Reviews Din Rail Isolation Amplifier
CZH-LABS DIN Rail Mount 12 Amp Solid State Relay SSR Module in 4~32VDC Out 100~240VAC 1 Channel
- MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated)..
- Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode..
- Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes..
- Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative..
- DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm....
Check StockASI ASI451145 4-20mA Analog Signal Splitter, 3-Way Isolation
- 3-Wire, analog and signal input, dual output.
- 3-Way isolation protects from interference and signal malfunctions.
- Attain precise calibration via zero and span adjustable functionality.
- Din rail mounting for quick installation and removal.
- Screw clamp terminations for easy wiring.
Check StockASI ASI451141 4-20mA Analog Signal Splitter, 1 Input, 4 Output
- 4-20mA Single input with quad output Analog Signal Splitter.
- 3-Way isolation between power supply, input and each of the 4 outputs to eliminate interference.
- Din rail mounting for quick installation.
- Zero and span adjustment for precise calibration.
- Screw clamp terminations for easy wiring.
Check StockGCAN-207 RS232/485 to CAN Converter,Realize bidirectional Communication Between RS232 or RS485 Bus and CAN Bus
- Standard serial port level, RS232 model or RS485 model can switch by software.
- Conversion direction can be set to: CAN?? Serial, CAN?Serial, CAN?Serial.
- Serial Bus baud rate range from 600bps to 115200bps.
- CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards.
- CAN-Bus baud rates range from 5Kbps to 1Mbps.
- CAN-Bus interface with electrical isolation.
- CAN-Bus isolation converter insulation voltage: DC 1500V.
- Working temperature range from -40 to 85 °C.
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-150V AC Output 4-20mA DC
- Working Stability: annual change 003c 0.2%.
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Load Capacity: 2 times current continuous.
- Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check StockLoulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-300V AC with 3-Output 0-5V DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC513V).
Check StockLoulensy 3-Phase AC Voltage Transducer Sensor Transformer Transmitter 3-Input 0-450V AC with 3-Output 4-20mA DC
- Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Impulse Voltage:5KV(peak value),1.2/50uS.
- Default Frequency:40-60Hz(contact us,if you specially need different frequency,e.g. 100Hz).
- Load Capacity: 2 times current continuous.
- Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
- Storage Temperature:-40 to 70 degrees Centigrade,20% to 95% without condensation.
- Working Stability: annual change 003c 0.2%.
- Working Environment:-10 to 50 degrees Centigrade,20% to 90% without condensation.
- Isolation Resistance:003e/=20M Ohm(DC520V).
Check StockBreeRainz Din Rail Cutter, Double Groove Rail Cutter Tool w/Dual Scale Measuring Ruler, for 1.4 Inch Iron Aluminum Rails
- 【Double Groove Rail Cutter】- Featuring 2-groove design. Come with long lever handle. This double groove rail cutter can precisely cut both iron & aluminum Din rails at a time with less effort..
- 【Smooth Rail Incision】- Differ from band saws incision, sharp blade on the professional din rail cutter can ensure the rail incisions neat & smooth. No complex operation. Just press the handle and cut the rails straight.
- 【Dual Scale Measuring Ruler】- The new version of manual rail cutter has a dual scale ruler included, which allows you to quickly adjust the cutting length and easily cut rails to your desired sizes..
- 【Wide Cutting Range】- Various sizes of steel & Aluminum DIN rails can be cut. 20" total cutting length. You just need push the slider, set the cut length, insert the rails and get the rails you need right away..
- 【Practical Rail Cutting Tool】- Simple Structure w/ portable size. Manual din rail cutter provides a perfect solution for electric power, construction and completing other tedious cutting tasks..
Check StockDC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-200V DC Output 0-5V DC
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-1000V DC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Power Supply:11-30V DC(any stable power,e.g. 15V dc).
- Working Stability: annual change 003c 0.2%.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Check StockDC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-100V DC Output 0-5V DC
- Isolation Resistance:20M Ohm(DC500V) or above.
- Capacity Max:0-1000V DC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
- Power Supply:11-30V DC(any stable power,e.g. 15V dc).
- Working Stability: annual change 003c 0.2%.
- Feature:Voltage Terminal Insert,standard din rail(35mm)mounting.
- Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
Check StockUCTRONICS Raspberry Pi DIN Rail Mount, Compatible with Arduino, RPi 4B/3B+/3B/2B/B+, Pi Zero, Raspberry Pi Pico
- A DIN option to provide a wide range of flexibility in mounting for multiple SBC devices, such as Raspberry Pi 4, 3 B/B+ and all other A, B and Zero Models, Raspberry Pi Pico, Arduino Uno/Mega 2560, BeagleBone series..
- The mounting bracket is made of 1.2mm carbon steel, attaches to both the SBC and the DIN rail sturdily, multiple optional mounting holes help you mount the different boards and the DIN rail clips in both horizontal and vertical way..
- Recommended for creating an array of Raspberry servers, home lab and other industrial projects, make it very professional and easy to maintain when needed..
- Has no hassle to mount in the 19" rack with UCTRONICS DIN rail rack mount, please search for ASIN B09823N6FY to get it..
- You'll be getting a mounting bracket, 2 DIN rail clips, and standoffs, and screws..
Check Stock