Reviews Diesel Transmission Cooler

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Dodge Ram 2500 3500 5.9L L6 Diesel 68004317AA 5086946AA Steel Bracket

  • Replace Part Number: 68253200AA, 68004317AA, 5086946AA, 5086946AB. Please check OE part number before purchase..
  • Transmission Fluid Heat Exchanger compatible with 2003 2004 2005 2006 2007 2008 2009 Dodge Ram 2500 5.9L 359CU. IN. L6 DIESEL OHV TURBOCHARGED,....
  • Updated removable brass AN O-ring fitting adapter, which is removeable, stronger and leakless. The 8AN Male Flare fitting size is the same with OEM,....
  • Trans Torque Converter Oil Cooler mounted to the side of the engine, it uses engine coolant to heat and or cool the trans fluid coming directly out of....
  • It is critically important to use care when installing the cooler lines to the cooler. Professional installation is highly recommended. Transmission....
Check Stock

Amsoil FLSHCN-EA Engine and Transmission Flush 16-oz Bottle 1

  • Prepares engines and transmissions for new oil.
  • Removes deposits and sludge for improved efficiency, fuel economy and lower emissions.
  • GASOLINE AND DIESEL ENGINES --Helps loosen sticky valves and rings, minimizing blow-by and reducing emissions --Helps quiet lifter noise --Promotes....
  • AUTOMATIC TRANSMISSIONS --Cleans deposits in oil cooler and ports --Helps unclog fluid passages --Cleans deposits and varnish from clutch plates,....
  • APPLICATIONS: AMSOIL Engine and Transmission Flush is recommended for diesel and gasoline engines, and automatic transmissions. Do not use it in....
  • DIRECTIONS: Works in 1 treatment. Is safe enough to use every oil change. ENGINE: Add bottle to engine oil fill port. Idle for 10-15 minutes, then....
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)

  • ... ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
  • ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
  • ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
  • ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes i....
Check Stock

3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc

  • Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
  • Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
  • Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
  • Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
  • Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
  • Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

  • 1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
  • 2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
  • 3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
  • 4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
  • 5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..
Check Stock

OTC 1750A 6000 lb. 'Revolver' Diesel Engine Stand with Universal Engine Adapter Assembly

  • OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures.
  • 96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine.
  • Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance.
  • 2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded.
  • Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications.
Check Stock

Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Auto Heat Exchanger Base for Dodge Ram 2500 3500 Cummins Diesel 5.9L 6.7L Replaces OEM 68004317AA 5086946AA 5086946AB 4930582

  • TORQUE CONVERTER OIL COOLER - New replacement torque converter oil cooler for Cummins transmission torque converter cooler compatibility with....
  • HIGHLY PERFORMANCE - Replace a new oil cooler transmission can reduce the oil temperature, reduces oil consumption. Customers can find the....
  • FUNCTIONS - The transmission oil cooler is an essential component of every vehicle, helps the transmission stay cool, even when working harder than....
  • SYMPTOMS OF A FAILED TRANSMISSION OIL COOLER - The proper functioning of it is necessary for a healthy vehicle, and if it is worn, you could be in big....
  • KINDLY REMINDER - Kindly please refer to part number and fitment chart carefully before place order to avoid buying wrong. High quality OEM....
Check Stock

TCTAuto 10AN (5/8') Hose 5Ft Universal Stainless Steel Braided CPE Oil Gas Fuel Hose Fuel Line

  • Package includes: 5Ft 10AN stainless steel braided fuel line..
  • Mostly worked with coolant, fuel, diesel, oil, hydraulic fluid, pump gas, alcohol and air, pump, oil return, fuel return system, turbo cooler system and transmission system. NOT FIT E85..
  • Made of Polyurethane(CPE) on the inside that gives them high chemical and heat resistance, along with a braided stainless steel outside which gives them high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • Working Temperature: -40 F to 248 F(-40°C to +120°C) under most operating conditions. Working Pressure: 1015 PSI. Burst Pressure: 6090 PSI..
  • We offer 2 Years Warranty of all the products in our store, freely contact us if you have any questions..
Check Stock

Derale 15840 Hyper Dual-Cool Remote Cooler

  • Keep your transmission fluid cool with a 26,000 GVW transmission cooler kit and fan..
  • Small transmission cooler size: 11 1/4” X 18 1/2” X 3 3/4“..
  • Aftermarket cooler fan size: 11” diameter, 500 cfm, with 5.6 amp draw..
  • Trans cooler kit with a push or pull option for the fan depending on your needs..
  • Black powder coated oil cooling system for long life and good looks..
Check Stock