Reviews Digital Potentiometers
HiLetgo Game Joystick Sensor Game Controller Sensor JoyStick Breakout Module for Arduino PS2 Raspberry Pi
- High-quality rocker, long life, stable performance..
- Two analog outputs, all the way to digital output..
- X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle..
- Like the next press the joystick, you can move all the way to touch the authority for the digital output, has been pulled..
- For two degrees of freedom servo PTZ control or other remote proportional control..
Check StockZOSKAY 1X DS3218 Update servo 20KG Full Metal Gear Digital servo Baja servo Waterproof servo for Baja Cars(Control Angle 180)
- DS3218 20KG Large Torque Digital Servo with precision potentiometers,stable,low noise,waterproof: IP66.
- High-precision metal gears with hard anodizing, CNC aluminium middle Shell, Dual ball bearings.
- Large Torque&speed – 18.5kg.cm (0.16S/ 60°)@5V,maximum 21.5 kg.cm (0.14S/60°)@6.8V Operating travel:180°(PWM 500-2500μs).
- High performance digital standard servo for any crawler.
- and for robot joint activities,TRX 4 Traxxas, SMT10 Mega Truck, SCX10 II,ARRMA Nero 1/8…..
- Package Included: 1 x Digital Servo 1.58x0.79x1.60inch (40x20x40.5mm).
- Weight: 60g (2.12oz) 1 x 25T Adjustable metal servo arm.
Check Stock10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)
- Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
- Such a sufficient quantity can easily meet your daily usage and replacement demand.
- Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
- Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
- The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
- Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
- Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.
Check Stock35KG Digital Servo Full Metal Gear High Torque Waterproof DS3235 with Two 25T Servo Arms for RC Car Robot Control Angle 180
- UPGRADED NEW VERSION: DS3235 35KG High-precision, Coreless Stainless Steel Gear, Fully Waterproof, Digital Servo. Included two 25T double-locking metal servo horns.
- LARGE TORQUE: maximum torque is up to 35 kg/cm (275 oz/in)@6.8V, made of strong copper & aluminum gears.
- HIGH PERFORMANCE: Equipped with high precision potentiometers and high-resolution digital chip, fast response, strong anti-interference ability, low noise, fast heat dissipation..
- HIGH ROTATION: well-controlled, 180 degree rotation. 360 degree rotation when power-off, perfect for robot joint activities.
- HIGH QUALITY: Waterproof rubber seals screws, made of first-grade material ensure the longevity of the products. CNC aluminium middle shell enhances heat dissipation and ensures the servo motor can work well..
Check StockANNIMOS 20KG RC Servo Digital High Torque Full Metal Gear Waterproof,180° Control Angle
- ✔High-precision digital servo upgraded version - advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
- ✔Durable - equipped with strong copper & aluminum gears, CNC aluminium middle Shell,to ensure long service life.
- ✔Large Torque - maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V,with 25T Adjustable metal servo arm.
- ✔High Rotation - well-controlled,180 degree rotation.
- 360 degree rotation when power-off, perfect for robot joint activities.
- ✔Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check Stockuxcell 5 Pcs 100K Ohm Trimmer Pot Variable Resistor Potentiometer
- Square Body Size : 6.8 x 6.8mm/ 1/4" x 1/4" (L*W).
Check StockANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed High Torque Stainless Steel Gear Waterproof Standard Baja Servos 180 Degrees
- Used For: 1/10 1/8 scale Crawler / Buggy / Truck and any application where waterproof standard servos are used.
- High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation.
- Full waterproof servo to maintain good water tightness in wet conditions..
- Dimensions - 1.58x0.79x1.60inch (40x20x40.5mm).
Check StockRockville SingMix 45 1000w Powered Karaoke Mixer Amplifier w/Bluetooth/USB/Echo
- 500 x 2 Peak @ 4 Ohm. 150 x 2 RMS @ 4 Ohm. 100 x 2 RMS @ 8 Ohm. A and B parallel speaker outputs supports (4) 8 ohm speakers or (2) 8 ohm speakers or....
- USB input will play music files from a thumb drive or hard drive (32gb max). SD card playback will play music files stored on a memory card (32gb....
- Full controls over echo effects: volume, 2 band echo EQ, repeat, and delay parameters. Selectable mono/stereo echo effect. Dual 7 band master EQ....
- Remote control for USB/SD playback and Bluetooth Full function. Built in pre-amplifier. Built in quiet cooling fan. Digital VFD display. Perfect for....
- Precision tuning with high quality professional potentiometers and knobs. 115V/230V switchable for worldwide use. Unit weight: 14 lbs (6.35). Shipping....
Check StockANNIMOS 25KG Digital Servo Full Metal Gear High Torque Waterproof for RC Car Crawler Robot Control Angle 270°
- ▶New Model: DS3225MG More torque higher speed.
- ▶Power cord is longer up to 15.75inches(40cm),and also send with a 25T adjustable metal servo arm.
- ▶Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used.
- ▶Equipped with high precision potentiometers and high-resolution digital chip, ensure stable performance, fast response, strong anti-interference ability,low noise, fast heat dissipation.
- ▶Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).
Check StockANNIMOS 25kg RC Digital Servo Large Torque High Speed Full Metal Gear Waterproof 180 Degree Control Angle Red
- ✔New Model:DS3225MG 25kg Servos.More torque,higher speed.
- ✔Power cord is longer up to 17.7inches(45cm),and also send with a 25T adjustable metal servo arm.
- ✔Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation.
- ✔Best for your DIY Project:compatible with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used.
- ✔Dimensions:1.57 x 0.78 x 1.59in (40 x 20 x 40.5 mm).
Check Stock4sets DS3218 Update servo 20KG Full Metal Gear 25T Servo Arm Digital Servo Waterproof for Mechanical arm Fittings Baja Cars RC Cars,Control Angle 270
- Large Torque: maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V.
- High Quality:equipped with strong full metal gears,CNC aluminium middle Shell.
- Upgraded Version: advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
- Package Includes:4 X DS3218 Digital Servo 20KG,4 X 25T Servo Arm.
- Note:This servo just waterproof, but it can not work underwater..
Check StockFan Model FS-25W 25KG/.07S Waterproof High Torque Coreless Digital Servo for RC Car Crawler Truck Robot
- Torque(6.0v/7.4V): 24.0 kg-cm (333 oz/in) │ 25.0 kg-cm (347 oz/in) Speed(6.0v/7.4V): 0.08 sec/60°│ 0.07 sec/60°.
- The Coreless motor provides high speed, response, incredible efficiency and low power consumption..
- Full waterproof servo to maintain good water tightness in wet conditions.Extremely strong unique steel gears ensure long-life and durability..
- High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision,....
- Used For: 1/8, 1/10, 1/12 Scale Crawler / Truck / RC Car, Robot, Boat and any application where waterproof standard servos are used.
Check StockMiuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°
- DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
- High torque steering servo for robot arm,boats,vehicles and remote control toys..
- Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
- Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
- Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
- when the input signal reaches 2500usec, the angle rotates to 270 degrees).
Check Stock