Reviews Differential Inputs

AudioControl The Epicenter

  • In Dash version of The Epicenter Bass Restoration Processor Built-in 160 dB capable microphone.
  • Hi-SPL display Selectable display switching monitors vehicle electrical system ParaBass equalization circuitry.
  • Line level and active speaker level inputs accommodates OEM integration Balanced differential inputs Switchable illumination (blue or red)½ DIN chassis includes mounting brackets.
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Control

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. ARM9 main control chip,FPGA core algorithm chip..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
  • Handwheel Three Output:Voltage, Single-Ended, Differential.
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

JL Audio RD1000/1 NexD Monoblock Class D Car Audio Amplifier

  • JL Audio RD-Series RD1000/1 | Class-D Monoblock Amplifier | RMS Power Rating: 4 ohms: 500 watts x 1 chan. | 2 ohms: 1000 watts x 1 chan. Total power....
  • Differential-Balanced Inputs | Speaker-level (high-level) inputs: JL Audio XD-CLRAIC2-SW Required, sold separately | NexD Technology delivers....
  • LED power (green) and protect (red) indicators | Soft start turn-on | Mono channel operation | Preamp RCA outputs to daisy chain multiple amps | 3-way....
  • Dual speaker terminals simplify the hookup of multiple speakers | Heavy duty aluminum alloy heat-sink for extreme heat dissipation | Total Harmonic....
  • Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz | Fuse Rating: 80 A x 1 | Dimensions: 7"W x 14-11/16"L x 2-3/16"H.
Check Stock

Digital Microphone Amplifier, Reverberation Board Low Noise for Audio Equipments

  • For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples..
  • Cond over I2C,The chip can be configured as 4 single-ended input channels, or two differential channels..
  • As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range..
  • We like this ADC because it can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use. It is a great general purpose 12 bit converter..
  • The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. The address can be changed , you can have up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs..
Check Stock

NVX VADM4 400W RMS Full Range Class D 4-Channel Car/Marine/Powersports Compact Micro Amplifier - Marine Certified

  • RMS POWER: 【4 ohms: 75W x 4 chan.】【2 ohms: 100W x 4 chan.】【4 ohms bridged: 200W x 2 chan.】.
  • COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 7.2"L x 3.4"W x 1.45"H.
  • MARINE CERTIFIED: Our VAD line includes a conformally coated, marine grade circuit board. This allows this amplifier to be installed in nearly any application..
  • FEATURES: LED indicator lighting | 3-way protection circuitry | Balanced Differential Inputs | Speaker-level (high-level) inputs | Selectable crossover modes.
Check Stock

Monolith Liquid Gold Balanced Headphone Amplifier & DAC by Alex Cavalli, Solid State Amp, AKM AK4493EQ DAC, Balanced & Single-Ended Headphone Outputs

  • Solid State Amplifier : Balanced design. Ultra high power. The Liquid Gold X is a fully differential, balanced, current feedback, solid state amplifier with an approximate full output power of 3.6 watts per channel into a 50-ohm load. The amplifier is microprocessor controlled using precision A-to-D and D-to-A conversions to manage and monitor the runtime behavior of all critical aspects of the circuitry..
  • AKM AK4493EQ DAC: Detailed sound. Exceptional musicality. The AKM AK4493 is AKM's new flagship 32-bit stereo premium DAC. It supports PCM inputs up to 768kHz and a Direct Stream Digital (DSD) input of 2.8/5.6/11.2 (maximum) MHz, the industry's highest level. An internal circuit employs a newly developed 32-bit digital filter for the ultimate in sound quality and musicality..
  • Balanced and Single-Ended Headphone Outputs: With multiple inputs and outputs for balanced and single-ended operation and easy front panel input selection, the Liquid Gold X is compatible with just about everything..
  • Versatile Inputs: Digital or Analog — We've Got You Covered: The Liquid Gold X amplifier features both single-ended and balanced analog inputs, as well as USB, Coaxial, and Optical digital inputs to support all your connectivity needs..
Check Stock

JL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier

  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
  • Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
  • preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check Stock

ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier

  • Provides 16-bit precision at 860 samples/second over I2C.
  • Can be configured as 4 single-ended input channels, or two differential channels.
  • Up to 4 ADS1015's connected on a single 2-wire I2C bus for 16 single ended inputs possible.
Check Stock

DAOKI 5PCS PAM8302 2.5W Single Channel Class D Audio Power Amplifier Module Amp Development Board for DIY with Dupont Cable

  • This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers, Inside the miniature chip....
  • Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over half a Watt) - making it perfect for portable....
  • The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply....
  • The output is "Bridge Tied" - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency....
  • Package Content:5 x PAM8302 Class D Amplifier Module, 1 x 11.8" Female-Male Dupont Cables 30 PIN.
Check Stock

JBL DSP4086 8-Channel Class D Amplifier Design with Digital Signal Processing

  • Small footprint, All-in-One Class D Amplifier with DSP Control: JBL DSP Amplifier has everything you need to create a professional sound quality audio system with the ability to mount your amplifier in tight spaces..
  • Everything You Need to Get Started: JBL DSP Amplifier has everything you need to create an audio system, or expand your existing one, plus the ability to add more power by using it as a line driver when you are ready for your next power upgrade..
  • Simple Tuning Interface with Complex Features: Easy-to-use tuning interface anyone can understand, learn and control with enough horsepower to satisfy experienced installers..
  • Versatile Connectivity: This amplifier has balanced differential inputs to provide you with the best sound quality & noise rejection, can accept RCA or speaker-level inputs so it’ll work in almost any system..
  • Convenient Bass Control: Wired remote control allows for quick adjustment of low frequency output with -30 to +6dB adjustment directly from the driver’s seat.
Check Stock

EMB Professional Sound System EB631EQ Graphic Equalizer

  • TRS or XLR balanced inputs and outputs differential / Choice of stereo or the sum of the synthesis of left and right channel subwoofer.
  • X10 range are two-channel selector switch / Two channels have 40Hz high pass filter (low cut).
  • All outputs with phase reverse switch / The output of all bands can be independently adjusted average.
  • 24dB/Unkwitz-Riley filters (the professional standard) - Stereo / Mono status indication LEO lights, indicating that the mode selection unit.
Check Stock

Rockford Fosgate Punch PBR400x4D Compact Chassis 400-Watt Full-Range 4-Channel Amplifier

  • Our compact (1.5" x 4.25" x 6.75") PBR400x4D is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power!.
  • Versatile design can be used in either 2 or 4 channel configurations (RMS Power Output: 50 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged).
  • Ultra efficient Class D full range design produces maximum power with minimal strain on the vehicle's electrical system. A great choice for both mobile installs as well as motorcycles and recreational vehicles.
  • High level inputs with auto-on feature as well as differential RCA inputs along with selectable fixed 12dbB/Octave Butterworth Crossovers make the PBR400x4D amp compatible with just about any installation.
  • Famous Rockford Fosgate build quality insures that the PBR400x4D will handle everything you throw at it! Full 1-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

DORHEA 3PCS ADS1115 16 Bit Analog to Digital Development Board ADC Converter Module 4 Channel Board with Programmable Gain Amplifier 2.0V to 5.5V for Raspberry Pi

  • The address can be changed to one of four options (see the datasheet table 5) so you can have up to 4 ADS1115's connected on a single 2-wire I2C bus for 16 single ended inputs..
  • For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C..
  • The chip can be configured as 4 single-ended input channels, or two differential channels, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range..
  • This 16 bit converter can run from 2V to 5V power/logic, can measure a large range of signals and its super easy to use..
  • The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C..
Check Stock