Reviews Die Pellet Mill

PRM Traxodent Retraction Caps Small Size 1 Pkg/120

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3623 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

Spex Sampleprep 3614ST Steel Pellets for 3614 Die 40 mm

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3614 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

Epidri Pellets Racemic Epinephrine Size 3 Yellow 1.9 mg 350/Box

  • Polished steel pellets for routine pressing of non-abrasive materials, for use with 3614 evacuable-pellet die set (sold separately).
  • Polished face ensures a flat, analytical surface.
  • Close tolerance and sharp edges prevent powder from feathering into the gap between the pellet and die bore.
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock

EVERYGROW Grain Mill, Flour Mill Grinder for Home, Molino de Maiz Electrico, Corn Grinder, Wheat Grinder, Nutrimill, Grain Mill Grinder Electric, 13.2 Gallons (50L)

  • 【Large-capacity & High-efficiency】: EVERYGROW electric grain mill adopts high-quality grinding core to ensure consistent grinding speed and grain size. It can be your corn grinder, flour mill, wheat grinder, soy grinder or rice mill. It can also be a feed pellet machine or grind various spices and herbs. The capacity of the full bucket is up to 13.2 gallons, meeting your large-capacity grinding needs..
  • 【Absolutely Dust-Free】: After turning on the EVERYGROW electric mill grinder, you no longer need to worry about it will produce a lot of dust when grinding and fill your warehouse or farm. All grains will be ground through the green feeding port, and the finished product will go directly into the white storage bucket, eliminating the possibility of any dust generation..
  • 【5 Filter Modes as You Wish】: This flour mill grinder is equipped with 5 kinds of filters. According to your different needs, you can choose to install the appropriate filter, and the grain can be ground into large grains, medium grains, small grains or powder state..
  • 【Easy to Use & Store】: This molino de maiz electrico switch is very simple, without any other complicated settings, you can easily grind your grains into the same size of granule in a short time with one butto....
Check Stock

SPEX 6775-115 Freezer/Mill, Small, 115V, 60 Hz

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

YOYO TOOLS, Carbide Square Nose End Mill Set- Metric Carbide End Mill CNC Milling Cutter Tungsten 4 Fultes by YOYOTOOLS (D8+D10 End Mill)

  • 8mm and 10mm End Mill Set, Material : Tungsten Carbide.
  • End Mill Cutting Diameter : 8mm , 10mm, HRC55 degrees.
  • Suit for: with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

Jenway (Bibby Scientific US) 8307045 Cole-Parmer Instrument Company 10x10 mm Cell Test-Tube Holder, 6320D

  • Accepts all SPEX Sample Prep Evacuable Pellet Die Sets.
  • Can be operated anywhere in the world, even under the most primitive conditions.
  • Economical alternative to motorized presses for labs with a small sample load.
  • Hardened steel buffer plate is engraved with concentric circles and enables easy centering of the die.
  • Manual, hydraulic laboratory press with buffer plate.
Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

  • Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
  • Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock