Reviews Die Nuts And Stocks
2\ NPT Pipe Carbon Hex Rethreading Die
- Dies are ideal for maintenance and repair work.
- Dies are recommended for use with hexagon die stocks.
- Threading die can be used with a wrench or socket when space is limited.
- Dies are made of HCS (high-carbon steel) for lasting durability.
Check Stock11/16\-20 Carbon Hex Special Rethreading Die
- Dies are ideal for maintenance and repair work.
- Dies are recommended for use with hexagon die stocks.
- Threading die can be used with a wrench or socket when space is limited.
- Dies are made of HCS (high-carbon steel) for lasting durability.
Check StockCentury Drill & Tool 98513 Die Stock, 1-7/16\ Hex
- Dies are ideal for maintenance and repair work.
- Dies are recommended for use with hexagon die stocks.
- Threading die can be used with a wrench or socket when space is limited.
- Dies are made of HCS (high-carbon steel) for lasting durability.
Check StockIRWIN Hex Die, High Carbon Steel, Rh, M12-1.75 (6644)
- Dies are ideal for maintenance and repair work.
- Dies are recommended for use with hexagon die stocks.
- Threading die can be used with a wrench or socket when space is limited.
- Dies are made of HCS (high-carbon steel) for lasting durability.
Check StockIRWIN Hanson 6520ZR Die 1/4\-20 NC 1\ Hex, for Tap Die Extraction
- Dies are ideal for maintenance and repair work.
- Dies are recommended for use with hexagon die stocks.
- Threading die can be used with a wrench or socket when space is limited.
- Dies are made of HCS (high-carbon steel) for lasting durability.
Check StockThe ROP Shop | 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, Chain #420
- The ROP Shop replacement 40 Inch Shaft Kit for Drift Trike Bikes with (3) Key Stocks 6x80, & Chain #420.
- Specs - Shaft Size: 40". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 40" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check StockFunny Get Rich Or Die Mining Bitcoin Miner BTC Crypto Mining T-Shirt
- This 8-bit vintage retro Get Rich Or Die Mining GPU Bitcoin, BTC, Ethereum or Monero Miners Tee makes a great gift for a crypto fan, cryptocurrency miner..
- 8-bit Get Rich Or Die Mining , A rich nerd or trader can make money with digital currencies like btc, bitcoin, These crypto coins can be mined with crypto mining rigs. A crypto currency can be a alternative for stocks, shares and..
- Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check StockHHIP 1011-0110 110 Piece (#4-3/4 Inch &M6-18) HSS Tap & Die Set
Check StockPrimera LX610 Color Inkjet Label Printer with Plotter Cutter 74541 - Print and Cut Any Label Shape or Size in One Machine. Prints Up to 5 Inches Wide
- The LX610 Color Label Printer with Built-in Plotter Cutter prints and cuts your labels in one machine. It makes it easy for businesses to quickly, efficiently, and affordably make their own high-quality product labels..
- Print up to 3,000 labels per day at up to 4800 dpi print resolution. Max Print Width: 4.1" (108mm) - Die-cutting, 5" (127mm) - Pre-die cut labels..
- Single ink cartridge with interchangeable pigment and dye inks.
- If using the printer for digitally die-cut labels, only Primera smart chipped continuous stocks (gloss BOPP, premium gloss paper, magnetic) can be used. Identifies media type, tracks % remaining, etc. Pre-die cut materials may also be used. Highly water and scratch resistant with synthetic materials and pigment ink..
- Every printer includes the following: One ultra-high yield CMY dye ink cartridge and PTCreate Standard software for importing images and cutting a variety of label shapes. PTCreate Pro is available for an additional purchase and is necessary for contour cutting..
Check StockCraftsman 75 pc Inch & Metric tap and die Set
- Combines inch and metric sizes in 1 convenient kit.
- Set includes: 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies & sturdy storage case with handle.
- Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.
- Hex-shaped dies permit use of sockets and wrenches as well as die stocks.
- Rust-resistant satin finish for smooth cuts with less friction.
Check StockAlveyTech 11x7.10-5 PVC Plastic Tire Sleeve for Drift Trikes & Go-Karts
- The ROP Shop replacement 36 Inch Shaft Kit for Trike Drift Bikes includes (2) Go Kart Tires 11x6.00-5.
- Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check StockThe ROP Shop | Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft Axle
- The ROP Shop replacement Shaft Kit for Drift Trike Bikes includes 36 Inch Tubular Aluminum Shaft, Axle.
- Specs - Shaft Size: 36". Chain Type: #420. Wheel Size: 11 x 6.00 x 5. Maximum Weight Limit: 330 lbs. Refer to images 2 & 3 for more information.
- Includes - (1) 36" Tubular Aluminum Shaft Axle, (2) Racing Slick Tires with Aluminum Wheels (11x6.00-5), (1) Sprocket (54T), (1) Sprocket Hub Adapter Plate, (1) Chain (#420), (2) Bearing Hangers, (4) Bearing Flangettes, (2) Aluminum Race Hubs with 1 1/4" Bore, (1) Clutch with 3/4" Bore (10T, #420), (2) Axle Bearings, (4) Lock Collars, (3) Key Stocks, (6) Axle Nuts, (6) Bolts, (6) Nuts & (2) Snap Rings.
- This kit is used for many Drift Trike Bikes.
- Please be sure to check your part or model number to ensure this is the correct shaft axle wheel kit for your unit. Also, please note this may replace multiple part numbers.
Check StockAnwenk Heavy Duty Nutcracker Pecan Walnut Plier Opener Tool with Wood Handle
- Heavy duty spring loaded nutcracker - Easy cracking nuts, pecan,hazelnuts, almonds, walnut, brazil nuts, etc. NOTE: MAY NOT WORK FOR HARD BLACK WALNUT,MACADAMIA AND SIMILAR HARD SHELL NUTS..
- More convenient to use compare with traditional crackers - Save using this cracker without injuring yourself with traditional cracker and makes cracking nuts a lot of fun!.
- High Quality Wood Handles- Can hold on tight for perfect cracking, Instead of whole metal handle that chill you hand, this wood handle cracker is your best choice to crack nuts in cold winter!!.
- Material: Enameled die casting aluminum with high quality wood handles which can hold on tight for perfect cracking..
- Total Length:(approx.) 6.89". (This product can also work as a bottle opener.)..
Check Stock