart for size selection, you can contact us directly if you have any doubts.
  • Anime JoJo's Bizarre Adventure cosplay Dio Brando costume halloween christmas fancy party suits outfits adult unisex.
  • Dio Brando cosplay costumes , fancy suits ,daily suits ,role playing clothings.
  • Applications:Halloween,carnival,christmas,role playing,stage performance,birthday,party,Easter,cosplay party comic exhibitions,photography,.
Check Stock

THE LAST IN LINE(reissue)

  • --- (Director) - R J Dio / J Bain / V Campbell (Writer).
Check Stock

CosplayCos Dio Brando Cosplay Costume Dio Jacket Shirt Outfit Suit Set

  • Dio Brando Cosplay Costume Dio Outfit Suit Set.
  • Material: Spandex + High quality PU leather + Uniform Cloth + Lining.
  • Includes: Pants + Shirt + Lining Shirt + Accessories.
  • Attention: Please choose a suitable size from our Detailed Size Info in Pictures or in the Product Description..
  • Occasion: Suit for daily wear, also a great choice for cosplay, carnival, comic-con, party, Halloween, Christmas and other fun costume occasions..
Check Stock

CosplayCos Dio Brando Cosplay Costume Dio Jacket Shirt Outfit Suit Set

  • Dio Brando Cosplay Costume Dio Outfit Suit Set.
  • Material: Spandex + High quality PU leather + Uniform Cloth + Lining.
  • Includes: Pants + Shirt + Lining Shirt + Accessories.
  • Attention: Please choose a suitable size from our Detailed Size Info in Pictures or in the Product Description..
  • Occasion: Suit for daily wear, also a great choice for cosplay, carnival, comic-con, party, Halloween, Christmas and other fun costume occasions..
Check Stock

ChromaCast 5B USA Hickory Vinny Appice Autographed Drumsticks

  • Each stick is personally signed by Vinny Appice(Last in Line, Black Sabbath, Dio, Three Legged Dog).
  • Oval shaped wood tip provides a rich, full, balanced sound.
  • Drumstick coating is gloss free to reduce slippage.
Check Stock

ALAMSCN LED Display Module TM1637 0.36'' 4-Digit 7 Segment 4 Bits Red Digital Tube for Arduino Driver Board (Pack of 4)

  • 4-digit LED display module, red highlights, with adjustable LED brightness and clock point, can display decimals, letters, etc..
  • The driver IC is TM1637, compatible with Arduino..
  • The digital display tube can be controlled with only two signal lines, simple and easy to use..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • 4 M2 screw holes, easy to install, locate and combine modules..
Check Stock

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great Compatible with Arduino IDE/Micropython (5PCS)

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
Check Stock

JoJo s Bizarre Adventure Stardust Crusaders Dio Brando Action Figure with Replaceable Face and Movable Joints Anime Figures Statue Toy Cartoon Game Characters Model Desktop Decorations

  • Anime character Dio Brando Action figure model Doll Made of PVC material, colorful, beautiful and practical. With dynamic inspiration and imagination,....
  • The animated model has highly restored and realistic images environmentally friendly, will not cause any harm to the human body..
  • This handmade model is beautifully packaged and is a great gift for Christmas, birthday and New Year gifts. Very suitable for Anime fans and....
  • If you have any questions about our products or orders, please contact us via e-mail, we are happy to help you and reply to you within 24 hours..
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock