Reviews Differential Kit

GoolRC RC Car Metal Differential Kit, 38T Gear 17T Gear Differential Carrier Drive Shaft Steering Hub Differential Gears for WLtoys A949 A959 A969 A979 K929 A959-B A969-B A979-B K929-B RC Car

  • ★This differential kit comes with 2 differential carriers, 1 drive shaft, 4 steering hubs, 2 differential gears, other gears, etc..
  • ★This differential kit is designed for WLtoys A949 A959 A969 A979 K929 A959-B A969-B A979-B K929-B Cars..
  • ★Made of high-quality metal to allow this kit durable in use..
  • ★Make the left and right drive wheels can be rotated at different speeds..
  • ★High wear-resistant capacity and ensure a stable and safe driving..
Check Stock

Traxxas 5136X Differential Oil Kit (10,000, 30,000, 50,000 Weights)

  • Differential oil kit features 1 each: 10K, 30K, 50K weights.
  • Traxxas differential oils allow you to change the locking action of your sealed differentials.
  • Thicker oils provide more differential locking action.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 6780 Complete Center Differential Kit for Select 4x4 Vehicle Race Remote Control Car Models

  • UPGRADED REPLACEMENT PART: Upgraded replacement complete center differential set for your 4x4.
  • DURABLE DESIGN: More durable than stock parts and better suited to high power ESC/Motor systems.
  • KIT INCLUDES: Kit includes (1) center differential part.
  • FITS: Hoss 4x4 VXL, Rustler 4x4 VXL, Rustler 4x4, Slash 4x4 Platinum, Slash 4x4 Ultimate, Slash 4x4 VXL, Slash 4x4, Stampede 4x4 VXL, and Stampede 4x4.
Check Stock

Prime Ave Differential & Transfer Case Crush Washer Gasket Kit for Toyota Lexus Scion Part# 90430-24003 + 12157-10010 + 90430-A0003

  • (25) Brand New Crush Gasket Washer Kit For Toyota Lexus Scion Transfer Case And Differential Service.
  • Include (4) 90430-24003 copper washer for front differential drain plug.
  • Include (12) 90430-A0003 aluminum washers for transfer case plug.
  • Include (9) 12157-10010 steel washers rear & front differential plug.
  • Perfect fitment on most Toyota, Lexus & Scion | Factory replacement crush washers designed for a solid seal | Tested & certified to meet or exceed OEM quality standards or your money back.
Check Stock

Micsig DP10007 High Voltage Differential Probe Kit, Oscilloscope Probe Kit, 100MHZ 700V

  • 【Maximum differential test voltage】 Comes with 70V-700V measurement range, you can safely measure up to 700V floating voltage and up to 100 MHz bandwidth..
  • 【High voltage conversion】The testing probe kit can convert the input high voltage signal to low voltage signal for oscilloscope observation and analysis..
  • 【Safer to use】High-impedance isolation between the sampling input and output of the high-voltage differential probe to protect personal safety..
  • 【Multifunctional kit】All 6 pieces come with three different connectors, which are helpful for various tests on different occasions..
  • 【Wide application】The attenuation rate is 10X/100X, which is widely used in most of oscilloscope..
Check Stock

Yukon Gear & Axle (MK D44-JK-REV-RUB) Minor Installation Kit for Jeep JK Rubicon Dana 44 Differential

  • Install Kit for Differential Gear Changes.
  • Designed for Specific Differential Applications.
Check Stock

Readylift 67-5443 TRD Pro Skid Plate Adapter Kit

  • Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
  • Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
  • Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
  • Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
  • New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check Stock

New Differential Bearing And Seal Kit Front Compatible With/Replacement For Yamaha 700 Rhino Fi 08-13 25-2073

  • Specs: Differential Bearing and Seal Kit.
  • Meets or Exceeds OEM Specs for Fit and Performance.
  • Compatible With/Replacement For: Yamaha 700 RHINO FI 2008-2013, KODIAK 450 EPS 4WD SE 2020, KODIAK 700 4WD 2016-2018, KODIAK 700 EPS 4WD 2016-2018, KODIAK 700 EPS 4WD Green 2018, KODIAK 700 EPS 4WD Hunter 2018, KODIAK 700 EPS 4WD SE 2018, VIKING 700 2014-2018, VIKING 700 EPS 2018, VIKING 700 EPS Red/Green 2018, VIKING 700 VI EPS 2015-2018, VIKING 700 VI EPS Hunter 2018, VIKING 700 VI EPS Ranch 2018, WOLVERINE 2016-2018, WOLVERINE EPS 2017, WOLVERINE R-SPEC 2016, WOLVERINE R-SPEC EPS 2016-2017.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Differential Bearing and Seal Kit built to meet OEM specifications.
Check Stock

ReadyLift 69-5475 4.0'' SST Lift Kit Toyota Tundra Front with 2'' Rear with Upper Control Arms without Shocks

  • Max Lift: 4.0"F-2.0"R - Max Tire Size: 35".
  • Not for use on 2015 Tundra TRD Pro w/ Bilstein shocks.
  • Precison crafted upper strut extensions designed to position the strut in the same mounting angle position..
  • Kit includes differential drop brackets which lowers the differential on 4WD models. This keeps the near factory CV angle specifications that Toyota built into these great trucks..
  • New powdercoated sway bar frame mount spacers to keep your sway bar working properly..
Check Stock

All Balls Racing Differential Seal Kit 25-2033-5 Compatible With/Replacement For Yamaha YFM350FA Bruin 4WD 2004-2006, YFM350FGW Grizzly 4WD 2007-2014, YFM350FW Big Bear 1996-1999

  • Specs: Differential Seal Only Kit Rear, Kit contains the necessary seals trepair oil leaks.
  • Meets or Exceeds OEM Specs for Fit and Performance.
  • Compatible With/Replacement For: Yamaha YFM250 Beartracker 1999-2004, YFM250 Big Bear 2007-2009, YFM250B Bruin 2005-2006, YFM350BA Bruin 2WD 2004-2006, YFM350FA Bruin 4WD 2004-2006, YFM350FGW Grizzly 4WD 2007-2014, YFM350FW Big Bear 1996-1999, YFM350GW Grizzly 2WD 2007-2011, YFM350U Big Bear 1996-1999, YFM35FX Wolverine 1995-2005, YFM35X Wolverine 2006-2009, YFM400 Big Bear 2WD 2000-2004, YFM400 Big Bear 4WD 2000-2006, YFM400 Kodiak 2WD 2000-2004.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Differential Seal Only Kit Rear built to meet OEM specifications.
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock