Reviews Din Standard Ball Valves

Hollis DIN to Yoke Adapter

  • Fit for 200-300 Bar DIN Scuba tank valves..
  • Tightened using 8mm hex key (not included)..
  • Made of chrome plated brass, high tensile strength and corrosion resistance..
  • Height: 0.6inch/1.5cm, Outer Diameter: 0.8inch/21.5mm, Inner Diameter: 0.4inch/1cm..
Check Stock

2 PCS Stainless Steel Ball Valves TWOZOZO Ball Valve Standard 60 Degree Female NPT Ball Valve with Raw Material Belts 1 Ball Valves

  • High Quality: TWOZOZO Stainless Steel Ball Valves Are Made Of High Quality Materials And Have Good Ductility To Effectively Avoid Cracking..
  • US Standard Threads: This Ball Valve Uses NPT 60 Degree Us Standard Threads, Please Fit Your Thread Diameter When Purchasing..
  • Wide Applications - Ball valves are widely used in mechanical equipment, industrial equipment, water supply and drainage equipment, for example in....
  • Easy To Use: Our Ball Valves Come With A Roll Of Raw Material, So You Don't Have To Re-purchase Them And You Can Install Our Ball Valves As Soon As....
  • High Performance - The internal passage of the drain tap is straight for optimum and complete passage and therefore has a low flow resistance. The....
Check Stock

Scuba Choice Diving Dive Din to Yoke Insert Convert Adapter Valve

  • Tightened using 8mm hex key (not included).
  • Note: even though this insert will fit any DIN tank valve, some valves are made for DIN regulators ONLY.
Check Stock

Dive Rite Din to Yoke Adaptor (Black)

  • Will convert all din regulators back to yoke.
  • Perfect for switching from din tanks to k-valves.
Check Stock

Scubapro 1st Stage DIN to Yoke Adapter

  • Perfect for switching from din tanks to k-valves.
  • Will convert all din regulators back to yoke.
Check Stock

Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve

  • MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
  • TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
  • Double-seal system allows flow to go in either direction.
  • WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
  • EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
  • CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock

Leviton 40987-2 Two Way Splitter

  • HEAVY DUTY CONSTRUCTION: This hose splitter is made of solid high-grade brass making it durable and rugged, it will never rust or corrode. It’s compatible with all standard garden hose connections and made to last a lifetime..
  • BRASS ON/OFF VALVES: Heavy duty on/off valves to control the water flow of each connection to the splitter. The valve levers are made of solid brass so it’s durable and yet it was designed to be easy to grip and turn..
  • EASY TO USE: The brass texture on the splitter connector makes it super easy to connect it to the faucet and the threading on the 2 male ends are designed to fit all standard hoses..
  • LEAK-FREE: A precision threaded connection and rubber gasket for perfect attachment to your faucet provides an extreme water-tight seal. The on/off levers are fitted with high quality ball valves for water tight shutoff making the splitter leak-free..
  • 100% SATISFACTION GUARANTEE: If you are not 100% satisfied with your INNAV8 Brass Splitter and if does not exceed your expectations, we will replace it or refund your money with no questions asked!.
Check Stock

MASTERCOOL 81490 R134A Valve Core Remover Installer yellow gold 6.8 inch for Standard 5mm valve cores only

  • 100% U.S. designed, assembled and tested.
  • Designed for use of servicing valves in R134a systems with standard sized 5mm valve cores.
  • For high (16 mm) and low (13 mm) service port standard type valve.
  • Access and change valve cores while the A/C system is still filled with refrigerant. Overall diameter-1 1/4 inches, length, retracted- 4 3/4 inches,....
  • Stainless steel ball valve design and patented thread remover lets the user block off the system while changing the valves cores, allowing for no....
Check Stock

DXDivers Scuba Tank Transfill Equalizer Hose with Pressure Gauge, PSI/BAR, DIN to DIN or Yoke to Yoke (DIN)

  • Transfer air to equalize between two scuba cylinders.
  • 60" Long with DIN to DIN or Yoke to Yoke.
  • Connect to both 200 Bar and 300 Bar scuba valves.
  • 2" pressure gauge provides dual readings in both imperial and metric.
Check Stock

Electric Meter, KWh Meter, Single Phase 4P LED din Rail Electricity Power Consumption Wattmeter Energy Meter, 10-40A

  • 【DIN Rail Mounting】The energy monitor is small size, light weight, with good reliability and easy installation. 35mm standard DIN-rail mounting in accordance with standard DIN EN50022. Six widths (12.5mm modulus) in accordance with DIN43880..
  • 【5+1 LED Digital Display】Standard configuration 5+1(99999.1KWh) digital display. Double color LED of kilowatt meter indicates the power status (green) and the energy pulse signal (red)..
  • 【Easy to Contact】The standard configuration pulse output is passive (polar) and the remote pulse output can be selected as passive (non-polar). KWH meter is easy to contact with various AMR systems and conforms to the standards IEC 62053-31 and DIN43864..
  • 【One-way measurement】One-way measurement of single-phase two - wire active energy consumption. This has nothing to do with the direction of the load current. Comply with IEC 62053-21..
  • 【Two Wiring Methods】The din rail energy meter has direct connection operation, two wiring methods. Standard configuration S type wiring, U type wiring can be selected. Extend the terminal cover to protect th....
Check Stock

Presta Valve Adaptor - Presta Schrader Valve Adapter - Presta Valve Adapter Bike Pump - Ball Needles for Air Pump - Air Pump Needle for Balls

  • Now you can can inflate your tires with Presta Valves using any "standard" Schrader Valve bike pump. You can use one inflator adapter for all your bikes with Presto Valves and also leave one in the garage with Air Compressor..
  • These Bike Adaptors are so light and can be left on the Presta Valve. That's a time saver if you are using a compressor to inflate your tires. No need to remove the Shrader Adapters..
  • Presta Valve will be the proper bike pump attachment to air up tire inflator adaptor..
  • Bike Pump Adapter will make Life Much Simpler. Ball Pump Inflator Needle for exercise ball..
  • Presta Valve pump adapter made Quality Aluminum alloy with rubber ring seal..
Check Stock

Lifynste 4 Way Brass Hose Splitter, 3/4\ Heavy-Duty Brass Garden Hose Splitter, Garden Hose Adapter Connector

  • HIGH QUALITY MATERIAL: The brass hose splitter is made of 100% solid brass, solid and durable, corrosion proof and has a long service time..
  • COMPLETELY LEAK-TIGHT: Garden hose connector are equipped with high quality ball valves for tight closure. Garden hose separator effectively prevents any leakage or dripping..
  • CONVENIENCE: Standard 3/4 In. Our garden brass hose splitter is designed to easily accommodate all standard hoses, connects two hoses to one faucet and very convenient for you to control the work in different places at the same time..
  • INDIVIDUALLY CONTROLLED: This handy hose splitter includes 4 shut-off valves, ideal for 1 to 4 sprinkler hose faucet valves and enabling multi-tasking. You can use one or others according to your need, giving you the perfect flow for watering plants, flowerbeds, lawns, vegetable and washing your car, or cleaning your pets..
  • PACKAGE INCLUDES: The 4 way hose splitter comes with 4 pcs free rubber gaskets for replacement, and 1 PTFE pipe seal tape for easy and convenient connecting. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock